(subset) [PATCH v3 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy

Heiko Stuebner heiko at sntech.de
Mon Dec 27 16:48:27 PST 2021


On Wed, 15 Dec 2021 16:02:44 -0500, Peter Geis wrote:
> Good Afternoon,
> 
> This is my series to support the usb2 phy devices on the rk356x.
> The rk356x phy has a single muxed interrupt and has moved the usb2phy
> nodes out of the grf and into their own nodes.
> The phy needs to tie back into the grf for register control, similar to
> the rv1108.
> By moving the phys into their own nodes, they now have full
> #address_cells = 2 register addresses, but they still reside below the 32bit
> mmio range.
> 
> [...]

Applied, thanks!

[1/8] dt-bindings: soc: rockchip: add rk3568-usb2phy-grf
      commit: 0c8662341dfdda1e0a59692e4d78ecb087f09da1
[7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree
      commit: cca4da59db28cdd284d34835be9f109f37bf0803
[8/8] arm64: dts: rockchip: add Quartz64-A usb2 support
      commit: 80d44c01e56943fcf9d0b5267ccfaa9487ac8067

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>



More information about the linux-arm-kernel mailing list