[PATCH] ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group

[Fabio Estevam]

Currently, SD card fails to mount due to the following pinctrl error:

[   11.170000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for 80010000.spi
[   11.180000] imx23-pinctrl 80018000.pinctrl: pin-65 (80010000.spi) status -22
[   11.190000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group mmc0-pins-fixup.0  on device 80018000.pinctrl
[   11.200000] mxs-mmc 80010000.spi: Error applying setting, reverse things back

Fix it by removing the MX23_PAD_SSP1_DETECT pin from the hog group as it
is already been used by the mmc0-pins-fixup pinctrl group.

With this change the rootfs can be mounted and the imx23-evk board can
boot successfully.

Cc: <stable at vger.kernel.org>
Fixes: bc3875f1a61e ("ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers")
Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
 arch/arm/boot/dts/imx23-evk.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@ hog_pins_a: hog at 0 {
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-- 
2.25.1