[PATCH v5 1/2] dt-bindings: pinctrl: Add dt-bindings for Sunplus SP7021
Rob Herring
robh at kernel.org
Mon Dec 27 08:10:25 PST 2021
On Fri, Dec 24, 2021 at 03:42:58PM +0800, Wells Lu wrote:
> Add dt-bindings header files and documentation for Sunplus SP7021 SoC.
>
> Signed-off-by: Wells Lu <wellslutw at gmail.com>
> ---
> Changes in V5
> - Removed "GPIOXT2" registers
>
> .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml | 373 +++++++++++++++++++++
> MAINTAINERS | 9 +
> include/dt-bindings/pinctrl/sppctl-sp7021.h | 171 ++++++++++
> include/dt-bindings/pinctrl/sppctl.h | 30 ++
> 4 files changed, 583 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> create mode 100644 include/dt-bindings/pinctrl/sppctl-sp7021.h
> create mode 100644 include/dt-bindings/pinctrl/sppctl.h
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> new file mode 100644
> index 0000000..2672169
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> @@ -0,0 +1,373 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) Sunplus Co., Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sunplus SP7021 Pin Controller Device Tree Bindings
> +
> +maintainers:
> + - Dvorkin Dmitry <dvorkin at tibbo.com>
> + - Wells Lu <wellslutw at gmail.com>
> +
> +description: |
> + The Sunplus SP7021 pin controller is used to control SoC pins. Please
> + refer to pinctrl-bindings.txt in this directory for details of the common
> + pinctrl bindings used by client devices.
> +
> + SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All
> + are multiplexed with some special function pins. SP7021 has 3 types of
> + special function pins:
> +
> + (1) function-group pins:
> + Ex 1 (SPI-NOR flash):
> + If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87
> + will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79
> + and 81 will be pins of SPI-NOR flash.
> +
> + Ex 2 (UART_0):
> + If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and
> + RX pins of UART_0 (UART channel 0).
> +
> + Ex 3 (eMMC):
> + If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77,
> + 78, 79, 80, 81 will be pins of an eMMC device.
> +
> + Properties "function" and "groups" are used to select function-group
> + pins.
> +
> + (2) fully pin-mux (like phone exchange mux) pins:
> + GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of
> + SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.)
> + can be routed to any pins of fully pin-mux pins.
> +
> + Ex 1 (UART channel 1):
> + If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be
> + routed to GPIO 10 (3 - 1 + 8 = 10).
> + If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be
> + routed to GPIO 11 (4 - 1 + 8 = 11).
> + If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will
> + be routed to GPIO 12 (5 - 1 + 8 = 12).
> + If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will
> + be routed to GPIO 13 (6 - 1 + 8 = 13).
> +
> + Ex 2 (I2C channel 0):
> + If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will
> + be routed to GPIO 27 (20 - 1 + 8 = 27).
> + If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0
> + will be routed to GPIO 28 (21 - 1 + 9 = 28).
> +
> + Totally, SP7021 has 120 peripheral pins. The peripheral pins can be
> + routed to any of 64 'fully pin-mux' pins.
> +
> + (3) I/O processor pins
> + SP7021 has a built-in I/O processor.
> + Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor.
> +
> + Vendor property "sunplus,pins" is used to select "fully pin-mux" pins,
> + "I/O processor pins" and "digital GPIO" pins.
> +
> + The device node of pin controller of Sunplus SP7021 has following
> + properties.
> +
> +properties:
> + compatible:
> + const: sunplus,sp7021-pctl
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + reg:
> + items:
> + - description: the MOON2 registers
> + - description: the GPIOXT registers
> + - description: the FIRST registers
> + - description: the MOON1 registers
> +
> + reg-names:
> + items:
> + - const: moon2
> + - const: gpioxt
> + - const: first
> + - const: moon1
> +
> + clocks:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> +patternProperties:
> + '-pins$':
> + type: object
> + description: |
> + A pinctrl node should contain at least one subnodes representing the
> + pins or function-pins group available on the machine. Each subnode
> + will list the pins it needs, and how they should be configured.
> +
> + Pinctrl node's client devices use subnodes for desired pin
> + configuration. Client device subnodes use below standard properties.
Need a $ref to pinmux-node.yaml
> +
> + properties:
> + sunplus,pins:
Can't you just use 'pins' here?
> + description: |
> + Define 'sunplus,pins' which are used by pinctrl node's client
> + device.
> +
> + It consists of one or more integers which represents the config
> + setting for corresponding pin. Each integer defines a individual
> + pin in which:
> +
> + Bit 32~24: defines GPIO number. Its range is 0 ~ 98.
> + Bit 23~16: defines types: (1) fully pin-mux pins
> + (2) IO processor pins
> + (3) digital GPIO pins
> + Bit 15~8: defines pins of peripherals (which are defined in
> + 'include/dt-binging/pinctrl/sppctl.h').
> + Bit 7~0: defines types or initial-state of digital GPIO pins.
> +
> + Please use macro SPPCTL_IOPAD to define the integers for pins.
> +
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> + function:
> + description: |
> + Define pin-function which is used by pinctrl node's client device.
> + The name should be one of string in the following enumeration.
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
> + UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
> +
> + groups:
> + description: |
> + Define pin-group in a specified pin-function.
> + The name should be one of string in the following enumeration.
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
> + SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
> + HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
> +
> + sunplus,zero_func:
Don't use '_' in property names.
> + description: |
> + This is a vendor specific property. It is used to disable pins
> + which are not used by pinctrl node's client device.
> + Some pins may be enabled by boot-loader. We can use this
> + property to disable them.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
IMO, disabled pins should be unused by the board design, not ones the
bootloader failed to disable.
> +
> + additionalProperties: false
> +
> + allOf:
> + - if:
> + properties:
> + function:
> + enum:
> + - SPI_FLASH
> + then:
> + properties:
> + groups:
> + enum:
> + - SPI_FLASH1
> + - SPI_FLASH2
> + - if:
> + properties:
> + function:
> + enum:
> + - SPI_FLASH_4BIT
> + then:
> + properties:
> + groups:
> + enum:
> + - SPI_FLASH_4BIT1
> + - SPI_FLASH_4BIT2
> + - if:
> + properties:
> + function:
> + enum:
> + - SPI_NAND
> + then:
> + properties:
> + groups:
> + enum:
> + - SPI_NAND
> + - if:
> + properties:
> + function:
> + enum:
> + - CARD0_EMMC
> + then:
> + properties:
> + groups:
> + enum:
> + - CARD0_EMMC
> + - if:
> + properties:
> + function:
> + enum:
> + - SD_CARD
> + then:
> + properties:
> + groups:
> + enum:
> + - SD_CARD
> + - if:
> + properties:
> + function:
> + enum:
> + - UA0
> + then:
> + properties:
> + groups:
> + enum:
> + - UA0
> + - if:
> + properties:
> + function:
> + enum:
> + - FPGA_IFX
> + then:
> + properties:
> + groups:
> + enum:
> + - FPGA_IFX
> + - if:
> + properties:
> + function:
> + enum:
> + - HDMI_TX
> + then:
> + properties:
> + groups:
> + enum:
> + - HDMI_TX1
> + - HDMI_TX2
> + - HDMI_TX3
> + - if:
> + properties:
> + function:
> + enum:
> + - LCDIF
> + then:
> + properties:
> + groups:
> + enum:
> + - LCDIF
> + - if:
> + properties:
> + function:
> + enum:
> + - USB0_OTG
> + then:
> + properties:
> + groups:
> + enum:
> + - USB0_OTG
> + - if:
> + properties:
> + function:
> + enum:
> + - USB1_OTG
> + then:
> + properties:
> + groups:
> + enum:
> + - USB1_OTG
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - "#gpio-cells"
> + - gpio-controller
> + - clocks
> + - resets
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/sppctl-sp7021.h>
> +
> + pinctl at 9c000100 {
> + compatible = "sunplus,sp7021-pctl";
> + reg = <0x9c000100 0x100>, <0x9c000300 0x100>,
> + <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
> + reg-names = "moon2", "gpioxt", "first", "moon1";
> + gpio-controller;
> + #gpio-cells = <2>;
> + clocks = <&clkc 0x83>;
> + resets = <&rstc 0x73>;
> +
> + uart0-pins {
> + function = "UA0";
> + groups = "UA0";
> + };
> +
> + spinand0-pins {
> + function = "SPI_NAND";
> + groups = "SPI_NAND";
> + };
> +
> + uart1-pins {
> + sunplus,pins = <
> + SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
> + SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
> + >;
> + };
> +
> + uart2-pins {
> + sunplus,pins = <
> + SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
> + SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
> + SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
> + SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
> + >;
> + };
> +
> + emmc-pins {
> + function = "CARD0_EMMC";
> + groups = "CARD0_EMMC";
> + };
> +
> + sdcard-pins {
> + function = "SD_CARD";
> + groups = "SD_CARD";
> + sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
> + };
> +
> + hdmi_A_tx1-pins {
> + function = "HDMI_TX";
> + groups = "HDMI_TX1";
> + };
> + hdmi_A_tx2-pins {
> + function = "HDMI_TX";
> + groups = "HDMI_TX2";
> + };
> + hdmi_A_tx3-pins {
> + function = "HDMI_TX";
> + groups = "HDMI_TX3";
> + };
> +
> + ethernet-pins {
> + sunplus,pins = <
> + SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
> + SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
> + SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
> + SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
> + SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
> + SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
> + SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
> + SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
> + SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
> + >;
> + sunplus,zero_func = <
> + MUXF_L2SW_LED_FLASH0
> + MUXF_L2SW_LED_ON0
> + MUXF_L2SW_P0_MAC_RMII_RXER
> + >;
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8912b2c..6b1cfc2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15127,6 +15127,15 @@ L: linux-omap at vger.kernel.org
> S: Maintained
> F: drivers/pinctrl/pinctrl-single.c
>
> +PIN CONTROLLER - SUNPLUS / TIBBO
> +M: Dvorkin Dmitry <dvorkin at tibbo.com>
> +M: Wells Lu <wellslutw at gmail.com>
> +L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
> +S: Maintained
> +W: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
> +F: Documentation/devicetree/bindings/pinctrl/sunplus,*
> +F: include/dt-bindings/pinctrl/sppctl*
> +
> PKTCDVD DRIVER
> M: linux-block at vger.kernel.org
> S: Orphan
> diff --git a/include/dt-bindings/pinctrl/sppctl-sp7021.h b/include/dt-bindings/pinctrl/sppctl-sp7021.h
> new file mode 100644
> index 0000000..8299ca1
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/sppctl-sp7021.h
> @@ -0,0 +1,171 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/* Sunplus SP7021 dt-bindings Pinctrl header file
> + * Copyright (C) Sunplus Tech/Tibbo Tech.
> + * Author: Dvorkin Dmitry <dvorkin at tibbo.com>
> + */
> +
> +#ifndef __DT_BINDINGS_PINCTRL_SPPCTL_SP7021_H__
> +#define __DT_BINDINGS_PINCTRL_SPPCTL_SP7021_H__
> +
> +#include <dt-bindings/pinctrl/sppctl.h>
> +
> +/* Please don't change the order of the
> + * following defines. They are based on
> + * order of control register define of
> + * MOON1 ~ MOON4 registers.
> + */
> +#define MUXF_L2SW_CLK_OUT 0
> +#define MUXF_L2SW_MAC_SMI_MDC 1
> +#define MUXF_L2SW_LED_FLASH0 2
> +#define MUXF_L2SW_LED_FLASH1 3
> +#define MUXF_L2SW_LED_ON0 4
> +#define MUXF_L2SW_LED_ON1 5
> +#define MUXF_L2SW_MAC_SMI_MDIO 6
> +#define MUXF_L2SW_P0_MAC_RMII_TXEN 7
> +#define MUXF_L2SW_P0_MAC_RMII_TXD0 8
> +#define MUXF_L2SW_P0_MAC_RMII_TXD1 9
> +#define MUXF_L2SW_P0_MAC_RMII_CRSDV 10
> +#define MUXF_L2SW_P0_MAC_RMII_RXD0 11
> +#define MUXF_L2SW_P0_MAC_RMII_RXD1 12
> +#define MUXF_L2SW_P0_MAC_RMII_RXER 13
> +#define MUXF_L2SW_P1_MAC_RMII_TXEN 14
> +#define MUXF_L2SW_P1_MAC_RMII_TXD0 15
> +#define MUXF_L2SW_P1_MAC_RMII_TXD1 16
> +#define MUXF_L2SW_P1_MAC_RMII_CRSDV 17
> +#define MUXF_L2SW_P1_MAC_RMII_RXD0 18
> +#define MUXF_L2SW_P1_MAC_RMII_RXD1 19
> +#define MUXF_L2SW_P1_MAC_RMII_RXER 20
> +#define MUXF_DAISY_MODE 21
> +#define MUXF_SDIO_CLK 22
> +#define MUXF_SDIO_CMD 23
> +#define MUXF_SDIO_D0 24
> +#define MUXF_SDIO_D1 25
> +#define MUXF_SDIO_D2 26
> +#define MUXF_SDIO_D3 27
> +#define MUXF_PWM0 28
> +#define MUXF_PWM1 29
> +#define MUXF_PWM2 30
> +#define MUXF_PWM3 31
> +#define MUXF_PWM4 32
> +#define MUXF_PWM5 33
> +#define MUXF_PWM6 34
> +#define MUXF_PWM7 35
> +#define MUXF_ICM0_D 36
> +#define MUXF_ICM1_D 37
> +#define MUXF_ICM2_D 38
> +#define MUXF_ICM3_D 39
> +#define MUXF_ICM0_CLK 40
> +#define MUXF_ICM1_CLK 41
> +#define MUXF_ICM2_CLK 42
> +#define MUXF_ICM3_CLK 43
> +#define MUXF_SPIM0_INT 44
> +#define MUXF_SPIM0_CLK 45
> +#define MUXF_SPIM0_EN 46
> +#define MUXF_SPIM0_DO 47
> +#define MUXF_SPIM0_DI 48
> +#define MUXF_SPIM1_INT 49
> +#define MUXF_SPIM1_CLK 50
> +#define MUXF_SPIM1_EN 51
> +#define MUXF_SPIM1_DO 52
> +#define MUXF_SPIM1_DI 53
> +#define MUXF_SPIM2_INT 54
> +#define MUXF_SPIM2_CLK 55
> +#define MUXF_SPIM2_EN 56
> +#define MUXF_SPIM2_DO 57
> +#define MUXF_SPIM2_DI 58
> +#define MUXF_SPIM3_INT 59
> +#define MUXF_SPIM3_CLK 60
> +#define MUXF_SPIM3_EN 61
> +#define MUXF_SPIM3_DO 62
> +#define MUXF_SPIM3_DI 63
> +#define MUXF_SPI0S_INT 64
> +#define MUXF_SPI0S_CLK 65
> +#define MUXF_SPI0S_EN 66
> +#define MUXF_SPI0S_DO 67
> +#define MUXF_SPI0S_DI 68
> +#define MUXF_SPI1S_INT 69
> +#define MUXF_SPI1S_CLK 70
> +#define MUXF_SPI1S_EN 71
> +#define MUXF_SPI1S_DO 72
> +#define MUXF_SPI1S_DI 73
> +#define MUXF_SPI2S_INT 74
> +#define MUXF_SPI2S_CLK 75
> +#define MUXF_SPI2S_EN 76
> +#define MUXF_SPI2S_DO 77
> +#define MUXF_SPI2S_DI 78
> +#define MUXF_SPI3S_INT 79
> +#define MUXF_SPI3S_CLK 80
> +#define MUXF_SPI3S_EN 81
> +#define MUXF_SPI3S_DO 82
> +#define MUXF_SPI3S_DI 83
> +#define MUXF_I2CM0_CLK 84
> +#define MUXF_I2CM0_DAT 85
> +#define MUXF_I2CM1_CLK 86
> +#define MUXF_I2CM1_DAT 87
> +#define MUXF_I2CM2_CLK 88
> +#define MUXF_I2CM2_DAT 89
> +#define MUXF_I2CM3_CLK 90
> +#define MUXF_I2CM3_DAT 91
> +#define MUXF_UA1_TX 92
> +#define MUXF_UA1_RX 93
> +#define MUXF_UA1_CTS 94
> +#define MUXF_UA1_RTS 95
> +#define MUXF_UA2_TX 96
> +#define MUXF_UA2_RX 97
> +#define MUXF_UA2_CTS 98
> +#define MUXF_UA2_RTS 99
> +#define MUXF_UA3_TX 100
> +#define MUXF_UA3_RX 101
> +#define MUXF_UA3_CTS 102
> +#define MUXF_UA3_RTS 103
> +#define MUXF_UA4_TX 104
> +#define MUXF_UA4_RX 105
> +#define MUXF_UA4_CTS 106
> +#define MUXF_UA4_RTS 107
> +#define MUXF_TIMER0_INT 108
> +#define MUXF_TIMER1_INT 109
> +#define MUXF_TIMER2_INT 110
> +#define MUXF_TIMER3_INT 111
> +#define MUXF_GPIO_INT0 112
> +#define MUXF_GPIO_INT1 113
> +#define MUXF_GPIO_INT2 114
> +#define MUXF_GPIO_INT3 115
> +#define MUXF_GPIO_INT4 116
> +#define MUXF_GPIO_INT5 117
> +#define MUXF_GPIO_INT6 118
> +#define MUXF_GPIO_INT7 119
> +
> +#define GROP_SPI_FLASH 120
> +#define GROP_SPI_FLASH_4BIT 121
> +#define GROP_SPI_NAND 122
> +#define GROP_CARD0_EMMC 123
> +#define GROP_SD_CARD 124
> +#define GROP_UA0 125
> +#define GROP_ACHIP_DEBUG 126
> +#define GROP_ACHIP_UA2AXI 127
> +#define GROP_FPGA_IFX 128
> +#define GROP_HDMI_TX 129
> +#define GROP_AUD_EXT_ADC_IFX0 130
> +#define GROP_AUD_EXT_DAC_IFX0 131
> +#define GROP_SPDIF_RX 132
> +#define GROP_SPDIF_TX 133
> +#define GROP_TDMTX_IFX0 134
> +#define GROP_TDMRX_IFX0 135
> +#define GROP_PDMRX_IFX0 136
> +#define GROP_PCM_IEC_TX 137
> +#define GROP_LCDIF 138
> +#define GROP_DVD_DSP_DEBUG 139
> +#define GROP_I2C_DEBUG 140
> +#define GROP_I2C_SLAVE 141
> +#define GROP_WAKEUP 142
> +#define GROP_UART2AXI 143
> +#define GROP_USB0_I2C 144
> +#define GROP_USB1_I2C 145
> +#define GROP_USB0_OTG 146
> +#define GROP_USB1_OTG 147
> +#define GROP_UPHY0_DEBUG 148
> +#define GROP_UPHY1_DEBUG 149
> +#define GROP_UPHY0_EXT 150
> +#define GROP_PROBE_PORT 151
> +
> +#endif
> diff --git a/include/dt-bindings/pinctrl/sppctl.h b/include/dt-bindings/pinctrl/sppctl.h
> new file mode 100644
> index 0000000..8bf5457
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/sppctl.h
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/* Sunplus dt-bindings Pinctrl header file
> + * Copyright (C) Sunplus Tech / Tibbo Tech.
> + * Author: Dvorkin Dmitry <dvorkin at tibbo.com>
> + */
> +
> +#ifndef __DT_BINDINGS_PINCTRL_SPPCTL_H__
> +#define __DT_BINDINGS_PINCTRL_SPPCTL_H__
> +
> +#define IOP_G_MASTE (0x01 << 0)
> +#define IOP_G_FIRST (0x01 << 1)
> +
> +#define SPPCTL_PCTL_G_PMUX (0x00 | IOP_G_MASTE)
> +#define SPPCTL_PCTL_G_GPIO (IOP_G_FIRST | IOP_G_MASTE)
> +#define SPPCTL_PCTL_G_IOPP (IOP_G_FIRST | 0x00)
> +
> +#define SPPCTL_PCTL_L_OUT (0x01 << 0) /* Output LOW */
> +#define SPPCTL_PCTL_L_OU1 (0x01 << 1) /* Output HIGH */
> +#define SPPCTL_PCTL_L_INV (0x01 << 2) /* Input Invert */
> +#define SPPCTL_PCTL_L_ONV (0x01 << 3) /* Output Invert */
> +#define SPPCTL_PCTL_L_ODR (0x01 << 4) /* Output Open Drain */
> +
> +/*
> + * pack into 32-bit value:
> + * pin#(8bit), typ(8bit), function(8bit), flag(8bit)
> + */
> +#define SPPCTL_IOPAD(pin, typ, fun, flg) (((pin) << 24) | ((typ) << 16) | \
> + ((fun) << 8) | (flg))
> +
> +#endif
> --
> 2.7.4
>
>
More information about the linux-arm-kernel
mailing list