[PATCH 1/3] dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the interrupt

[Lad, Prabhakar]

Hi Andy,

Thank you for the review.

On Sat, Dec 25, 2021 at 5:47 PM Andy Shevchenko
<andy.shevchenko at gmail.com> wrote:
>
> On Fri, Dec 24, 2021 at 3:14 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj at bp.renesas.com> wrote:
> >
> > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> > allocation of IRQ resources in DT core code, this causes an issue
> > when using hierarchical interrupt domains using "interrupts" property
> > in the node as this bypasses the hierarchical setup and messes up the
> > irq chaining.
> >
> > In preparation for removal of static setup of IRQ resource from DT core
> > code use platform_get_irq_optional().
> >
> > There are no non-DT users for this driver so interrupt range
> > (irq_res->start-irq_res->end) is no longer required and with DT we will
> > be sure it will be a single IRQ resource for each index.
>
> >         for (i = 0; irqs < ARRAY_SIZE(irqbuf); i++) {
> > -               irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
> > -               if (!irq_res)
> > +               irq = platform_get_irq_optional(pdev, i);
> > +               if (irq == -ENXIO)
> >                         break;
> > -
> > -               for (irq = irq_res->start; irq <= irq_res->end;
> > -                    irq++, irqs++)
> > -                       irqbuf[irqs] = irq;
> > +               if (irq < 0)
> > +                       return irq;
> > +               irqbuf[irqs++] = irq;
> >         }
>
> Same comment as per other patch(es), i.e. consider 0 as no IRQ.
>
Will do.

Cheers,
Prabhakar