[PATCH-next 1/2] arm64: dts: ti: k3-j721s2: Move aliases to board dts

Vignesh Raghavendra vigneshr at ti.com
Thu Dec 23 04:16:49 PST 2021


From: Aswath Govindraju <a-govindraju at ti.com>

Aliases are board specific and should be in board dts files.
So, move aliases to board dts and trim the list to interfaces that are
actually enabled.

Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 10 +++++++++
 arch/arm64/boot/dts/ti/k3-j721s2.dtsi         | 22 -------------------
 2 files changed, 10 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a5a24f9f46c5..708c14338eb7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -19,6 +19,16 @@ chosen {
 		bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000";
 	};
 
+	aliases {
+		serial1 = &mcu_uart0;
+		serial10 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		can0 = &main_mcan16;
+		can1 = &mcu_mcan0;
+		can2 = &mcu_mcan1;
+	};
+
 	evm_12v0: fixedregulator-evm12v0 {
 		/* main supply */
 		compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 80d3cae03e88..fe5234c40f6c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -21,28 +21,6 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases {
-		serial0 = &wkup_uart0;
-		serial1 = &mcu_uart0;
-		serial2 = &main_uart0;
-		serial3 = &main_uart1;
-		serial4 = &main_uart2;
-		serial5 = &main_uart3;
-		serial6 = &main_uart4;
-		serial7 = &main_uart5;
-		serial8 = &main_uart6;
-		serial9 = &main_uart7;
-		serial10 = &main_uart8;
-		serial11 = &main_uart9;
-		mmc0 = &main_sdhci0;
-		mmc1 = &main_sdhci1;
-		can0 = &main_mcan16;
-		can1 = &mcu_mcan0;
-		can2 = &mcu_mcan1;
-		can3 = &main_mcan3;
-		can4 = &main_mcan5;
-	};
-
 	chosen { };
 
 	cpus {
-- 
2.34.1




More information about the linux-arm-kernel mailing list