[PATCH v3] serial: mps2-uart: Check for error irq
Jiasheng Jiang
jiasheng at iscas.ac.cn
Thu Dec 23 04:14:18 PST 2021
Because of the possible failure of the platform_get_irq(), it should be
better to check it to avoid the use of error irq.
Fixes: 041f031def33 ("serial: mps2-uart: add MPS2 UART driver")
Signed-off-by: Jiasheng Jiang <jiasheng at iscas.ac.cn>
---
Changelog:
v2 -> v3
*Change 1. Using error variable to check.
*Change 2. Add new commit message.
---
drivers/tty/serial/mps2-uart.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
index 587b42f754cb..24a52300d8d9 100644
--- a/drivers/tty/serial/mps2-uart.c
+++ b/drivers/tty/serial/mps2-uart.c
@@ -584,11 +584,29 @@ static int mps2_init_port(struct platform_device *pdev,
if (mps_port->flags & UART_PORT_COMBINED_IRQ) {
- mps_port->port.irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+
+ mps_port->port.irq = ret;
} else {
- mps_port->rx_irq = platform_get_irq(pdev, 0);
- mps_port->tx_irq = platform_get_irq(pdev, 1);
- mps_port->port.irq = platform_get_irq(pdev, 2);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+
+ mps_port->rx_irq = ret;
+
+ ret = platform_get_irq(pdev, 1);
+ if (ret < 0)
+ return ret;
+
+ mps_port->tx_irq = ret;
+
+ ret = platform_get_irq(pdev, 2);
+ if (ret < 0)
+ return ret;
+
+ mps_port->port.irq = ret;
}
return ret;
--
2.25.1
More information about the linux-arm-kernel
mailing list