[PATCH v3 5/6] crypto: x86/sm3 - add AVX assembly implementation
Tianjia Zhang
tianjia.zhang at linux.alibaba.com
Wed Dec 22 20:35:46 PST 2021
This patch adds AVX assembly accelerated implementation of SM3 secure
hash algorithm. From the benchmark data, compared to pure software
implementation sm3-generic, the performance increase is up to 38%.
The main algorithm implementation based on SM3 AES/BMI2 accelerated
work by libgcrypt at:
https://gnupg.org/software/libgcrypt/index.html
Benchmark on Intel i5-6200U 2.30GHz, performance data of two
implementations, pure software sm3-generic and sm3-avx acceleration.
The data comes from the 326 mode and 422 mode of tcrypt. The abscissas
are different lengths of per update. The data is tabulated and the
unit is Mb/s:
update-size | 16 64 256 1024 2048 4096 8192
--------------------------------------------------------------------
sm3-generic | 105.97 129.60 182.12 189.62 188.06 193.66 194.88
sm3-avx | 119.87 163.05 244.44 260.92 257.60 264.87 265.88
Signed-off-by: Tianjia Zhang <tianjia.zhang at linux.alibaba.com>
---
arch/x86/crypto/Makefile | 3 +
arch/x86/crypto/sm3-avx-asm_64.S | 517 +++++++++++++++++++++++++++++++
arch/x86/crypto/sm3_avx_glue.c | 134 ++++++++
crypto/Kconfig | 13 +
4 files changed, 667 insertions(+)
create mode 100644 arch/x86/crypto/sm3-avx-asm_64.S
create mode 100644 arch/x86/crypto/sm3_avx_glue.c
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index f307c93fc90a..7cbe860f6201 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -88,6 +88,9 @@ nhpoly1305-avx2-y := nh-avx2-x86_64.o nhpoly1305-avx2-glue.o
obj-$(CONFIG_CRYPTO_CURVE25519_X86) += curve25519-x86_64.o
+obj-$(CONFIG_CRYPTO_SM3_AVX_X86_64) += sm3-avx-x86_64.o
+sm3-avx-x86_64-y := sm3-avx-asm_64.o sm3_avx_glue.o
+
obj-$(CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64) += sm4-aesni-avx-x86_64.o
sm4-aesni-avx-x86_64-y := sm4-aesni-avx-asm_64.o sm4_aesni_avx_glue.o
diff --git a/arch/x86/crypto/sm3-avx-asm_64.S b/arch/x86/crypto/sm3-avx-asm_64.S
new file mode 100644
index 000000000000..71e6aae23e17
--- /dev/null
+++ b/arch/x86/crypto/sm3-avx-asm_64.S
@@ -0,0 +1,517 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM3 AVX accelerated transform.
+ * specified in: https://datatracker.ietf.org/doc/html/draft-sca-cfrg-sm3-02
+ *
+ * Copyright (C) 2021 Jussi Kivilinna <jussi.kivilinna at iki.fi>
+ * Copyright (C) 2021 Tianjia Zhang <tianjia.zhang at linux.alibaba.com>
+ */
+
+/* Based on SM3 AES/BMI2 accelerated work by libgcrypt at:
+ * https://gnupg.org/software/libgcrypt/index.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/frame.h>
+
+/* Context structure */
+
+#define state_h0 0
+#define state_h1 4
+#define state_h2 8
+#define state_h3 12
+#define state_h4 16
+#define state_h5 20
+#define state_h6 24
+#define state_h7 28
+
+/* Constants */
+
+/* Round constant macros */
+
+#define K0 2043430169 /* 0x79cc4519 */
+#define K1 -208106958 /* 0xf3988a32 */
+#define K2 -416213915 /* 0xe7311465 */
+#define K3 -832427829 /* 0xce6228cb */
+#define K4 -1664855657 /* 0x9cc45197 */
+#define K5 965255983 /* 0x3988a32f */
+#define K6 1930511966 /* 0x7311465e */
+#define K7 -433943364 /* 0xe6228cbc */
+#define K8 -867886727 /* 0xcc451979 */
+#define K9 -1735773453 /* 0x988a32f3 */
+#define K10 823420391 /* 0x311465e7 */
+#define K11 1646840782 /* 0x6228cbce */
+#define K12 -1001285732 /* 0xc451979c */
+#define K13 -2002571463 /* 0x88a32f39 */
+#define K14 289824371 /* 0x11465e73 */
+#define K15 579648742 /* 0x228cbce6 */
+#define K16 -1651869049 /* 0x9d8a7a87 */
+#define K17 991229199 /* 0x3b14f50f */
+#define K18 1982458398 /* 0x7629ea1e */
+#define K19 -330050500 /* 0xec53d43c */
+#define K20 -660100999 /* 0xd8a7a879 */
+#define K21 -1320201997 /* 0xb14f50f3 */
+#define K22 1654563303 /* 0x629ea1e7 */
+#define K23 -985840690 /* 0xc53d43ce */
+#define K24 -1971681379 /* 0x8a7a879d */
+#define K25 351604539 /* 0x14f50f3b */
+#define K26 703209078 /* 0x29ea1e76 */
+#define K27 1406418156 /* 0x53d43cec */
+#define K28 -1482130984 /* 0xa7a879d8 */
+#define K29 1330705329 /* 0x4f50f3b1 */
+#define K30 -1633556638 /* 0x9ea1e762 */
+#define K31 1027854021 /* 0x3d43cec5 */
+#define K32 2055708042 /* 0x7a879d8a */
+#define K33 -183551212 /* 0xf50f3b14 */
+#define K34 -367102423 /* 0xea1e7629 */
+#define K35 -734204845 /* 0xd43cec53 */
+#define K36 -1468409689 /* 0xa879d8a7 */
+#define K37 1358147919 /* 0x50f3b14f */
+#define K38 -1578671458 /* 0xa1e7629e */
+#define K39 1137624381 /* 0x43cec53d */
+#define K40 -2019718534 /* 0x879d8a7a */
+#define K41 255530229 /* 0x0f3b14f5 */
+#define K42 511060458 /* 0x1e7629ea */
+#define K43 1022120916 /* 0x3cec53d4 */
+#define K44 2044241832 /* 0x79d8a7a8 */
+#define K45 -206483632 /* 0xf3b14f50 */
+#define K46 -412967263 /* 0xe7629ea1 */
+#define K47 -825934525 /* 0xcec53d43 */
+#define K48 -1651869049 /* 0x9d8a7a87 */
+#define K49 991229199 /* 0x3b14f50f */
+#define K50 1982458398 /* 0x7629ea1e */
+#define K51 -330050500 /* 0xec53d43c */
+#define K52 -660100999 /* 0xd8a7a879 */
+#define K53 -1320201997 /* 0xb14f50f3 */
+#define K54 1654563303 /* 0x629ea1e7 */
+#define K55 -985840690 /* 0xc53d43ce */
+#define K56 -1971681379 /* 0x8a7a879d */
+#define K57 351604539 /* 0x14f50f3b */
+#define K58 703209078 /* 0x29ea1e76 */
+#define K59 1406418156 /* 0x53d43cec */
+#define K60 -1482130984 /* 0xa7a879d8 */
+#define K61 1330705329 /* 0x4f50f3b1 */
+#define K62 -1633556638 /* 0x9ea1e762 */
+#define K63 1027854021 /* 0x3d43cec5 */
+
+/* Register macros */
+
+#define RSTATE %rdi
+#define RDATA %rsi
+#define RNBLKS %rdx
+
+#define t0 %eax
+#define t1 %ebx
+#define t2 %ecx
+
+#define a %r8d
+#define b %r9d
+#define c %r10d
+#define d %r11d
+#define e %r12d
+#define f %r13d
+#define g %r14d
+#define h %r15d
+
+#define W0 %xmm0
+#define W1 %xmm1
+#define W2 %xmm2
+#define W3 %xmm3
+#define W4 %xmm4
+#define W5 %xmm5
+
+#define XTMP0 %xmm6
+#define XTMP1 %xmm7
+#define XTMP2 %xmm8
+#define XTMP3 %xmm9
+#define XTMP4 %xmm10
+#define XTMP5 %xmm11
+#define XTMP6 %xmm12
+
+#define BSWAP_REG %xmm15
+
+/* Stack structure */
+
+#define STACK_W_SIZE (32 * 2 * 3)
+#define STACK_REG_SAVE_SIZE (64)
+
+#define STACK_W (0)
+#define STACK_REG_SAVE (STACK_W + STACK_W_SIZE)
+#define STACK_SIZE (STACK_REG_SAVE + STACK_REG_SAVE_SIZE)
+
+/* Instruction helpers. */
+
+#define roll2(v, reg) \
+ roll $(v), reg;
+
+#define roll3mov(v, src, dst) \
+ movl src, dst; \
+ roll $(v), dst;
+
+#define roll3(v, src, dst) \
+ rorxl $(32-(v)), src, dst;
+
+#define addl2(a, out) \
+ leal (a, out), out;
+
+/* Round function macros. */
+
+#define GG1(x, y, z, o, t) \
+ movl x, o; \
+ xorl y, o; \
+ xorl z, o;
+
+#define FF1(x, y, z, o, t) GG1(x, y, z, o, t)
+
+#define GG2(x, y, z, o, t) \
+ andnl z, x, o; \
+ movl y, t; \
+ andl x, t; \
+ addl2(t, o);
+
+#define FF2(x, y, z, o, t) \
+ movl y, o; \
+ xorl x, o; \
+ movl y, t; \
+ andl x, t; \
+ andl z, o; \
+ xorl t, o;
+
+#define R(i, a, b, c, d, e, f, g, h, round, widx, wtype) \
+ /* rol(a, 12) => t0 */ \
+ roll3mov(12, a, t0); /* rorxl here would reduce perf by 6% on zen3 */ \
+ /* rol (t0 + e + t), 7) => t1 */ \
+ leal K##round(t0, e, 1), t1; \
+ roll2(7, t1); \
+ /* h + w1 => h */ \
+ addl wtype##_W1_ADDR(round, widx), h; \
+ /* h + t1 => h */ \
+ addl2(t1, h); \
+ /* t1 ^ t0 => t0 */ \
+ xorl t1, t0; \
+ /* w1w2 + d => d */ \
+ addl wtype##_W1W2_ADDR(round, widx), d; \
+ /* FF##i(a,b,c) => t1 */ \
+ FF##i(a, b, c, t1, t2); \
+ /* d + t1 => d */ \
+ addl2(t1, d); \
+ /* GG#i(e,f,g) => t2 */ \
+ GG##i(e, f, g, t2, t1); \
+ /* h + t2 => h */ \
+ addl2(t2, h); \
+ /* rol (f, 19) => f */ \
+ roll2(19, f); \
+ /* d + t0 => d */ \
+ addl2(t0, d); \
+ /* rol (b, 9) => b */ \
+ roll2(9, b); \
+ /* P0(h) => h */ \
+ roll3(9, h, t2); \
+ roll3(17, h, t1); \
+ xorl t2, h; \
+ xorl t1, h;
+
+#define R1(a, b, c, d, e, f, g, h, round, widx, wtype) \
+ R(1, a, b, c, d, e, f, g, h, round, widx, wtype)
+
+#define R2(a, b, c, d, e, f, g, h, round, widx, wtype) \
+ R(2, a, b, c, d, e, f, g, h, round, widx, wtype)
+
+/* Input expansion macros. */
+
+/* Byte-swapped input address. */
+#define IW_W_ADDR(round, widx, offs) \
+ (STACK_W + ((round) / 4) * 64 + (offs) + ((widx) * 4))(%rsp)
+
+/* Expanded input address. */
+#define XW_W_ADDR(round, widx, offs) \
+ (STACK_W + ((((round) / 3) - 4) % 2) * 64 + (offs) + ((widx) * 4))(%rsp)
+
+/* Rounds 1-12, byte-swapped input block addresses. */
+#define IW_W1_ADDR(round, widx) IW_W_ADDR(round, widx, 0)
+#define IW_W1W2_ADDR(round, widx) IW_W_ADDR(round, widx, 32)
+
+/* Rounds 1-12, expanded input block addresses. */
+#define XW_W1_ADDR(round, widx) XW_W_ADDR(round, widx, 0)
+#define XW_W1W2_ADDR(round, widx) XW_W_ADDR(round, widx, 32)
+
+/* Input block loading. */
+#define LOAD_W_XMM_1() \
+ vmovdqu 0*16(RDATA), XTMP0; /* XTMP0: w3, w2, w1, w0 */ \
+ vmovdqu 1*16(RDATA), XTMP1; /* XTMP1: w7, w6, w5, w4 */ \
+ vmovdqu 2*16(RDATA), XTMP2; /* XTMP2: w11, w10, w9, w8 */ \
+ vmovdqu 3*16(RDATA), XTMP3; /* XTMP3: w15, w14, w13, w12 */ \
+ vpshufb BSWAP_REG, XTMP0, XTMP0; \
+ vpshufb BSWAP_REG, XTMP1, XTMP1; \
+ vpshufb BSWAP_REG, XTMP2, XTMP2; \
+ vpshufb BSWAP_REG, XTMP3, XTMP3; \
+ vpxor XTMP0, XTMP1, XTMP4; \
+ vpxor XTMP1, XTMP2, XTMP5; \
+ vpxor XTMP2, XTMP3, XTMP6; \
+ leaq 64(RDATA), RDATA; \
+ vmovdqa XTMP0, IW_W1_ADDR(0, 0); \
+ vmovdqa XTMP4, IW_W1W2_ADDR(0, 0); \
+ vmovdqa XTMP1, IW_W1_ADDR(4, 0); \
+ vmovdqa XTMP5, IW_W1W2_ADDR(4, 0);
+
+#define LOAD_W_XMM_2() \
+ vmovdqa XTMP2, IW_W1_ADDR(8, 0); \
+ vmovdqa XTMP6, IW_W1W2_ADDR(8, 0);
+
+#define LOAD_W_XMM_3() \
+ vpshufd $0b00000000, XTMP0, W0; /* W0: xx, w0, xx, xx */ \
+ vpshufd $0b11111001, XTMP0, W1; /* W1: xx, w3, w2, w1 */ \
+ vmovdqa XTMP1, W2; /* W2: xx, w6, w5, w4 */ \
+ vpalignr $12, XTMP1, XTMP2, W3; /* W3: xx, w9, w8, w7 */ \
+ vpalignr $8, XTMP2, XTMP3, W4; /* W4: xx, w12, w11, w10 */ \
+ vpshufd $0b11111001, XTMP3, W5; /* W5: xx, w15, w14, w13 */
+
+/* Message scheduling. Note: 3 words per XMM register. */
+#define SCHED_W_0(round, w0, w1, w2, w3, w4, w5) \
+ /* Load (w[i - 16]) => XTMP0 */ \
+ vpshufd $0b10111111, w0, XTMP0; \
+ vpalignr $12, XTMP0, w1, XTMP0; /* XTMP0: xx, w2, w1, w0 */ \
+ /* Load (w[i - 13]) => XTMP1 */ \
+ vpshufd $0b10111111, w1, XTMP1; \
+ vpalignr $12, XTMP1, w2, XTMP1; \
+ /* w[i - 9] == w3 */ \
+ /* XMM3 ^ XTMP0 => XTMP0 */ \
+ vpxor w3, XTMP0, XTMP0;
+
+#define SCHED_W_1(round, w0, w1, w2, w3, w4, w5) \
+ /* w[i - 3] == w5 */ \
+ /* rol(XMM5, 15) ^ XTMP0 => XTMP0 */ \
+ vpslld $15, w5, XTMP2; \
+ vpsrld $(32-15), w5, XTMP3; \
+ vpxor XTMP2, XTMP3, XTMP3; \
+ vpxor XTMP3, XTMP0, XTMP0; \
+ /* rol(XTMP1, 7) => XTMP1 */ \
+ vpslld $7, XTMP1, XTMP5; \
+ vpsrld $(32-7), XTMP1, XTMP1; \
+ vpxor XTMP5, XTMP1, XTMP1; \
+ /* XMM4 ^ XTMP1 => XTMP1 */ \
+ vpxor w4, XTMP1, XTMP1; \
+ /* w[i - 6] == XMM4 */ \
+ /* P1(XTMP0) ^ XTMP1 => XMM0 */ \
+ vpslld $15, XTMP0, XTMP5; \
+ vpsrld $(32-15), XTMP0, XTMP6; \
+ vpslld $23, XTMP0, XTMP2; \
+ vpsrld $(32-23), XTMP0, XTMP3; \
+ vpxor XTMP0, XTMP1, XTMP1; \
+ vpxor XTMP6, XTMP5, XTMP5; \
+ vpxor XTMP3, XTMP2, XTMP2; \
+ vpxor XTMP2, XTMP5, XTMP5; \
+ vpxor XTMP5, XTMP1, w0;
+
+#define SCHED_W_2(round, w0, w1, w2, w3, w4, w5) \
+ /* W1 in XMM12 */ \
+ vpshufd $0b10111111, w4, XTMP4; \
+ vpalignr $12, XTMP4, w5, XTMP4; \
+ vmovdqa XTMP4, XW_W1_ADDR((round), 0); \
+ /* W1 ^ W2 => XTMP1 */ \
+ vpxor w0, XTMP4, XTMP1; \
+ vmovdqa XTMP1, XW_W1W2_ADDR((round), 0);
+
+
+.section .rodata.cst16, "aM", @progbits, 16
+.align 16
+
+.Lbe32mask:
+ .long 0x00010203, 0x04050607, 0x08090a0b, 0x0c0d0e0f
+
+.text
+
+/*
+ * Transform nblocks*64 bytes (nblocks*16 32-bit words) at DATA.
+ *
+ * void sm3_transform_avx(struct sm3_state *state,
+ * const u8 *data, int nblocks);
+ */
+.align 16
+SYM_FUNC_START(sm3_transform_avx)
+ /* input:
+ * %rdi: ctx, CTX
+ * %rsi: data (64*nblks bytes)
+ * %rdx: nblocks
+ */
+ vzeroupper;
+
+ pushq %rbp;
+ movq %rsp, %rbp;
+
+ movq %rdx, RNBLKS;
+
+ subq $STACK_SIZE, %rsp;
+ andq $(~63), %rsp;
+
+ movq %rbx, (STACK_REG_SAVE + 0 * 8)(%rsp);
+ movq %r15, (STACK_REG_SAVE + 1 * 8)(%rsp);
+ movq %r14, (STACK_REG_SAVE + 2 * 8)(%rsp);
+ movq %r13, (STACK_REG_SAVE + 3 * 8)(%rsp);
+ movq %r12, (STACK_REG_SAVE + 4 * 8)(%rsp);
+
+ vmovdqa .Lbe32mask (%rip), BSWAP_REG;
+
+ /* Get the values of the chaining variables. */
+ movl state_h0(RSTATE), a;
+ movl state_h1(RSTATE), b;
+ movl state_h2(RSTATE), c;
+ movl state_h3(RSTATE), d;
+ movl state_h4(RSTATE), e;
+ movl state_h5(RSTATE), f;
+ movl state_h6(RSTATE), g;
+ movl state_h7(RSTATE), h;
+
+.align 16
+.Loop:
+ /* Load data part1. */
+ LOAD_W_XMM_1();
+
+ leaq -1(RNBLKS), RNBLKS;
+
+ /* Transform 0-3 + Load data part2. */
+ R1(a, b, c, d, e, f, g, h, 0, 0, IW); LOAD_W_XMM_2();
+ R1(d, a, b, c, h, e, f, g, 1, 1, IW);
+ R1(c, d, a, b, g, h, e, f, 2, 2, IW);
+ R1(b, c, d, a, f, g, h, e, 3, 3, IW); LOAD_W_XMM_3();
+
+ /* Transform 4-7 + Precalc 12-14. */
+ R1(a, b, c, d, e, f, g, h, 4, 0, IW);
+ R1(d, a, b, c, h, e, f, g, 5, 1, IW);
+ R1(c, d, a, b, g, h, e, f, 6, 2, IW); SCHED_W_0(12, W0, W1, W2, W3, W4, W5);
+ R1(b, c, d, a, f, g, h, e, 7, 3, IW); SCHED_W_1(12, W0, W1, W2, W3, W4, W5);
+
+ /* Transform 8-11 + Precalc 12-17. */
+ R1(a, b, c, d, e, f, g, h, 8, 0, IW); SCHED_W_2(12, W0, W1, W2, W3, W4, W5);
+ R1(d, a, b, c, h, e, f, g, 9, 1, IW); SCHED_W_0(15, W1, W2, W3, W4, W5, W0);
+ R1(c, d, a, b, g, h, e, f, 10, 2, IW); SCHED_W_1(15, W1, W2, W3, W4, W5, W0);
+ R1(b, c, d, a, f, g, h, e, 11, 3, IW); SCHED_W_2(15, W1, W2, W3, W4, W5, W0);
+
+ /* Transform 12-14 + Precalc 18-20 */
+ R1(a, b, c, d, e, f, g, h, 12, 0, XW); SCHED_W_0(18, W2, W3, W4, W5, W0, W1);
+ R1(d, a, b, c, h, e, f, g, 13, 1, XW); SCHED_W_1(18, W2, W3, W4, W5, W0, W1);
+ R1(c, d, a, b, g, h, e, f, 14, 2, XW); SCHED_W_2(18, W2, W3, W4, W5, W0, W1);
+
+ /* Transform 15-17 + Precalc 21-23 */
+ R1(b, c, d, a, f, g, h, e, 15, 0, XW); SCHED_W_0(21, W3, W4, W5, W0, W1, W2);
+ R2(a, b, c, d, e, f, g, h, 16, 1, XW); SCHED_W_1(21, W3, W4, W5, W0, W1, W2);
+ R2(d, a, b, c, h, e, f, g, 17, 2, XW); SCHED_W_2(21, W3, W4, W5, W0, W1, W2);
+
+ /* Transform 18-20 + Precalc 24-26 */
+ R2(c, d, a, b, g, h, e, f, 18, 0, XW); SCHED_W_0(24, W4, W5, W0, W1, W2, W3);
+ R2(b, c, d, a, f, g, h, e, 19, 1, XW); SCHED_W_1(24, W4, W5, W0, W1, W2, W3);
+ R2(a, b, c, d, e, f, g, h, 20, 2, XW); SCHED_W_2(24, W4, W5, W0, W1, W2, W3);
+
+ /* Transform 21-23 + Precalc 27-29 */
+ R2(d, a, b, c, h, e, f, g, 21, 0, XW); SCHED_W_0(27, W5, W0, W1, W2, W3, W4);
+ R2(c, d, a, b, g, h, e, f, 22, 1, XW); SCHED_W_1(27, W5, W0, W1, W2, W3, W4);
+ R2(b, c, d, a, f, g, h, e, 23, 2, XW); SCHED_W_2(27, W5, W0, W1, W2, W3, W4);
+
+ /* Transform 24-26 + Precalc 30-32 */
+ R2(a, b, c, d, e, f, g, h, 24, 0, XW); SCHED_W_0(30, W0, W1, W2, W3, W4, W5);
+ R2(d, a, b, c, h, e, f, g, 25, 1, XW); SCHED_W_1(30, W0, W1, W2, W3, W4, W5);
+ R2(c, d, a, b, g, h, e, f, 26, 2, XW); SCHED_W_2(30, W0, W1, W2, W3, W4, W5);
+
+ /* Transform 27-29 + Precalc 33-35 */
+ R2(b, c, d, a, f, g, h, e, 27, 0, XW); SCHED_W_0(33, W1, W2, W3, W4, W5, W0);
+ R2(a, b, c, d, e, f, g, h, 28, 1, XW); SCHED_W_1(33, W1, W2, W3, W4, W5, W0);
+ R2(d, a, b, c, h, e, f, g, 29, 2, XW); SCHED_W_2(33, W1, W2, W3, W4, W5, W0);
+
+ /* Transform 30-32 + Precalc 36-38 */
+ R2(c, d, a, b, g, h, e, f, 30, 0, XW); SCHED_W_0(36, W2, W3, W4, W5, W0, W1);
+ R2(b, c, d, a, f, g, h, e, 31, 1, XW); SCHED_W_1(36, W2, W3, W4, W5, W0, W1);
+ R2(a, b, c, d, e, f, g, h, 32, 2, XW); SCHED_W_2(36, W2, W3, W4, W5, W0, W1);
+
+ /* Transform 33-35 + Precalc 39-41 */
+ R2(d, a, b, c, h, e, f, g, 33, 0, XW); SCHED_W_0(39, W3, W4, W5, W0, W1, W2);
+ R2(c, d, a, b, g, h, e, f, 34, 1, XW); SCHED_W_1(39, W3, W4, W5, W0, W1, W2);
+ R2(b, c, d, a, f, g, h, e, 35, 2, XW); SCHED_W_2(39, W3, W4, W5, W0, W1, W2);
+
+ /* Transform 36-38 + Precalc 42-44 */
+ R2(a, b, c, d, e, f, g, h, 36, 0, XW); SCHED_W_0(42, W4, W5, W0, W1, W2, W3);
+ R2(d, a, b, c, h, e, f, g, 37, 1, XW); SCHED_W_1(42, W4, W5, W0, W1, W2, W3);
+ R2(c, d, a, b, g, h, e, f, 38, 2, XW); SCHED_W_2(42, W4, W5, W0, W1, W2, W3);
+
+ /* Transform 39-41 + Precalc 45-47 */
+ R2(b, c, d, a, f, g, h, e, 39, 0, XW); SCHED_W_0(45, W5, W0, W1, W2, W3, W4);
+ R2(a, b, c, d, e, f, g, h, 40, 1, XW); SCHED_W_1(45, W5, W0, W1, W2, W3, W4);
+ R2(d, a, b, c, h, e, f, g, 41, 2, XW); SCHED_W_2(45, W5, W0, W1, W2, W3, W4);
+
+ /* Transform 42-44 + Precalc 48-50 */
+ R2(c, d, a, b, g, h, e, f, 42, 0, XW); SCHED_W_0(48, W0, W1, W2, W3, W4, W5);
+ R2(b, c, d, a, f, g, h, e, 43, 1, XW); SCHED_W_1(48, W0, W1, W2, W3, W4, W5);
+ R2(a, b, c, d, e, f, g, h, 44, 2, XW); SCHED_W_2(48, W0, W1, W2, W3, W4, W5);
+
+ /* Transform 45-47 + Precalc 51-53 */
+ R2(d, a, b, c, h, e, f, g, 45, 0, XW); SCHED_W_0(51, W1, W2, W3, W4, W5, W0);
+ R2(c, d, a, b, g, h, e, f, 46, 1, XW); SCHED_W_1(51, W1, W2, W3, W4, W5, W0);
+ R2(b, c, d, a, f, g, h, e, 47, 2, XW); SCHED_W_2(51, W1, W2, W3, W4, W5, W0);
+
+ /* Transform 48-50 + Precalc 54-56 */
+ R2(a, b, c, d, e, f, g, h, 48, 0, XW); SCHED_W_0(54, W2, W3, W4, W5, W0, W1);
+ R2(d, a, b, c, h, e, f, g, 49, 1, XW); SCHED_W_1(54, W2, W3, W4, W5, W0, W1);
+ R2(c, d, a, b, g, h, e, f, 50, 2, XW); SCHED_W_2(54, W2, W3, W4, W5, W0, W1);
+
+ /* Transform 51-53 + Precalc 57-59 */
+ R2(b, c, d, a, f, g, h, e, 51, 0, XW); SCHED_W_0(57, W3, W4, W5, W0, W1, W2);
+ R2(a, b, c, d, e, f, g, h, 52, 1, XW); SCHED_W_1(57, W3, W4, W5, W0, W1, W2);
+ R2(d, a, b, c, h, e, f, g, 53, 2, XW); SCHED_W_2(57, W3, W4, W5, W0, W1, W2);
+
+ /* Transform 54-56 + Precalc 60-62 */
+ R2(c, d, a, b, g, h, e, f, 54, 0, XW); SCHED_W_0(60, W4, W5, W0, W1, W2, W3);
+ R2(b, c, d, a, f, g, h, e, 55, 1, XW); SCHED_W_1(60, W4, W5, W0, W1, W2, W3);
+ R2(a, b, c, d, e, f, g, h, 56, 2, XW); SCHED_W_2(60, W4, W5, W0, W1, W2, W3);
+
+ /* Transform 57-59 + Precalc 63 */
+ R2(d, a, b, c, h, e, f, g, 57, 0, XW); SCHED_W_0(63, W5, W0, W1, W2, W3, W4);
+ R2(c, d, a, b, g, h, e, f, 58, 1, XW);
+ R2(b, c, d, a, f, g, h, e, 59, 2, XW); SCHED_W_1(63, W5, W0, W1, W2, W3, W4);
+
+ /* Transform 60-62 + Precalc 63 */
+ R2(a, b, c, d, e, f, g, h, 60, 0, XW);
+ R2(d, a, b, c, h, e, f, g, 61, 1, XW); SCHED_W_2(63, W5, W0, W1, W2, W3, W4);
+ R2(c, d, a, b, g, h, e, f, 62, 2, XW);
+
+ /* Transform 63 */
+ R2(b, c, d, a, f, g, h, e, 63, 0, XW);
+
+ /* Update the chaining variables. */
+ xorl state_h0(RSTATE), a;
+ xorl state_h1(RSTATE), b;
+ xorl state_h2(RSTATE), c;
+ xorl state_h3(RSTATE), d;
+ movl a, state_h0(RSTATE);
+ movl b, state_h1(RSTATE);
+ movl c, state_h2(RSTATE);
+ movl d, state_h3(RSTATE);
+ xorl state_h4(RSTATE), e;
+ xorl state_h5(RSTATE), f;
+ xorl state_h6(RSTATE), g;
+ xorl state_h7(RSTATE), h;
+ movl e, state_h4(RSTATE);
+ movl f, state_h5(RSTATE);
+ movl g, state_h6(RSTATE);
+ movl h, state_h7(RSTATE);
+
+ cmpq $0, RNBLKS;
+ jne .Loop;
+
+ vzeroall;
+
+ movq (STACK_REG_SAVE + 0 * 8)(%rsp), %rbx;
+ movq (STACK_REG_SAVE + 1 * 8)(%rsp), %r15;
+ movq (STACK_REG_SAVE + 2 * 8)(%rsp), %r14;
+ movq (STACK_REG_SAVE + 3 * 8)(%rsp), %r13;
+ movq (STACK_REG_SAVE + 4 * 8)(%rsp), %r12;
+
+ vmovdqa %xmm0, IW_W1_ADDR(0, 0);
+ vmovdqa %xmm0, IW_W1W2_ADDR(0, 0);
+ vmovdqa %xmm0, IW_W1_ADDR(4, 0);
+ vmovdqa %xmm0, IW_W1W2_ADDR(4, 0);
+ vmovdqa %xmm0, IW_W1_ADDR(8, 0);
+ vmovdqa %xmm0, IW_W1W2_ADDR(8, 0);
+
+ movq %rbp, %rsp;
+ popq %rbp;
+ ret;
+SYM_FUNC_END(sm3_transform_avx)
diff --git a/arch/x86/crypto/sm3_avx_glue.c b/arch/x86/crypto/sm3_avx_glue.c
new file mode 100644
index 000000000000..661b6f22ffcd
--- /dev/null
+++ b/arch/x86/crypto/sm3_avx_glue.c
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM3 Secure Hash Algorithm, AVX assembler accelerated.
+ * specified in: https://datatracker.ietf.org/doc/html/draft-sca-cfrg-sm3-02
+ *
+ * Copyright (C) 2021 Tianjia Zhang <tianjia.zhang at linux.alibaba.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <crypto/sm3.h>
+#include <crypto/sm3_base.h>
+#include <asm/simd.h>
+
+asmlinkage void sm3_transform_avx(struct sm3_state *state,
+ const u8 *data, int nblocks);
+
+static int sm3_avx_update(struct shash_desc *desc, const u8 *data,
+ unsigned int len)
+{
+ struct sm3_state *sctx = shash_desc_ctx(desc);
+
+ if (!crypto_simd_usable() ||
+ (sctx->count % SM3_BLOCK_SIZE) + len < SM3_BLOCK_SIZE) {
+ sm3_update(sctx, data, len);
+ return 0;
+ }
+
+ /*
+ * Make sure struct sm3_state begins directly with the SM3
+ * 256-bit internal state, as this is what the asm functions expect.
+ */
+ BUILD_BUG_ON(offsetof(struct sm3_state, state) != 0);
+
+ kernel_fpu_begin();
+ sm3_base_do_update(desc, data, len, sm3_transform_avx);
+ kernel_fpu_end();
+
+ return 0;
+}
+
+static int sm3_avx_finup(struct shash_desc *desc, const u8 *data,
+ unsigned int len, u8 *out)
+{
+ if (!crypto_simd_usable()) {
+ struct sm3_state *sctx = shash_desc_ctx(desc);
+
+ if (len)
+ sm3_update(sctx, data, len);
+
+ sm3_final(sctx, out);
+ return 0;
+ }
+
+ kernel_fpu_begin();
+ if (len)
+ sm3_base_do_update(desc, data, len, sm3_transform_avx);
+ sm3_base_do_finalize(desc, sm3_transform_avx);
+ kernel_fpu_end();
+
+ return sm3_base_finish(desc, out);
+}
+
+static int sm3_avx_final(struct shash_desc *desc, u8 *out)
+{
+ if (!crypto_simd_usable()) {
+ sm3_final(shash_desc_ctx(desc), out);
+ return 0;
+ }
+
+ kernel_fpu_begin();
+ sm3_base_do_finalize(desc, sm3_transform_avx);
+ kernel_fpu_end();
+
+ return sm3_base_finish(desc, out);
+}
+
+static struct shash_alg sm3_avx_alg = {
+ .digestsize = SM3_DIGEST_SIZE,
+ .init = sm3_base_init,
+ .update = sm3_avx_update,
+ .final = sm3_avx_final,
+ .finup = sm3_avx_finup,
+ .descsize = sizeof(struct sm3_state),
+ .base = {
+ .cra_name = "sm3",
+ .cra_driver_name = "sm3-avx",
+ .cra_priority = 300,
+ .cra_blocksize = SM3_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+static int __init sm3_avx_mod_init(void)
+{
+ const char *feature_name;
+
+ if (!boot_cpu_has(X86_FEATURE_AVX)) {
+ pr_info("AVX instruction are not detected.\n");
+ return -ENODEV;
+ }
+
+ if (!boot_cpu_has(X86_FEATURE_BMI2)) {
+ pr_info("BMI2 instruction are not detected.\n");
+ return -ENODEV;
+ }
+
+ if (!cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM,
+ &feature_name)) {
+ pr_info("CPU feature '%s' is not supported.\n", feature_name);
+ return -ENODEV;
+ }
+
+ return crypto_register_shash(&sm3_avx_alg);
+}
+
+static void __exit sm3_avx_mod_exit(void)
+{
+ crypto_unregister_shash(&sm3_avx_alg);
+}
+
+module_init(sm3_avx_mod_init);
+module_exit(sm3_avx_mod_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang at linux.alibaba.com>");
+MODULE_DESCRIPTION("SM3 Secure Hash Algorithm, AVX assembler accelerated");
+MODULE_ALIAS_CRYPTO("sm3");
+MODULE_ALIAS_CRYPTO("sm3-avx");
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 8e780bf66c0a..0af5216c083a 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -1008,6 +1008,19 @@ config CRYPTO_SM3
http://www.oscca.gov.cn/UpFile/20101222141857786.pdf
https://datatracker.ietf.org/doc/html/draft-shen-sm3-hash
+config CRYPTO_SM3_AVX_X86_64
+ tristate "SM3 digest algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_HASH
+ select CRYPTO_LIB_SM3
+ help
+ SM3 secure hash function as defined by OSCCA GM/T 0004-2012 SM3).
+ It is part of the Chinese Commercial Cryptography suite. This is
+ SM3 optimized implementation using Advanced Vector Extensions (AVX)
+ when available.
+
+ If unsure, say N.
+
config CRYPTO_STREEBOG
tristate "Streebog Hash Function"
select CRYPTO_HASH
--
2.32.0
More information about the linux-arm-kernel
mailing list