[PATCH 3/5] drm/exynos/exynos_drm_fimd: Use platform_get_irq_byname() to get the interrupt

[Lad Prabhakar]

platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
 drivers/gpu/drm/exynos/exynos_drm_fimd.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index c735e53939d8..7d5a483a54de 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -1133,7 +1133,6 @@ static int fimd_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct fimd_context *ctx;
 	struct device_node *i80_if_timings;
-	struct resource *res;
 	int ret;
 
 	if (!dev->of_node)
@@ -1206,15 +1205,11 @@ static int fimd_probe(struct platform_device *pdev)
 	if (IS_ERR(ctx->regs))
 		return PTR_ERR(ctx->regs);
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-					   ctx->i80_if ? "lcd_sys" : "vsync");
-	if (!res) {
-		dev_err(dev, "irq request failed.\n");
-		return -ENXIO;
-	}
+	ret = platform_get_irq_byname(pdev, ctx->i80_if ? "lcd_sys" : "vsync");
+	if (ret < 0)
+		return ret;
 
-	ret = devm_request_irq(dev, res->start, fimd_irq_handler,
-							0, "drm_fimd", ctx);
+	ret = devm_request_irq(dev, ret, fimd_irq_handler, 0, "drm_fimd", ctx);
 	if (ret) {
 		dev_err(dev, "irq request failed.\n");
 		return ret;
-- 
2.17.1