[boot-wrapper PATCH v2 9/9] avoid dtc warnings on re-compiling DTB

[Andre Przywara]

When we add the PSCI nodes to the provided DTB, we use dtc to de-compile
the blob first, then re-compile it with our nodes and properties added.

In our input DTB the proper phandle references have already been lost,
all we see in the DTB is phandle properties in the target node, and some
numbers in the clocks and gpios properties:
===========
	clk24mhz {
		compatible = "fixed-clock";
		#clock-cells = <0x00>;
		clock-frequency = <0x16e3600>;
		clock-output-names = "v2m:clk24mhz";
->		phandle = <0x05>;
	};
	...
	serial at 90000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0x90000 0x1000>;
		interrupts = <0x05>;
->		clocks = <0x05 0x05>;
		clock-names = "uartclk", "apb_pclk";
	};
===========
dtc warns that those numbers might be wrong:
=========
<stdin>:177.6-27: Warning (clocks_property):
 /bus at 8000000/motherboard-bus at 8000000/iofpga-bus at 300000000/serial at 90000:
   clocks: cell 0 is not a phandle reference
....
=========
The proper solution would be to use references (&v2m_clk24mhz) instead,
as there are in the source .dts file, but we don't have that information
anymore, and cannot easily recover it.

To avoid the lengthy list of warnings, just drop those checks from the
dtc compilation run. This disables more checks than we want or need, but
we somewhat trust in the original DTB to be sane, so that should be
fine.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 Makefile.am | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile.am b/Makefile.am
index 3d8128f..430b4a9 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -160,7 +160,7 @@ model.lds: $(LD_SCRIPT) Makefile
 	$(CPP) $(CPPFLAGS) -ansi -DPHYS_OFFSET=$(PHYS_OFFSET) -DMBOX_OFFSET=$(MBOX_OFFSET) -DKERNEL_OFFSET=$(KERNEL_OFFSET) -DFDT_OFFSET=$(FDT_OFFSET) -DFS_OFFSET=$(FS_OFFSET) $(XEN) -DXEN_OFFSET=$(XEN_OFFSET) -DKERNEL=$(KERNEL_IMAGE) -DFILESYSTEM=$(FILESYSTEM) -DTEXT_LIMIT=$(TEXT_LIMIT) -P -C -o $@ $<
 
 fdt.dtb: $(KERNEL_DTB) Makefile
-	( $(DTC) -O dts -I dtb $(KERNEL_DTB) ; echo "/ { $(CHOSEN_NODE) $(PSCI_NODE) }; $(CPU_NODES)" ) | $(DTC) -O dtb -o $@ -
+	( $(DTC) -O dts -I dtb $(KERNEL_DTB) ; echo "/ { $(CHOSEN_NODE) $(PSCI_NODE) }; $(CPU_NODES)" ) | $(DTC) -O dtb -o $@ -Wno-clocks_property -Wno-gpios_property -
 
 # The filesystem archive might not exist if INITRD is not being used
 .PHONY: all clean $(FILESYSTEM)
-- 
2.25.1