[PATCH 22/22] drm: rockchip: Add VOP2 driver

Nicolas Frattaroli frattaroli.nicolas at gmail.com
Mon Dec 20 08:53:14 PST 2021


On Montag, 20. Dezember 2021 15:16:55 CET Nicolas Frattaroli wrote:
> On Montag, 20. Dezember 2021 12:06:30 CET Sascha Hauer wrote:
> > From: Andy Yan <andy.yan at rock-chips.com>
> > 
> > The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
> > It replaces the VOP unit found in the older Rockchip SoCs.
> > 
> > This driver has been derived from the downstream Rockchip Kernel and
> > heavily modified:
> > 
> > - All nonstandard DRM properties have been removed
> > - dropped struct vop2_plane_state and pass around less data between
> >   functions
> > - Dropped all DRM_FORMAT_* not known on upstream
> > - rework register access to get rid of excessively used macros
> > - Drop all waiting for framesyncs
> > 
> > The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
> > board. Overlay support is tested with the modetest utility. AFBC support
> > on the cluster windows is tested with weston-simple-dmabuf-egl on
> > weston using the (yet to be upstreamed) panfrost driver support.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > ---
> 
> Hi Sascha,
> 
> sadly I'm getting
> 
> [    1.668856] rockchip-drm display-subsystem: [drm] *ERROR* failed to get vop2 register byname
> [    1.669621] rockchip-drm display-subsystem: failed to bind fe040000.vop (ops vop2_component_ops): -22
> [    1.670584] rockchip-drm display-subsystem: master bind failed: -22
> [    1.671164] dwhdmi-rockchip: probe of fe0a0000.hdmi failed with error -22
> 
> on a Quartz64 Model A.
> 
> 
> > +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> > +	if (!res) {
> > +		drm_err(vop2->drm, "failed to get vop2 register byname\n");
> > +		return -EINVAL;
> > +	}
> 
> This seems to be the code that triggers it.
> 
> Any ideas as to what could be causing this?
> 
> Regards,
> Nicolas Frattaroli
> 

A small follow-up:

We're trying to get IORESOURCE_MEM by the name "regs", but nothing
has a reg-names property in the device tree changes you sent in.

How did you test this on your system?

Also, adding the reg-names = "regs"; to the vop node doesn't make
it probe, it just fails with

[    1.668560] rockchip-vop2 fe040000.vop: can't request region for resource [mem 0xfe040000-0xfe044fff]

then.

We're also trying to get gamma_lut the same way, but your cover letter states

> drop unnecessary gamma_lut registers from vop2

which makes me wonder: is this the correct series of patches you sent in?

Regards,
Nicolas Frattaroli





More information about the linux-arm-kernel mailing list