[PATCH] ARM: dts: Remove "spidev" nodes
Rob Herring
robh at kernel.org
Fri Dec 17 14:12:32 PST 2021
"spidev" is not a real device, but a Linux implementation detail. It has
never been documented either. The kernel has WARNed on the use of it for
over 6 years. Time to remove its usage from the tree.
Cc: Mark Brown <broonie at kernel.org>
Signed-off-by: Rob Herring <robh at kernel.org>
---
Arnd, Olof, Can you please apply this directly.
arch/arm/boot/dts/at91-q5xr5.dts | 18 ----------
arch/arm/boot/dts/at91-wb50n.dts | 6 ----
arch/arm/boot/dts/imx28-tx28.dts | 36 -------------------
arch/arm/boot/dts/imx53-tx53.dtsi | 11 ------
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 12 -------
.../boot/dts/imx6ul-imx6ull-opos6uldev.dtsi | 12 -------
arch/arm/boot/dts/imx6ul-prti6g.dts | 6 ----
arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 24 -------------
arch/arm/boot/dts/omap3-tao3530.dtsi | 14 --------
.../dts/qcom-mdm9615-wp8548-mangoh-green.dts | 2 +-
arch/arm/boot/dts/spear1310-evb.dts | 16 ---------
arch/arm/boot/dts/spear1340-evb.dts | 16 ---------
12 files changed, 1 insertion(+), 172 deletions(-)
diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts
index 5827383b181b..47a00062f01f 100644
--- a/arch/arm/boot/dts/at91-q5xr5.dts
+++ b/arch/arm/boot/dts/at91-q5xr5.dts
@@ -147,12 +147,6 @@ uboot at 8000 {
reg = <0x8000 0x3E000>;
};
};
-
- spidev at 1 {
- compatible = "spidev";
- spi-max-frequency = <2000000>;
- reg = <1>;
- };
};
&spi1 {
@@ -160,18 +154,6 @@ &spi1 {
pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
status = "okay";
-
- spidev at 0 {
- compatible = "spidev";
- spi-max-frequency = <2000000>;
- reg = <0>;
- };
-
- spidev at 1 {
- compatible = "spidev";
- spi-max-frequency = <2000000>;
- reg = <1>;
- };
};
&usart0 {
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index a5e45bb95c04..89f0f717f7ed 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -90,12 +90,6 @@ &i2c0 {
&spi1 {
status = "okay";
-
- spidev at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <8000000>;
- };
};
&usb0 {
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 164254c28f8e..9e5651c7ea6b 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -239,24 +239,6 @@ &gpio3 9 GPIO_ACTIVE_LOW
>;
/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
status = "disabled";
-
- spi at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <57600000>;
- };
-
- spi at 1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <57600000>;
- };
-
- spi at 2 {
- compatible = "spidev";
- reg = <2>;
- spi-max-frequency = <57600000>;
- };
};
};
@@ -700,24 +682,6 @@ &ssp3 {
pinctrl-0 = <&spi3_pins_a>;
clock-frequency = <57600000>;
status = "okay";
-
- spi at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <57600000>;
- };
-
- spi at 1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <57600000>;
- };
-
- spi at 2 {
- compatible = "spidev";
- reg = <2>;
- spi-max-frequency = <57600000>;
- };
};
&usb0 {
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 7c9730f3f820..81c2726a328a 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -192,17 +192,6 @@ &gpio2 30 GPIO_ACTIVE_HIGH
&gpio3 19 GPIO_ACTIVE_HIGH
>;
- spidev0: spi at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <54000000>;
- };
-
- spidev1: spi at 1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <54000000>;
- };
};
&esdhc1 {
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index 362e65ccaa78..bcc5bbcce769 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -259,18 +259,6 @@ &gpio2 30 GPIO_ACTIVE_HIGH
&gpio3 19 GPIO_ACTIVE_HIGH
>;
status = "disabled";
-
- spidev0: spi at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <54000000>;
- };
-
- spidev1: spi at 1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <54000000>;
- };
};
&fec {
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
index 935a77d717a6..18cac19aa9b0 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
@@ -114,18 +114,6 @@ &ecspi4 {
pinctrl-0 = <&pinctrl_ecspi4>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
status = "okay";
-
- spidev0: spi at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <5000000>;
- };
-
- spidev1: spi at 1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <5000000>;
- };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
index d62015701d0a..c18390f238e1 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/imx6ul-prti6g.dts
@@ -78,12 +78,6 @@ &ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
-
- spi at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <1000000>;
- };
};
&fec1 {
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index 938a32ced88d..c485d058e079 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -227,18 +227,6 @@ &gpio1 29 GPIO_ACTIVE_HIGH
&gpio1 10 GPIO_ACTIVE_HIGH
>;
status = "disabled";
-
- spi at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <660000>;
- };
-
- spi at 1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <660000>;
- };
};
sound {
@@ -290,18 +278,6 @@ &gpio1 29 GPIO_ACTIVE_HIGH
&gpio1 10 GPIO_ACTIVE_HIGH
>;
status = "disabled";
-
- spidev0: spi at 0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <60000000>;
- };
-
- spidev1: spi at 1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <60000000>;
- };
};
&fec1 {
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 580bfa1931c8..7f440d11f7e7 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -197,25 +197,11 @@ &i2c3 {
&mcspi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
-
- spidev at 0 {
- compatible = "spidev";
- spi-max-frequency = <48000000>;
- reg = <0>;
- spi-cpha;
- };
};
&mcspi3 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi3_pins>;
-
- spidev at 0 {
- compatible = "spidev";
- spi-max-frequency = <48000000>;
- reg = <0>;
- spi-cpha;
- };
};
#include "twl4030.dtsi"
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 942e3a2cac35..0827de5426c1 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -103,7 +103,7 @@ pins {
&gsbi3_spi {
spi at 0 {
- compatible = "swir,mangoh-iotport-spi", "spidev";
+ compatible = "swir,mangoh-iotport-spi";
spi-max-frequency = <24000000>;
reg = <0>;
};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 8fcb6be6e7c7..4cbadcb41084 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -395,22 +395,6 @@ m25p80 at 1 {
pl022,wait-state = <0>;
pl022,duplex = <0>;
};
-
- spidev at 2 {
- compatible = "spidev";
- reg = <2>;
- spi-max-frequency = <25000000>;
- spi-cpha;
- pl022,hierarchy = <0>;
- pl022,interface = <0>;
- pl022,slave-tx-disable;
- pl022,com-mode = <0x2>;
- pl022,rx-level-trig = <0>;
- pl022,tx-level-trig = <0>;
- pl022,ctrl-len = <0x11>;
- pl022,wait-state = <0>;
- pl022,duplex = <0>;
- };
};
wdt at ec800620 {
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index f70ff56d4542..fd194ebeedc9 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -489,22 +489,6 @@ stmpe_touchscreen {
ts,i-drive = <1>;
};
};
-
- spidev at 2 {
- compatible = "spidev";
- reg = <2>;
- spi-max-frequency = <25000000>;
- spi-cpha;
- pl022,hierarchy = <0>;
- pl022,interface = <0>;
- pl022,slave-tx-disable;
- pl022,com-mode = <0x2>;
- pl022,rx-level-trig = <0>;
- pl022,tx-level-trig = <0>;
- pl022,ctrl-len = <0x11>;
- pl022,wait-state = <0>;
- pl022,duplex = <0>;
- };
};
timer at ec800600 {
--
2.32.0
More information about the linux-arm-kernel
mailing list