[PATCH 1/1] arm64: dts: tqma8mqml: add PCIe support
Alexander Stein
alexander.stein at ew.tq-group.com
Fri Dec 17 02:22:07 PST 2021
Add PCIe support to TQMa8MxML series.
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
This goes on top of the series recently applied to pci/dwc [1]:
[PATCH v7 0/8] Add the imx8m pcie phy driver and imx8mm pcie support
[1] https://patchwork.kernel.org/project/linux-pci/list/?series=589031&state=*
.../dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 19 +++++++++++++++++++
.../boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 5 +++++
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 ++++++
3 files changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 7844878788f4..286d2df01cfa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mm-tqma8mqml.dtsi"
#include "mba8mx.dtsi"
@@ -58,6 +59,24 @@ expander2: gpio at 27 {
};
};
+&pcie_phy {
+ clocks = <&pcie0_refclk>;
+ status = "okay";
+};
+
+&pcie0 {
+ reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+};
+
&sai3 {
assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 284e62acc0b4..16ee9b5179e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -227,6 +227,11 @@ eeprom0: eeprom at 57 {
};
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index e694dacb16af..42e12c190e9e 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -87,6 +87,12 @@ panel_in_lvds0: endpoint {
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
reg_12v: regulator-12v {
compatible = "regulator-fixed";
regulator-name = "MBA8MX_12V";
--
2.25.1
More information about the linux-arm-kernel
mailing list