[PATCH v5] arm64: kprobe: Enable OPTPROBE for arm64
liuqi (BA)
liuqi115 at huawei.com
Thu Dec 16 03:18:30 PST 2021
On 2021/12/14 23:55, Jianhua Liu wrote:
> On Tue, Dec 14, 2021 at 8:27 AM Masami Hiramatsu <mhiramat at kernel.org> wrote:
>>
>> On Mon, 13 Dec 2021 18:38:52 +0000
>> Will Deacon <will at kernel.org> wrote:
>>
>>> Hi,
>>>
>>> [+Janet Liu]
>>>
>>> On Tue, Dec 07, 2021 at 08:40:02PM +0800, Qi Liu wrote:
>>>> This patch introduce optprobe for ARM64. In optprobe, probed
>>>> instruction is replaced by a branch instruction to trampoline.
>>>>
>>>> Performance of optprobe on Hip08 platform is test using kprobe
>>>> example module[1] to analyze the latency of a kernel function,
>>>> and here is the result:
>>>>
>>>> common kprobe:
>>>> [280709.846380] do_empty returned 0 and took 1530 ns to execute
>>>> [280709.852057] do_empty returned 0 and took 550 ns to execute
>>>> [280709.857631] do_empty returned 0 and took 440 ns to execute
>>>> [280709.863215] do_empty returned 0 and took 380 ns to execute
>>>> [280709.868787] do_empty returned 0 and took 360 ns to execute
>>>> [280709.874362] do_empty returned 0 and took 340 ns to execute
>>>> [280709.879936] do_empty returned 0 and took 320 ns to execute
>>>> [280709.885505] do_empty returned 0 and took 300 ns to execute
>>>> [280709.891075] do_empty returned 0 and took 280 ns to execute
>>>> [280709.896646] do_empty returned 0 and took 290 ns to execute
>>>>
>>>> optprobe:
>>>> [ 2965.964572] do_empty returned 0 and took 90 ns to execute
>>>> [ 2965.969952] do_empty returned 0 and took 80 ns to execute
>>>> [ 2965.975332] do_empty returned 0 and took 70 ns to execute
>>>> [ 2965.980714] do_empty returned 0 and took 60 ns to execute
>>>> [ 2965.986128] do_empty returned 0 and took 80 ns to execute
>>>> [ 2965.991507] do_empty returned 0 and took 70 ns to execute
>>>> [ 2965.996884] do_empty returned 0 and took 70 ns to execute
>>>> [ 2966.002262] do_empty returned 0 and took 80 ns to execute
>>>> [ 2966.007642] do_empty returned 0 and took 70 ns to execute
>>>> [ 2966.013020] do_empty returned 0 and took 70 ns to execute
>>>> [ 2966.018400] do_empty returned 0 and took 70 ns to execute
>>>>
>>>> As the result shows, optprobe can greatly reduce the latency. Big
>>>> latency of common kprobe will significantly impact the real result
>>>> while doing performance analysis or debugging performance issues
>>>> in lab, so optprobe is useful in this scenario.
>>>>
>>>> Acked-by: Masami Hiramatsu <mhiramat at kernel.org>
>>>> Signed-off-by: Qi Liu <liuqi115 at huawei.com>
>>>>
>>>> Note:
>>>> As branch instruction in Arm64 has a 128M range limitation, optprobe
>>>> could only used when offset between probe point and trampoline
>>>> is less than 128M, otherwise kernel will choose common kprobe
>>>> automaticly.
>>>>
>>>> Limitation caused by branch isn't unique to Arm64, but also to
>>>> x86/arm/powerpc.
>>>>
>>>> In fact, Module PLT has been tried to get rid of limiation, but
>>>> destination of PLT must be a fixed value, and we need to modify
>>>> the destination (as each optprobe has its own trampoline).
>>>>
>>>> As discussed with Masami[2], we can start with core-kernel point
>>>> (within 128M) as the first step, like other architectures.
>>>>
>>>> [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/samples/kprobes/kretprobe_example.c
>>>> [2] https://lore.kernel.org/lkml/20211201105001.5164f98ba783e7207df1229c@kernel.org/
>>>> ---
>>>> arch/arm64/Kconfig | 1 +
>>>> arch/arm64/include/asm/kprobes.h | 21 ++
>>>> arch/arm64/kernel/probes/Makefile | 2 +
>>>> arch/arm64/kernel/probes/opt_arm64.c | 199 ++++++++++++++++++
>>>> .../arm64/kernel/probes/optprobe_trampoline.S | 97 +++++++++
>>>> include/linux/kprobes.h | 2 +
>>>> kernel/kprobes.c | 22 ++
>>>> 7 files changed, 344 insertions(+)
>>>> create mode 100644 arch/arm64/kernel/probes/opt_arm64.c
>>>> create mode 100644 arch/arm64/kernel/probes/optprobe_trampoline.S
>>>
>>> I've not looked at these changes in detail, but it looks like there is an
>>> independent patch from Janet Liu trying to do the same thing:
>>>
>>> https://lore.kernel.org/r/1635858706-27320-1-git-send-email-jianhua.ljh@gmail.com
>>>
>>
>> Thanks for noticing. I missed it.
>>
>>> The patch here from Qi Liu looks like it's a bit further along, but it
>>> would be good for Janet to at least test it out and confirm that it works
>>> for them.
>>
>> Yeah, it's now v5.
>> But it seems Janet's one also has good points. I would like Janet's sharing
>> save_all_base_regs macro and the comment about the branch instruction.
>>
>>>
>>> Cheers,
>>>
>>> Will
>>>
>>> [Kept diff inline for Janet]
>>
>> Janet, please feel free to review and test it. It is important that you confirm
>> this can work with your envionment too.
>> I will review your KPROBE_ON_FTRACE patch.
>>
> I have tested these patch on UNISOC s9863a platform before sending.
>
> The test case from:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/samples/kprobes/
>
> And I do the following change for kprobe_example.c before testing:
> 1. delete function handler_post,
> kprobe_init does "kp.post_handler = handler_post; --->
> p.post_handler = NULL;"
> 2. handler_pre calls dump_stack.
>
Hi Jianhua,
Could you kindly review this patch and test it on your UNISOC s9863a
platform? Let's work together to make arm64 optprobe work : )
Thanks,
Qi
> Thanks for the review.
>
>> Thank you,
>>
>>>
>>>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>>>> index c4207cf9bb17..6b68ec498e67 100644
>>>> --- a/arch/arm64/Kconfig
>>>> +++ b/arch/arm64/Kconfig
>>>> @@ -200,6 +200,7 @@ config ARM64
>>>> select HAVE_STACKPROTECTOR
>>>> select HAVE_SYSCALL_TRACEPOINTS
>>>> select HAVE_KPROBES
>>>> + select HAVE_OPTPROBES
>>>> select HAVE_KRETPROBES
>>>> select HAVE_GENERIC_VDSO
>>>> select IOMMU_DMA if IOMMU_SUPPORT
>>>> diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h
>>>> index 05cd82eeca13..3838e4317877 100644
>>>> --- a/arch/arm64/include/asm/kprobes.h
>>>> +++ b/arch/arm64/include/asm/kprobes.h
>>>> @@ -39,6 +39,27 @@ void arch_remove_kprobe(struct kprobe *);
>>>> int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
>>>> int kprobe_exceptions_notify(struct notifier_block *self,
>>>> unsigned long val, void *data);
>>>> +
>>>> +struct arch_optimized_insn {
>>>> + kprobe_opcode_t orig_insn[1];
>>>> + kprobe_opcode_t *trampoline;
>>>> +};
>>>> +
>>>> +#define MAX_OPTIMIZED_LENGTH sizeof(kprobe_opcode_t)
>>>> +#define MAX_OPTINSN_SIZE \
>>>> + ((unsigned long)optprobe_template_restore_end - (unsigned long)optprobe_template_entry)
>>>> +
>>>> +extern __visible kprobe_opcode_t optprobe_template_entry[];
>>>> +extern __visible kprobe_opcode_t optprobe_template_val[];
>>>> +extern __visible kprobe_opcode_t optprobe_template_common[];
>>>> +extern __visible kprobe_opcode_t optprobe_template_end[];
>>>> +extern __visible kprobe_opcode_t optprobe_template_restore_begin[];
>>>> +extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn[];
>>>> +extern __visible kprobe_opcode_t optprobe_template_restore_end[];
>>>> +extern __visible kprobe_opcode_t optinsn_slot[];
>>>> +
>>>> +void optprobe_common(void);
>>>> +
>>>> void __kretprobe_trampoline(void);
>>>> void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
>>>>
>>>> diff --git a/arch/arm64/kernel/probes/Makefile b/arch/arm64/kernel/probes/Makefile
>>>> index 8e4be92e25b1..07105fd3261d 100644
>>>> --- a/arch/arm64/kernel/probes/Makefile
>>>> +++ b/arch/arm64/kernel/probes/Makefile
>>>> @@ -4,3 +4,5 @@ obj-$(CONFIG_KPROBES) += kprobes.o decode-insn.o \
>>>> simulate-insn.o
>>>> obj-$(CONFIG_UPROBES) += uprobes.o decode-insn.o \
>>>> simulate-insn.o
>>>> +obj-$(CONFIG_OPTPROBES) += opt_arm64.o \
>>>> + optprobe_trampoline.o
>>>> diff --git a/arch/arm64/kernel/probes/opt_arm64.c b/arch/arm64/kernel/probes/opt_arm64.c
>>>> new file mode 100644
>>>> index 000000000000..1bad5cddcdf2
>>>> --- /dev/null
>>>> +++ b/arch/arm64/kernel/probes/opt_arm64.c
>>>> @@ -0,0 +1,199 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>> +/*
>>>> + * Code for Kernel probes Jump optimization.
>>>> + *
>>>> + * Copyright (C) 2021 Hisilicon Limited
>>>> + */
>>>> +
>>>> +#include <linux/jump_label.h>
>>>> +#include <linux/kprobes.h>
>>>> +
>>>> +#include <asm/cacheflush.h>
>>>> +#include <asm/compiler.h>
>>>> +#include <asm/insn.h>
>>>> +#include <asm/kprobes.h>
>>>> +#include <asm/patching.h>
>>>> +
>>>> +#define OPTPROBE_BATCH_SIZE 64
>>>> +#define GET_LO_VAL(val) FIELD_GET(GENMASK(31, 0), val)
>>>> +#define GET_HI_VAL(val) FIELD_GET(GENMASK(63, 32), val)
>>>> +
>>>> +#define TMPL_VAL_IDX \
>>>> + (optprobe_template_val - optprobe_template_entry)
>>>> +#define TMPL_CALL_COMMON \
>>>> + (optprobe_template_common - optprobe_template_entry)
>>>> +#define TMPL_RESTORE_ORIGN_INSN \
>>>> + (optprobe_template_restore_orig_insn - optprobe_template_entry)
>>>> +#define TMPL_RESTORE_END \
>>>> + (optprobe_template_restore_end - optprobe_template_entry)
>>>> +#define TMPL_END_IDX \
>>>> + (optprobe_template_end - optprobe_template_entry)
>>>> +
>>>> +static bool insn_page_in_use;
>>>> +
>>>> +void *alloc_optinsn_page(void)
>>>> +{
>>>> + if (insn_page_in_use)
>>>> + return NULL;
>>>> + insn_page_in_use = true;
>>>> + return &optinsn_slot;
>>>> +}
>>>> +
>>>> +void free_optinsn_page(void *page)
>>>> +{
>>>> + insn_page_in_use = false;
>>>> +}
>>>> +
>>>> +int arch_check_optimized_kprobe(struct optimized_kprobe *op)
>>>> +{
>>>> + return 0;
>>>> +}
>>>> +
>>>> +int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
>>>> +{
>>>> + return optinsn->trampoline != NULL;
>>>> +}
>>>> +
>>>> +int arch_within_optimized_kprobe(struct optimized_kprobe *op, kprobe_opcode_t *addr)
>>>> +{
>>>> + return op->kp.addr == addr;
>>>> +}
>>>> +
>>>> +static void optprobe_set_pc_value(struct optimized_kprobe *op, struct pt_regs *regs)
>>>> +{
>>>> + regs->pc = (unsigned long)op->kp.addr;
>>>> +}
>>>> +
>>>> +static int optprobe_check_branch_limit(unsigned long pc, unsigned long addr)
>>>> +{
>>>> + long offset;
>>>> +
>>>> + if ((pc & 0x3) || (addr & 0x3))
>>>> + return -ERANGE;
>>>> +
>>>> + offset = (long)addr - (long)pc;
>>>> + if (offset < -SZ_128M || offset >= SZ_128M)
>>>> + return -ERANGE;
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig)
>>>> +{
>>>> + kprobe_opcode_t *code, *buf;
>>>> + u32 insn;
>>>> + int ret = -ENOMEM;
>>>> + int i;
>>>> +
>>>> + buf = kcalloc(MAX_OPTINSN_SIZE, sizeof(kprobe_opcode_t), GFP_KERNEL);
>>>> + if (!buf)
>>>> + return ret;
>>>> +
>>>> + code = get_optinsn_slot();
>>>> + if (!code)
>>>> + goto out;
>>>> +
>>>> + if (optprobe_check_branch_limit((unsigned long)code, (unsigned long)orig->addr + 8)) {
>>>> + ret = -ERANGE;
>>>> + goto error;
>>>> + }
>>>> +
>>>> + op->set_pc = optprobe_set_pc_value;
>>>> + memcpy(buf, optprobe_template_entry, MAX_OPTINSN_SIZE * sizeof(kprobe_opcode_t));
>>>> +
>>>> + insn = aarch64_insn_gen_branch_imm((unsigned long)&code[TMPL_CALL_COMMON],
>>>> + (unsigned long)&optprobe_common,
>>>> + AARCH64_INSN_BRANCH_LINK);
>>>> + buf[TMPL_CALL_COMMON] = insn;
>>>> +
>>>> + insn = aarch64_insn_gen_branch_imm((unsigned long)&code[TMPL_RESTORE_END],
>>>> + (unsigned long)op->kp.addr + 4,
>>>> + AARCH64_INSN_BRANCH_NOLINK);
>>>> + buf[TMPL_RESTORE_END] = insn;
>>>> +
>>>> + buf[TMPL_VAL_IDX] = cpu_to_le32(GET_LO_VAL((unsigned long)op));
>>>> + buf[TMPL_VAL_IDX + 1] = cpu_to_le32(GET_HI_VAL((unsigned long)op));
>>>> + buf[TMPL_RESTORE_ORIGN_INSN] = orig->opcode;
>>>> +
>>>> + /* Setup template */
>>>> + for (i = 0; i < MAX_OPTINSN_SIZE; i++)
>>>> + aarch64_insn_patch_text_nosync(code + i, buf[i]);
>>>> +
>>>> + flush_icache_range((unsigned long)code, (unsigned long)(&code[TMPL_VAL_IDX]));
>>>> + /* Set op->optinsn.trampoline means prepared. */
>>>> + op->optinsn.trampoline = code;
>>>> +
>>>> +out:
>>>> + kfree(buf);
>>>> + return ret;
>>>> +
>>>> +error:
>>>> + free_optinsn_slot(code, 0);
>>>> + goto out;
>>>> +}
>>>> +
>>>> +void arch_optimize_kprobes(struct list_head *oplist)
>>>> +{
>>>> + struct optimized_kprobe *op, *tmp;
>>>> + kprobe_opcode_t insns[OPTPROBE_BATCH_SIZE];
>>>> + void *addrs[OPTPROBE_BATCH_SIZE];
>>>> + int i = 0;
>>>> +
>>>> + list_for_each_entry_safe(op, tmp, oplist, list) {
>>>> + WARN_ON(kprobe_disabled(&op->kp));
>>>> +
>>>> + /*
>>>> + * Backup instructions which will be replaced
>>>> + * by jump address
>>>> + */
>>>> + memcpy(op->optinsn.orig_insn, op->kp.addr, AARCH64_INSN_SIZE);
>>>> +
>>>> + addrs[i] = (void *)op->kp.addr;
>>>> + insns[i] = aarch64_insn_gen_branch_imm((unsigned long)op->kp.addr,
>>>> + (unsigned long)op->optinsn.trampoline,
>>>> + AARCH64_INSN_BRANCH_NOLINK);
>>>> +
>>>> + list_del_init(&op->list);
>>>> + if (++i == OPTPROBE_BATCH_SIZE)
>>>> + break;
>>>> + }
>>>> +
>>>> + aarch64_insn_patch_text(addrs, insns, i);
>>>> +}
>>>> +
>>>> +void arch_unoptimize_kprobe(struct optimized_kprobe *op)
>>>> +{
>>>> + arch_arm_kprobe(&op->kp);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Recover original instructions and breakpoints from relative jumps.
>>>> + * Caller must call with locking kprobe_mutex.
>>>> + */
>>>> +void arch_unoptimize_kprobes(struct list_head *oplist,
>>>> + struct list_head *done_list)
>>>> +{
>>>> + struct optimized_kprobe *op, *tmp;
>>>> + kprobe_opcode_t insns[OPTPROBE_BATCH_SIZE];
>>>> + void *addrs[OPTPROBE_BATCH_SIZE];
>>>> + int i = 0;
>>>> +
>>>> + list_for_each_entry_safe(op, tmp, oplist, list) {
>>>> + addrs[i] = (void *)op->kp.addr;
>>>> + insns[i] = BRK64_OPCODE_KPROBES;
>>>> + list_move(&op->list, done_list);
>>>> +
>>>> + if (++i == OPTPROBE_BATCH_SIZE)
>>>> + break;
>>>> + }
>>>> +
>>>> + aarch64_insn_patch_text(addrs, insns, i);
>>>> +}
>>>> +
>>>> +void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
>>>> +{
>>>> + if (op->optinsn.trampoline) {
>>>> + free_optinsn_slot(op->optinsn.trampoline, 1);
>>>> + op->optinsn.trampoline = NULL;
>>>> + }
>>>> +}
>>>> diff --git a/arch/arm64/kernel/probes/optprobe_trampoline.S b/arch/arm64/kernel/probes/optprobe_trampoline.S
>>>> new file mode 100644
>>>> index 000000000000..1376daeae844
>>>> --- /dev/null
>>>> +++ b/arch/arm64/kernel/probes/optprobe_trampoline.S
>>>> @@ -0,0 +1,97 @@
>>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>>> +/*
>>>> + * trampoline entry and return code for optprobes.
>>>> + */
>>>> +
>>>> +#include <linux/linkage.h>
>>>> +#include <asm/asm-offsets.h>
>>>> +#include <asm/assembler.h>
>>>> +
>>>> +#define OPT_SLOT_SIZE 65536
>>>> +
>>>> + .global optinsn_slot
>>>> +optinsn_slot:
>>>> + .space OPT_SLOT_SIZE
>>>> +
>>>> +SYM_CODE_START(optprobe_common)
>>>> + stp x2, x3, [sp, #S_X2]
>>>> + stp x4, x5, [sp, #S_X4]
>>>> + stp x6, x7, [sp, #S_X6]
>>>> + stp x8, x9, [sp, #S_X8]
>>>> + stp x10, x11, [sp, #S_X10]
>>>> + stp x12, x13, [sp, #S_X12]
>>>> + stp x14, x15, [sp, #S_X14]
>>>> + stp x16, x17, [sp, #S_X16]
>>>> + stp x18, x19, [sp, #S_X18]
>>>> + stp x20, x21, [sp, #S_X20]
>>>> + stp x22, x23, [sp, #S_X22]
>>>> + stp x24, x25, [sp, #S_X24]
>>>> + stp x26, x27, [sp, #S_X26]
>>>> + stp x28, x29, [sp, #S_X28]
>>>> + add x2, sp, #PT_REGS_SIZE
>>>> + str x2, [sp, #S_SP]
>>>> + /* Construct a useful saved PSTATE */
>>>> + mrs x2, nzcv
>>>> + mrs x3, daif
>>>> + orr x2, x2, x3
>>>> + mrs x3, CurrentEL
>>>> + orr x2, x2, x3
>>>> + mrs x3, SPSel
>>>> + orr x2, x2, x3
>>>> + stp xzr, x2, [sp, #S_PC]
>>>> +
>>>> + /* set the pt_regs address to x1 */
>>>> + mov x1, sp
>>>> + /* store lr of optprobe_common temporary */
>>>> + sub sp, sp, #0x10
>>>> + str lr, [sp, #0x8]
>>>> +
>>>> + bl optprobe_optimized_callback
>>>> +
>>>> + ldr lr, [sp, #0x8]
>>>> + add sp, sp, #0x10
>>>> + ldr x0, [sp, #S_PSTATE]
>>>> + and x0, x0, #(PSR_N_BIT | PSR_Z_BIT | PSR_C_BIT | PSR_V_BIT)
>>>> + msr nzcv, x0
>>>> + ldp x0, x1, [sp, #S_X0]
>>>> + ldp x2, x3, [sp, #S_X2]
>>>> + ldp x4, x5, [sp, #S_X4]
>>>> + ldp x6, x7, [sp, #S_X6]
>>>> + ldp x8, x9, [sp, #S_X8]
>>>> + ldp x10, x11, [sp, #S_X10]
>>>> + ldp x12, x13, [sp, #S_X12]
>>>> + ldp x14, x15, [sp, #S_X14]
>>>> + ldp x16, x17, [sp, #S_X16]
>>>> + ldp x18, x19, [sp, #S_X18]
>>>> + ldp x20, x21, [sp, #S_X20]
>>>> + ldp x22, x23, [sp, #S_X22]
>>>> + ldp x24, x25, [sp, #S_X24]
>>>> + ldp x26, x27, [sp, #S_X26]
>>>> + ldp x28, x29, [sp, #S_X28]
>>>> + ret
>>>> +SYM_CODE_END(optprobe_common)
>>>> +
>>>> + .global optprobe_template_entry
>>>> +optprobe_template_entry:
>>>> + sub sp, sp, #PT_REGS_SIZE
>>>> + str lr, [sp, #S_LR]
>>>> + stp x0, x1, [sp, #S_X0]
>>>> + /* Get parameters to optimized_callback() */
>>>> + ldr x0, 1f
>>>> + .global optprobe_template_common
>>>> +optprobe_template_common:
>>>> + nop
>>>> + ldr lr, [sp, #S_LR]
>>>> + add sp, sp, #PT_REGS_SIZE
>>>> + .global optprobe_template_restore_orig_insn
>>>> +optprobe_template_restore_orig_insn:
>>>> + nop
>>>> + .global optprobe_template_restore_end
>>>> +optprobe_template_restore_end:
>>>> + nop
>>>> + .global optprobe_template_val
>>>> +optprobe_template_val:
>>>> + 1: .long 0
>>>> + .long 0
>>>> + .global optprobe_template_end
>>>> +optprobe_template_end:
>>>> diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
>>>> index 8c8f7a4d93af..7be680155df7 100644
>>>> --- a/include/linux/kprobes.h
>>>> +++ b/include/linux/kprobes.h
>>>> @@ -329,6 +329,7 @@ struct optimized_kprobe {
>>>> struct kprobe kp;
>>>> struct list_head list; /* list for optimizing queue */
>>>> struct arch_optimized_insn optinsn;
>>>> + void (*set_pc)(struct optimized_kprobe *op, struct pt_regs *regs);
>>>> };
>>>>
>>>> /* Architecture dependent functions for direct jump optimization */
>>>> @@ -345,6 +346,7 @@ extern int arch_within_optimized_kprobe(struct optimized_kprobe *op,
>>>> kprobe_opcode_t *addr);
>>>>
>>>> extern void opt_pre_handler(struct kprobe *p, struct pt_regs *regs);
>>>> +extern void optprobe_optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs);
>>>>
>>>> DEFINE_INSN_CACHE_OPS(optinsn);
>>>>
>>>> diff --git a/kernel/kprobes.c b/kernel/kprobes.c
>>>> index 21eccc961bba..d799e562a39a 100644
>>>> --- a/kernel/kprobes.c
>>>> +++ b/kernel/kprobes.c
>>>> @@ -430,6 +430,28 @@ void opt_pre_handler(struct kprobe *p, struct pt_regs *regs)
>>>> }
>>>> NOKPROBE_SYMBOL(opt_pre_handler);
>>>>
>>>> +void optprobe_optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
>>>> +{
>>>> + if (kprobe_disabled(&op->kp))
>>>> + return;
>>>> +
>>>> + preempt_disable();
>>>> +
>>>> + if (kprobe_running()) {
>>>> + kprobes_inc_nmissed_count(&op->kp);
>>>> + } else {
>>>> + op->set_pc(op, regs);
>>>> + __this_cpu_write(current_kprobe, &op->kp);
>>>> + get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
>>>> + opt_pre_handler(&op->kp, regs);
>>>> + __this_cpu_write(current_kprobe, NULL);
>>>> + }
>>>> +
>>>> + preempt_enable();
>>>> +}
>>>> +NOKPROBE_SYMBOL(optprobe_optimized_callback)
>>>> +
>>>> +
>>>> /* Free optimized instructions and optimized_kprobe */
>>>> static void free_aggr_kprobe(struct kprobe *p)
>>>> {
>>>> --
>>>> 2.33.0
>>>>
>>
>>
>> --
>> Masami Hiramatsu <mhiramat at kernel.org>
> .
>
More information about the linux-arm-kernel
mailing list