[PATCH V2 08/10] dt-bindings: media: nxp, imx8mq-vpu: Add support for G1 and G2 on imx8mm

[Adam Ford]

The i.MX8M mini appears to have a similar G1 and G2 decoder but the
post-procesing isn't present, so different compatible flags are requred.
Since all the other parameters are the same with imx8mq, just add
the new compatible flags to nxp,imx8mq-vpu.yaml.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
index c1e157251de7..b1f24c48c73b 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
@@ -5,7 +5,7 @@
 $id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ SoCs
+title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ/i.MX8MM SoCs
 
 maintainers:
   - Philipp Zabel <p.zabel at pengutronix.de>
@@ -20,6 +20,8 @@ properties:
         deprecated: true
       - const: nxp,imx8mq-vpu-g1
       - const: nxp,imx8mq-vpu-g2
+      - const: nxp,imx8mm-vpu-g1
+      - const: nxp,imx8mm-vpu-g2
 
   reg:
     maxItems: 1
@@ -66,3 +68,27 @@ examples:
                 clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
                 power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
         };
+  - |
+        #include <dt-bindings/clock/imx8mm-clock.h>
+        #include <dt-bindings/power/imx8mm-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g1: video-codec at 38300000 {
+                compatible = "nxp,imx8mm-vpu-g1";
+                reg = <0x38300000 0x10000>;
+                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+        };
+  - |
+        #include <dt-bindings/clock/imx8mm-clock.h>
+        #include <dt-bindings/power/imx8mm-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g2: video-codec at 38300000 {
+                compatible = "nxp,imx8mm-vpu-g2";
+                reg = <0x38310000 0x10000>;
+                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+        };
-- 
2.32.0