[PATCH net-next v8 3/6] arm64: dts: mt2712: update ethernet device node
Matthias Brugger
matthias.bgg at gmail.com
Wed Dec 15 11:20:04 PST 2021
On 10/12/2021 02:31, Biao Huang wrote:
> Since there are some changes in ethernet driver,
> update ethernet device node in dts to accommodate to it.
>
I have a hard time to understand how the changes in 1/6 and 2/6 are related to
that.
Please explain better what has changed. Also beware that we shouldn't introduce
any non-backward compatible DTS changes. That means, the device should work with
the new driver but an older device tree.
Regards,
Matthias
> Signed-off-by: Biao Huang <biao.huang at mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 1 +
> arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 14 +++++++++-----
> 2 files changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> index 7d369fdd3117..11aa135aa0f3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> @@ -110,6 +110,7 @@ ð {
> phy-handle = <ðernet_phy0>;
> mediatek,tx-delay-ps = <1530>;
> snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
> + snps,reset-delays-us = <0 10000 10000>;
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <ð_default>;
> pinctrl-1 = <ð_sleep>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> index a9cca9c146fd..9e850e04fffb 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> @@ -726,7 +726,7 @@ queue2 {
> };
>
> eth: ethernet at 1101c000 {
> - compatible = "mediatek,mt2712-gmac";
> + compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
> reg = <0 0x1101c000 0 0x1300>;
> interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
> interrupt-names = "macirq";
> @@ -734,15 +734,19 @@ eth: ethernet at 1101c000 {
> clock-names = "axi",
> "apb",
> "mac_main",
> - "ptp_ref";
> + "ptp_ref",
> + "rmii_internal";
> clocks = <&pericfg CLK_PERI_GMAC>,
> <&pericfg CLK_PERI_GMAC_PCLK>,
> <&topckgen CLK_TOP_ETHER_125M_SEL>,
> - <&topckgen CLK_TOP_ETHER_50M_SEL>;
> + <&topckgen CLK_TOP_ETHER_50M_SEL>,
> + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
> assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
> - <&topckgen CLK_TOP_ETHER_50M_SEL>;
> + <&topckgen CLK_TOP_ETHER_50M_SEL>,
> + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
> assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
> - <&topckgen CLK_TOP_APLL1_D3>;
> + <&topckgen CLK_TOP_APLL1_D3>,
> + <&topckgen CLK_TOP_ETHERPLL_50M>;
> power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
> mediatek,pericfg = <&pericfg>;
> snps,axi-config = <&stmmac_axi_setup>;
>
More information about the linux-arm-kernel
mailing list