[PATCH v2 2/3] ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter

Shawn Guo shawnguo at kernel.org
Wed Dec 15 22:55:11 PST 2021 

On Mon, Dec 13, 2021 at 01:38:32PM +0100, Yunus Bas wrote:
> The PEB-AV-02 expansion adapter extends the phyBOARD-Mira boards to
> connect parallel LCD displays, either with capacitive or resistive
> touch.
> 
> Signed-off-by: Yunus Bas <y.bas at phytec.de>
> ---
> Changes in v2:
> - Corrected confusing display node name
> - Updated edt_ft5406 compatible to fit dt-binding scheme
> - Removed some newlines
> ---
>  .../boot/dts/imx6dl-phytec-mira-rdk-nand.dts  |   1 +
>  .../boot/dts/imx6q-phytec-mira-rdk-emmc.dts   |   1 +
>  .../boot/dts/imx6q-phytec-mira-rdk-nand.dts   |   1 +
>  .../dts/imx6qdl-phytec-mira-peb-av-02.dtsi    | 119 ++++++++++++++++++
>  .../boot/dts/imx6qp-phytec-mira-rdk-nand.dts  |   1 +
>  5 files changed, 123 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
> 
> diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> index b057fa664a6b..8165fae2b1d1 100644
> --- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> @@ -9,6 +9,7 @@
>  #include "imx6qdl-phytec-phycore-som.dtsi"
>  #include "imx6qdl-phytec-mira.dtsi"
>  #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
>  
>  / {
>  	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
> diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> index db6e2cc36759..bbf5097ca974 100644
> --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> @@ -9,6 +9,7 @@
>  #include "imx6qdl-phytec-phycore-som.dtsi"
>  #include "imx6qdl-phytec-mira.dtsi"
>  #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
>  
>  / {
>  	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
> diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> index 51ff601b1aec..95051e18324f 100644
> --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> @@ -9,6 +9,7 @@
>  #include "imx6qdl-phytec-phycore-som.dtsi"
>  #include "imx6qdl-phytec-mira.dtsi"
>  #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
>  
>  / {
>  	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
> new file mode 100644
> index 000000000000..9fa1de1fcace
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2018 PHYTEC Messtechnik
> + * Author: Christian Hemp <c.hemp at phytec.de>
> + */
> +
> +/ {
> +	display: disp0 {

display0 for node name.

Shawn

> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "fsl,imx-parallel-display";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_disp0>;
> +		interface-pix-fmt = "rgb24";
> +		status = "disabled";
> +
> +		port at 0 {
> +			reg = <0>;
> +
> +			display0_in: endpoint {
> +				remote-endpoint = <&ipu1_di0_disp0>;
> +			};
> +		};
> +
> +		port at 1 {
> +			reg = <1>;
> +
> +			display0_out: endpoint {
> +				remote-endpoint = <&peb_panel_lcd_in>;
> +			};
> +		};
> +	};
> +
> +	panel-lcd {
> +		compatible = "edt,etm0700g0edh6";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_disp0_pwr>;
> +		power-supply = <&reg_display>;
> +		enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +		backlight = <&backlight>;
> +		status = "disabled";
> +
> +		port {
> +			peb_panel_lcd_in: endpoint {
> +				remote-endpoint = <&display0_out>;
> +			};
> +		};
> +	};
> +
> +	reg_display: regulator-peb-display {
> +		compatible = "regulator-fixed";
> +		regulator-name = "peb-display";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&i2c1 {
> +	edt_ft5x06: touchscreen at 38 {
> +		compatible = "edt,edt-ft5406";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_edt_ft5x06>;
> +		reg = <0x38>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <2 IRQ_TYPE_NONE>;
> +		status = "disabled";
> +        };
> +};
> +
> +&ipu1_di0_disp0 {
> +	remote-endpoint = <&display0_in>;
> +};
> +
> +&iomuxc {
> +	pinctrl_disp0: disp0grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
> +			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
> +			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
> +			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x1b080
> +			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
> +			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
> +			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
> +			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
> +			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
> +			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
> +			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
> +			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
> +			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
> +			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
> +			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
> +			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
> +			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
> +			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
> +			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
> +			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
> +			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
> +			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
> +			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
> +			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
> +			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
> +			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
> +			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
> +			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
> +		>;
> +	};
> +
> +	pinctrl_disp0_pwr: disp0pwrgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_edt_ft5x06: edtft5x06grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0xb0b1
> +		>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> index 06fe0c5315fc..343639cb035c 100644
> --- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> +++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> @@ -9,6 +9,7 @@
>  #include "imx6qdl-phytec-phycore-som.dtsi"
>  #include "imx6qdl-phytec-mira.dtsi"
>  #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
>  
>  / {
>  	model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
> -- 
> 2.25.1
>

More information about the linux-arm-kernel mailing list