[PATCH net-next v8 3/6] arm64: dts: mt2712: update ethernet device node

Matthias Brugger matthias.bgg at gmail.com
Wed Dec 15 11:22:57 PST 2021



On 10/12/2021 02:31, Biao Huang wrote:
> Since there are some changes in ethernet driver,
> update ethernet device node in dts to accommodate to it.
> 

I have a hard time to understand how the first two patches are related to this 
one. Please be more specific in your commit message.

Also please beware that we should make sure that a newer driver version should 
still work properly with an older device tree, which does not have your changes.

Regards,
Matthias

> Signed-off-by: Biao Huang <biao.huang at mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt2712-evb.dts |  1 +
>   arch/arm64/boot/dts/mediatek/mt2712e.dtsi   | 14 +++++++++-----
>   2 files changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> index 7d369fdd3117..11aa135aa0f3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> @@ -110,6 +110,7 @@ &eth {
>   	phy-handle = <&ethernet_phy0>;
>   	mediatek,tx-delay-ps = <1530>;
>   	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
> +	snps,reset-delays-us = <0 10000 10000>;
>   	pinctrl-names = "default", "sleep";
>   	pinctrl-0 = <&eth_default>;
>   	pinctrl-1 = <&eth_sleep>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> index a9cca9c146fd..9e850e04fffb 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> @@ -726,7 +726,7 @@ queue2 {
>   	};
>   
>   	eth: ethernet at 1101c000 {
> -		compatible = "mediatek,mt2712-gmac";
> +		compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
>   		reg = <0 0x1101c000 0 0x1300>;
>   		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
>   		interrupt-names = "macirq";
> @@ -734,15 +734,19 @@ eth: ethernet at 1101c000 {
>   		clock-names = "axi",
>   			      "apb",
>   			      "mac_main",
> -			      "ptp_ref";
> +			      "ptp_ref",
> +			      "rmii_internal";
>   		clocks = <&pericfg CLK_PERI_GMAC>,
>   			 <&pericfg CLK_PERI_GMAC_PCLK>,
>   			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
> -			 <&topckgen CLK_TOP_ETHER_50M_SEL>;
> +			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
> +			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
>   		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
> -				  <&topckgen CLK_TOP_ETHER_50M_SEL>;
> +				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
> +				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
>   		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
> -					 <&topckgen CLK_TOP_APLL1_D3>;
> +					 <&topckgen CLK_TOP_APLL1_D3>,
> +					 <&topckgen CLK_TOP_ETHERPLL_50M>;
>   		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
>   		mediatek,pericfg = <&pericfg>;
>   		snps,axi-config = <&stmmac_axi_setup>;
> 



More information about the linux-arm-kernel mailing list