[PATCH v2 4/5] irqchip/stm32-exti: add STM32MP13 support

[Alexandre Torgue]

Enhance stm32-exti driver to support STM32MP13 SoC. This SoC uses the same
hardware version than STM32MP15. Only EXTI line mapping is changed and
following EXTI lines are supported: GPIO, RTC, I2C[1-5], UxART[1-8],
USBH_EHCI, USBH_OHCI, USB_OTG, LPTIM[1-5], ETH[1-2].

Signed-off-by: Alexandre Torgue <alexandre.torgue at foss.st.com>

diff --git a/drivers/irqchip/irq-stm32-exti.c b/drivers/irqchip/irq-stm32-exti.c
index b56530675799..646fd15972c9 100644
--- a/drivers/irqchip/irq-stm32-exti.c
+++ b/drivers/irqchip/irq-stm32-exti.c
@@ -224,6 +224,11 @@ static const struct stm32_exti_drv_data stm32mp1_drv_data = {
 	.irq_nr = ARRAY_SIZE(stm32mp1_desc_irq),
 };
 
+static const struct stm32_exti_drv_data stm32mp13_drv_data = {
+	.exti_banks = stm32mp1_exti_banks,
+	.bank_nr = ARRAY_SIZE(stm32mp1_exti_banks),
+};
+
 static struct
 stm32_desc_irq *stm32_exti_get_desc(struct stm32_exti_host_data *host_data, irq_hw_number_t hwirq)
 {
@@ -981,6 +986,7 @@ static int stm32_exti_probe(struct platform_device *pdev)
 /* platform driver only for MP1 */
 static const struct of_device_id stm32_exti_ids[] = {
 	{ .compatible = "st,stm32mp1-exti", .data = &stm32mp1_drv_data},
+	{ .compatible = "st,stm32mp13-exti", .data = &stm32mp13_drv_data},
 	{},
 };
 MODULE_DEVICE_TABLE(of, stm32_exti_ids);
-- 
2.17.1