[PATCH v3 05/10] irqchip/apple-aic: Wire PMU interrupts

Marc Zyngier maz at kernel.org
Tue Dec 14 10:26:29 PST 2021


Add the necessary code to configure and P and E-core PMU interrupts
with their respective affinities. When such an interrupt fires, map
it onto the right pseudo-interrupt.

Reviewed-by: Hector Martin <marcan at marcan.st>
Signed-off-by: Marc Zyngier <maz at kernel.org>
---
 drivers/irqchip/irq-apple-aic.c | 34 +++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/irqchip/irq-apple-aic.c b/drivers/irqchip/irq-apple-aic.c
index b51eb9468701..ceb7a68101e1 100644
--- a/drivers/irqchip/irq-apple-aic.c
+++ b/drivers/irqchip/irq-apple-aic.c
@@ -155,7 +155,7 @@
 #define SYS_IMP_APL_UPMSR_EL1		sys_reg(3, 7, 15, 6, 4)
 #define UPMSR_IACT			BIT(0)
 
-#define AIC_NR_FIQ		4
+#define AIC_NR_FIQ		6
 #define AIC_NR_SWIPI		32
 
 /*
@@ -416,16 +416,15 @@ static void __exception_irq_entry aic_handle_fiq(struct pt_regs *regs)
 						  aic_irqc->nr_hw + AIC_TMR_EL02_VIRT);
 	}
 
-	if ((read_sysreg_s(SYS_IMP_APL_PMCR0_EL1) & (PMCR0_IMODE | PMCR0_IACT)) ==
-			(FIELD_PREP(PMCR0_IMODE, PMCR0_IMODE_FIQ) | PMCR0_IACT)) {
-		/*
-		 * Not supported yet, let's figure out how to handle this when
-		 * we implement these proprietary performance counters. For now,
-		 * just mask it and move on.
-		 */
-		pr_err_ratelimited("PMC FIQ fired. Masking.\n");
-		sysreg_clear_set_s(SYS_IMP_APL_PMCR0_EL1, PMCR0_IMODE | PMCR0_IACT,
-				   FIELD_PREP(PMCR0_IMODE, PMCR0_IMODE_OFF));
+	if (read_sysreg_s(SYS_IMP_APL_PMCR0_EL1) & PMCR0_IACT) {
+		int irq;
+		if (cpumask_test_cpu(smp_processor_id(),
+				     &aic_irqc->fiq_aff[AIC_CPU_PMU_P]->aff))
+			irq = AIC_CPU_PMU_P;
+		else
+			irq = AIC_CPU_PMU_E;
+		generic_handle_domain_irq(aic_irqc->hw_domain,
+					  aic_irqc->nr_hw + irq);
 	}
 
 	if (FIELD_GET(UPMCR0_IMODE, read_sysreg_s(SYS_IMP_APL_UPMCR0_EL1)) == UPMCR0_IMODE_FIQ &&
@@ -465,7 +464,18 @@ static int aic_irq_domain_map(struct irq_domain *id, unsigned int irq,
 				    handle_fasteoi_irq, NULL, NULL);
 		irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(irq)));
 	} else {
-		irq_set_percpu_devid(irq);
+		int fiq = hw - ic->nr_hw;
+
+		switch (fiq) {
+		case AIC_CPU_PMU_P:
+		case AIC_CPU_PMU_E:
+			irq_set_percpu_devid_partition(irq, &ic->fiq_aff[fiq]->aff);
+			break;
+		default:
+			irq_set_percpu_devid(irq);
+			break;
+		}
+
 		irq_domain_set_info(id, irq, hw, &fiq_chip, id->host_data,
 				    handle_percpu_devid_irq, NULL, NULL);
 	}
-- 
2.30.2




More information about the linux-arm-kernel mailing list