[PATCH v3 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source

[Li Yang]

From: Biwen Li <biwen.li at nxp.com>

Add flextimer2 based ftm_alarm1 node and enable it to be the default rtc
wakeup source for rdb and qds boards instead of the original flextimer1
which is used by PWM.  The ftm_alarm0 node hence is disabled by default.

Signed-off-by: Biwen Li <biwen.li at nxp.com>
Signed-off-by: Li Yang <leoyang.li at nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 6 +++++-
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 6 +++++-
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 9 +++++++++
 3 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 6e2a1da662fb..00d5b81bdef3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -25,7 +25,7 @@ aliases {
 		serial1 = &duart1;
 		mmc0 = &esdhc;
 		mmc1 = &esdhc1;
-		rtc1 = &ftm_alarm0;
+		rtc1 = &ftm_alarm1;
 	};
 
 	chosen {
@@ -234,6 +234,10 @@ mt35xu02g0: flash at 0 {
 	};
 };
 
+&ftm_alarm1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 7719f44bcaed..41900d351a92 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -21,7 +21,7 @@ aliases {
 		serial1 = &duart1;
 		mmc0 = &esdhc;
 		mmc1 = &esdhc1;
-		rtc1 = &ftm_alarm0;
+		rtc1 = &ftm_alarm1;
 	};
 
 	chosen {
@@ -132,6 +132,10 @@ mt35xu02g0: flash at 0 {
 	};
 };
 
+&ftm_alarm1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 9010c535252a..f2564faf7067 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1198,6 +1198,15 @@ ftm_alarm0: timer at 2800000 {
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ftm_alarm1: timer at 2810000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2810000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 	};
 
-- 
2.25.1