[PATCH V2] ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layer

[Christoph Niedermaier]

Add USB overcurrent pin muxing on SoM layer. On DRC02 and PDK2 the USB
overcurrent pin isn't connected, but a USB hub on the board takes care
of the USB overcurrent instead. Therefore disable it there with the
property disable-over-current.

Signed-off-by: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Marek Vasut <marex at denx.de>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: kernel at dh-electronics.com
To: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi | 4 ++++
 arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi  | 4 ++++
 arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi   | 1 +
 3 files changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
index 3d0a50a9ab21..702cd4a1b2e6 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
@@ -95,6 +95,10 @@
 	rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
 };
 
+&usbh1 {
+	disable-over-current;
+};
+
 &usdhc2 { /* SD card */
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
index dc21853706a5..dc89b554e694 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -260,6 +260,10 @@
 	status = "okay";
 };
 
+&usbh1 {
+	disable-over-current;
+};
+
 &usdhc2 { /* SD card */
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
index 5d10c40313cb..ed5ba358d4cb 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
@@ -728,6 +728,7 @@
 	pinctrl_usbh1: usbh1-grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120b0
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x1b0b1
 		>;
 	};
 
-- 
2.11.0