[PATCH v2 6/8] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus

[Shawn Guo]

On Fri, Dec 03, 2021 at 06:17:16PM -0600, Li Yang wrote:
> From: Biwen Li <biwen.li at nxp.com>
> 
> The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.
> 
> Signed-off-by: Biwen Li <biwen.li at nxp.com>
> Signed-off-by: Li Yang <leoyang.lil at nxp.com>

Do we need a Fixes tag?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 00d5b81bdef3..baa1cc9b9835 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -276,11 +276,6 @@ temperature-sensor at 4c {
>  				vcc-supply = <&sb_3v3>;
>  			};
>  
> -			rtc at 51 {
> -				compatible = "nxp,pcf2129";
> -				reg = <0x51>;
> -			};
> -
>  			eeprom at 56 {
>  				compatible = "atmel,24c512";
>  				reg = <0x56>;
> @@ -322,6 +317,15 @@ mux: mux-controller {
>  
>  };
>  
> +&i2c1 {
> +	status = "okay";
> +
> +	rtc at 51 {
> +		compatible = "nxp,pcf2129";
> +		reg = <0x51>;
> +	};
> +};
> +
>  &enetc_port1 {
>  	phy-handle = <&qds_phy1>;
>  	phy-mode = "rgmii-id";
> -- 
> 2.25.1
>