[PATCH v2 1/8] arm64: dts: ls1028a: Add PCIe EP nodes

[Shawn Guo]

On Fri, Dec 03, 2021 at 06:17:11PM -0600, Li Yang wrote:
> From: Xiaowei Bao <xiaowei.bao at nxp.com>
> 
> Add PCIe EP nodes for ls1028a to support EP mode.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
> Signed-off-by: Li Yang <leoyang.li at nxp.com>
> ---
>  .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index fd3f3e8bb6ce..9efcaf68578c 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -637,6 +637,18 @@ pcie1: pcie at 3400000 {
>  			status = "disabled";
>  		};
>  
> +		pcie_ep1: pcie_ep at 3400000 {

pcie-ep

Shawn

> +			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
> +			reg = <0x00 0x03400000 0x0 0x00100000
> +			       0x80 0x00000000 0x8 0x00000000>;
> +			reg-names = "regs", "addr_space";
> +			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
> +			interrupt-names = "pme";
> +			num-ib-windows = <6>;
> +			num-ob-windows = <8>;
> +			status = "disabled";
> +		};
> +
>  		pcie2: pcie at 3500000 {
>  			compatible = "fsl,ls1028a-pcie";
>  			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
> @@ -664,6 +676,18 @@ pcie2: pcie at 3500000 {
>  			status = "disabled";
>  		};
>  
> +		pcie_ep2: pcie_ep at 3500000 {
> +			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
> +			reg = <0x00 0x03500000 0x0 0x00100000
> +			       0x88 0x00000000 0x8 0x00000000>;
> +			reg-names = "regs", "addr_space";
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
> +			interrupt-names = "pme";
> +			num-ib-windows = <6>;
> +			num-ob-windows = <8>;
> +			status = "disabled";
> +		};
> +
>  		smmu: iommu at 5000000 {
>  			compatible = "arm,mmu-500";
>  			reg = <0 0x5000000 0 0x800000>;
> -- 
> 2.25.1
>