[PATCH v6 1/6] ARM: dts: Cygnus: Fixed iProc PCIe controller properties
Florian Fainelli
f.fainelli at gmail.com
Mon Dec 13 19:58:15 PST 2021
Rename the msi controller unit name to 'msi' to avoid collisions with
the 'msi-controller' boolean property. We also need to re-arrange the
'ranges' property to show the two cells as being separate instead of
combined since the DT checker is not able to differentiate otherwise.
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 8ecb7861ce10..e73a19409d71 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -274,8 +274,8 @@ pcie0: pcie at 18012000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x81000000 0 0 0x28000000 0 0x00010000
- 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000>,
+ <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
phys = <&pcie0_phy>;
phy-names = "pcie-phy";
@@ -283,7 +283,7 @@ pcie0: pcie at 18012000 {
status = "disabled";
msi-parent = <&msi0>;
- msi0: msi-controller {
+ msi0: msi {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
@@ -309,8 +309,8 @@ pcie1: pcie at 18013000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x81000000 0 0 0x48000000 0 0x00010000
- 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000>,
+ <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
phys = <&pcie1_phy>;
phy-names = "pcie-phy";
@@ -318,7 +318,7 @@ pcie1: pcie at 18013000 {
status = "disabled";
msi-parent = <&msi1>;
- msi1: msi-controller {
+ msi1: msi {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
--
2.25.1
More information about the linux-arm-kernel
mailing list