[RFC PATCH devicetree 10/10] dt-bindings: ls-extirq: add a YAML schema for the validator
Vladimir Oltean
vladimir.oltean at nxp.com
Mon Dec 13 17:38:00 PST 2021
This is a conversion of the free-form description of the device tree
bindings to a YAML schema. The description of fsl,extirq-map is best
effort: it looks like the devicetree schema doesn't really like vendor
properties getting too complicated, and puts a bunch of descriptions on
what they can and can't describe. An array of uint32s is the best I
could come up with. It doesn't help, either, that the
schemas/interrupt-controller.yaml definition for interrupt-map, which
I was planning to use as an inspiration, is "true # FIXME", all things
which aren't valid in vendor properties.
Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
.../interrupt-controller/fsl,ls-extirq.txt | 56 ---------
.../interrupt-controller/fsl,ls-extirq.yaml | 110 ++++++++++++++++++
2 files changed, 110 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
deleted file mode 100644
index cddf1aa032be..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Freescale Layerscape external IRQs
-
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
-LS1088A, LS208xA, LX216xA) support inverting
-the polarity of certain external interrupt lines.
-
-The device node must be a child of the node representing the
-Supplemental Configuration Unit (SCFG).
-
-Required properties:
-- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
- "fsl,ls1043a-extirq": for LS1043A, LS1046A.
- "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
-- #interrupt-cells: Must be 2. The first element is the index of the
- external interrupt line. The second element is the trigger type.
-- #address-cells: Must be 0.
-- interrupt-controller: Identifies the node as an interrupt controller
-- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
- the SCFG or the External Interrupt Control Register (IRQCR) in
- the ISC.
-- fsl,extirq-map: An array of elements through which the mapping between
- external interrupts and GIC interrupts is specified. The first member of each
- array element is the index of the extirq line. The second member must be
- zero. The third member must be a phandle to the interrupt parent (the GIC).
- The remaining number of members in an array element depends on the
- #interrupt-cells property of the interrupt parent, and are used to specify
- the parent interrupt.
-
-Example:
- scfg: scfg at 1570000 {
- compatible = "fsl,ls1021a-scfg", "syscon";
- reg = <0x0 0x1570000 0x0 0x10000>;
- big-endian;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x1570000 0x10000>;
-
- extirq: interrupt-controller at 1ac {
- compatible = "fsl,ls1021a-extirq";
- #interrupt-cells = <2>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1ac 4>;
- fsl,extirq-map =
- <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
-
- interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 000000000000..ead5f58949b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape external interrupt driver
+
+maintainers:
+ - Rasmus Villemoes <linux at rasmusvillemoes.dk>
+
+description: |
+ Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA, LX216xA)
+ support inverting the polarity of certain external interrupt lines.
+ The device node must be a child of the node representing the
+ Supplemental Configuration Unit (SCFG).
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,ls1021a-extirq
+ - const: fsl,ls1043a-extirq
+ - const: fsl,ls1088a-extirq
+ - items:
+ - const: fsl,ls1046a-extirq
+ - const: fsl,ls1043a-extirq
+ - items:
+ - const: fsl,lx2160a-extirq
+ - const: fsl,ls1088a-extirq
+ - items:
+ - const: fsl,ls2080a-extirq
+ - const: fsl,ls1088a-extirq
+
+ reg:
+ description: |
+ Specifies the offset to the Interrupt Polarity Control Register (INTPCR)
+ in the SCFG or the External Interrupt Control Register (IRQCR) in the
+ ISC.
+ maxItems: 1
+
+ "#interrupt-cells":
+ description: |
+ Specifies the number of cells needed to encode an interrupt source. Must
+ be equal to 2. The first element is the index of the external interrupt
+ line. The second element is the trigger type.
+ const: 2
+
+ "#address-cells":
+ const: 0
+
+ interrupt-controller: true
+
+ fsl,extirq-map:
+ description: |
+ An array of elements through which the mapping between external
+ interrupts and GIC interrupts is specified. This isn't really a phandle
+ array, it just contains some phandles. It should really be an array where
+ the items are extirq-map-spec elements, but it seems like the
+ vendor-props.yaml don't allow us to reference such things.
+ type: object
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+required:
+ - compatible
+ - reg
+ - "#interrupt-cells"
+ - interrupt-controller
+ - fsl,extirq-map
+
+additionalProperties: false
+
+$defs:
+ extirq-map-spec:
+ description: |
+ The first member of each array element is the index of the extirq line.
+ The second member must be zero. The third member must be a phandle to the
+ interrupt parent. The remaining number of members in an array element
+ depends on the "#interrupt-cells" property of the interrupt parent, and
+ are used to specify the parent interrupt.
+ type: array
+ items:
+ $ref: "/schemas/types.yaml#/definitions/cell"
+ minItems: 4
+ maxItems: 4095
+
+examples:
+ - |
+ scfg: scfg at 1570000 {
+ compatible = "fsl,ls1021a-scfg", "syscon";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ big-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1570000 0x10000>;
+
+ extirq: interrupt-controller at 1ac {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ fsl,extirq-map =
+ <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
--
2.25.1
More information about the linux-arm-kernel
mailing list