[PATCH] dt-bindings: convert power domain node for rockchip DW MIPI DSI
Rob Herring
robh at kernel.org
Mon Dec 13 14:47:27 PST 2021
On Mon, Dec 06, 2021 at 10:26:50PM +0100, David Heidelberg wrote:
> Convert into YAML format into format, which can be validated.
>
> Changes:
> - drop panel from example
>
> Signed-off-by: David Heidelberg <david at ixit.cz>
> ---
> .../display/rockchip/dw_mipi_dsi_rockchip.txt | 93 --------
> .../rockchip/rockchip,dw-mipi-dsi.yaml | 200 ++++++++++++++++++
> 2 files changed, 200 insertions(+), 93 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> deleted file mode 100644
> index 39792f051d2d..000000000000
> --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> +++ /dev/null
> @@ -1,93 +0,0 @@
> -Rockchip specific extensions to the Synopsys Designware MIPI DSI
> -================================
> -
> -Required properties:
> -- #address-cells: Should be <1>.
> -- #size-cells: Should be <0>.
> -- compatible: one of
> - "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
> - "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
> - "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
> -- reg: Represent the physical address range of the controller.
> -- interrupts: Represent the controller's interrupt to the CPU(s).
> -- clocks, clock-names: Phandles to the controller's pll reference
> - clock(ref) when using an internal dphy and APB clock(pclk).
> - For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
> - are required. As described in [1].
> -- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
> -- ports: contain a port node with endpoint definitions as defined in [2].
> - For vopb,set the reg = <0> and set the reg = <1> for vopl.
> -- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
> -- video port 1 for either a panel or subsequent encoder
> -
> -Optional properties:
> -- phys: from general PHY binding: the phandle for the PHY device.
> -- phy-names: Should be "dphy" if phys references an external phy.
> -- #phy-cells: Defined when used as ISP phy, should be 0.
> -- power-domains: a phandle to mipi dsi power domain node.
> -- resets: list of phandle + reset specifier pairs, as described in [3].
> -- reset-names: string reset name, must be "apb".
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/media/video-interfaces.txt
> -[3] Documentation/devicetree/bindings/reset/reset.txt
> -
> -Example:
> - mipi_dsi: mipi at ff960000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
> - reg = <0xff960000 0x4000>;
> - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
> - clock-names = "ref", "pclk";
> - resets = <&cru SRST_MIPIDSI0>;
> - reset-names = "apb";
> - rockchip,grf = <&grf>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - mipi_in: port at 0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - mipi_in_vopb: endpoint at 0 {
> - reg = <0>;
> - remote-endpoint = <&vopb_out_mipi>;
> - };
> - mipi_in_vopl: endpoint at 1 {
> - reg = <1>;
> - remote-endpoint = <&vopl_out_mipi>;
> - };
> - };
> -
> - mipi_out: port at 1 {
> - reg = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - mipi_out_panel: endpoint {
> - remote-endpoint = <&panel_in_mipi>;
> - };
> - };
> - };
> -
> - panel {
> - compatible ="boe,tv080wum-nl0";
> - reg = <0>;
> -
> - enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&lcd_en>;
> - backlight = <&backlight>;
> -
> - port {
> - panel_in_mipi: endpoint {
> - remote-endpoint = <&mipi_out_panel>;
> - };
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
> new file mode 100644
> index 000000000000..7efa201e0e51
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
> @@ -0,0 +1,200 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
> +
> +maintainers:
> + - opensource at rock-chips.com
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: rockchip,px30-mipi-dsi
> + then:
> + properties:
> + clocks:
> + maxItems: 1
> + clock-names:
> + items:
> + - const: pclk
It's amazing that this version of the h/w can work without a reference
clock. I only point that out because it means you can't really use
bridge/snps,dw-mipi-dsi.yaml...
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: rockchip,rk3288-mipi-dsi
> + then:
> + properties:
> + clocks:
> + maxItems: 2
> + clock-names:
> + items:
> + - const: ref
> + - const: pclk
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: rockchip,rk3399-mipi-dsi
> + then:
> + properties:
> + clocks:
> + minItems: 4
> + maxItems: 4
> + clock-names:
> + items:
> + - const: ref
> + - const: pclk
> + - const: phy_cfg
> + - const: grf
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - rockchip,px30-mipi-dsi
> + - rockchip,rk3288-mipi-dsi
> + - rockchip,rk3399-mipi-dsi
> + - const: snps,dw-mipi-dsi
> + - items:
> + - const: rockchip,px30-mipi-dsi
> + - items:
> + - const: rockchip,rk3288-mipi-dsi
> + - items:
> + - const: rockchip,rk3399-mipi-dsi
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks: true
> +
> + clock-names: true
> +
> + phys:
> + maxItems: 1
> + description: The external PHY
> +
> + phy-names:
> + const: dphy
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port at 0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
You are not defining any extra port or endpoint properties, so you can
use '/schemas/graph.yaml#/properties/port' here.
> + description: >
> + Video port for the VOP input.
> +
> + properties:
> + endpoint at 0:
> + $ref: /schemas/graph.yaml#/properties/endpoint
> + description: Connection to the VOPB
> +
> + endpoint at 1:
> + $ref: /schemas/graph.yaml#/properties/endpoint
> + description: Connection to the VOPL
> +
> + required:
> + - endpoint at 0
> +
> + port at 1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: >
> + Video port for panel or subsequent encoder
> +
> + required:
> + - port at 0
> + - port at 1
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + items:
> + - const: apb
> +
> + rockchip,grf:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to the GRF to mux vopl/vopb
> +
> + power-domains: true
> +
> + '#address-cells':
> + const: 1
> +
> + '#phy-cells':
> + const: 0
> +
> + '#size-cells':
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - rockchip,grf
> + - ports
> + - '#address-cells'
> + - '#size-cells'
> +
> +additionalProperties: true
This is pretty much never right except for common bindings referenced by
another schema. You need to reference dsi-controller.yaml and use
'unevaluatedProperties: false'.
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rk3288-cru.h>
> +
> + mipi_dsi: mipi at ff960000 {
dsi at ...
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
> + reg = <0xff960000 0x4000>;
> + interrupts = <0 83 4>;
> + clocks = <&cru 148>, <&cru PCLK_MIPI_DSI0>;
> + clock-names = "ref", "pclk";
> + resets = <&cru SRST_MIPIDSI0>;
> + reset-names = "apb";
> + rockchip,grf = <&grf>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mipi_in: port at 0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mipi_in_vopb: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&vopb_out_mipi>;
> + };
> + mipi_in_vopl: endpoint at 1 {
> + reg = <1>;
> + remote-endpoint = <&vopl_out_mipi>;
> + };
> + };
> +
> + mipi_out: port at 1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mipi_out_panel: endpoint {
> + remote-endpoint = <&panel_in_mipi>;
> + };
> + };
> + };
> + };
> --
> 2.33.0
>
>
More information about the linux-arm-kernel
mailing list