[PATCH v2 0/2] new emtrion hardware emCON-MX8M Mini

[reinhold.mueller at emtrion.com]

From: Reinhold Mueller <reinhold.mueller at emtrion.com>

This patchset adds support for the emtrion emCON-MX8M Mini

Changes

v2:
[PATCH 1/2]
	- no fixes
[PATCH 2/2]
	- replaced GPIO_ACTIVE_LOW by IRQ_TYPE_LEVEL_LOW

v1:
[PATCH 0/2]
	- split former patch in dts -and yaml patches
[PATCH 1/2]
	- removing character '\t'
[PATCH 2/2]
	- correct entry compatible in spi-flash at 0

Reinhold Mueller (2):
  dt-bindings: arm: Add emtrion hardware emCON-MX8M Mini
  arm64: dts: imx8mm: Add support for emtrion emCON-MX8M Mini

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   3 +-
 .../boot/dts/freescale/imx8mm-emcon-avari.dts |  23 +
 .../dts/freescale/imx8mm-emcon-avari.dtsi     | 141 ++++
 .../boot/dts/freescale/imx8mm-emcon.dtsi      | 645 ++++++++++++++++++
 5 files changed, 812 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi

-- 
2.20.1