[RFC PATCH 1/2] pmic-cpcap: add motorola,droid3 compatible

[Merlijn Wajer]

Hi Tony,

On 13/12/2021 06:57, Tony Lindgren wrote:
> * Merlijn Wajer <merlijn at wizzup.org> [211212 23:00]:
>> The Droid 3 and the Bionic appear to share the same hardware, so add
>> the compatible for the Droid 3 as well.
>>
>> Signed-off-by: Merlijn Wajer <merlijn at wizzup.org>
>> ---
>>  arch/arm/mach-omap2/pmic-cpcap.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
>> index 668dc84fd31e..b9188dde13b9 100644
>> --- a/arch/arm/mach-omap2/pmic-cpcap.c
>> +++ b/arch/arm/mach-omap2/pmic-cpcap.c
>> @@ -245,7 +245,8 @@ int __init omap4_cpcap_init(void)
>>  	voltdm = voltdm_lookup("mpu");
>>  	omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu);
>>  
>> -	if (of_machine_is_compatible("motorola,droid-bionic")) {
>> +	if (of_machine_is_compatible("motorola,droid-bionic") ||
>> +	    of_machine_is_compatible("motorola,droid3")) {
>>  		voltdm = voltdm_lookup("core");
>>  		omap_voltage_register_pmic(voltdm, &omap_cpcap_core);
>>  
> 
> Looks OK to me, however we should also add all the mapphones to the
> Documentation/devicetree/bindings/arm/omap/omap.txt so we can avoid
> dtb check warnings. Care to also do a patch for that? Looks like the
> others are missing too.

Sure, I'll do that and add the others too while at it. Shall I add those
to this patch, or make a separate patch?

Regards,
Merlijn