[PATCH v3 3/3] drm/vc4: Notify the firmware when DRM is in charge

[Maxime Ripard]

Once the call to drm_fb_helper_remove_conflicting_framebuffers() has
been made, simplefb has been unregistered and the KMS driver is entirely
in charge of the display.

Thus, we can notify the firmware it can free whatever resource it was
using to maintain simplefb functional.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_drv.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index 8ab89f805826..e26897cb49a9 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -37,6 +37,8 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_vblank.h>
 
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
 #include "uapi/drm/vc4_drm.h"
 
 #include "vc4_drv.h"
@@ -215,6 +217,7 @@ static void vc4_match_add_drivers(struct device *dev,
 static int vc4_drm_bind(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct rpi_firmware *firmware = NULL;
 	struct drm_device *drm;
 	struct vc4_dev *vc4;
 	struct device_node *node;
@@ -251,10 +254,29 @@ static int vc4_drm_bind(struct device *dev)
 	if (ret)
 		return ret;
 
+	node = of_find_compatible_node(NULL, NULL, "raspberrypi,bcm2835-firmware");
+	if (node) {
+		firmware = rpi_firmware_get(node);
+		of_node_put(node);
+
+		if (!firmware)
+			return -EPROBE_DEFER;
+	}
+
 	ret = drm_aperture_remove_framebuffers(false, &vc4_drm_driver);
 	if (ret)
 		return ret;
 
+	if (firmware) {
+		ret = rpi_firmware_property(firmware,
+					    RPI_FIRMWARE_NOTIFY_DISPLAY_DONE,
+					    NULL, 0);
+		if (ret)
+			drm_warn(drm, "Couldn't stop firmware display driver: %d\n", ret);
+
+		rpi_firmware_put(firmware);
+	}
+
 	ret = component_bind_all(dev, drm);
 	if (ret)
 		return ret;
-- 
2.33.1