[PATCH net-next v8 6/6] net: dt-bindings: dwmac: add support for mt8195

[Biao Huang]

Dear Rob,
	Thanks for your comment~
On Fri, 2021-12-10 at 12:52 -0600, Rob Herring wrote:
> On Fri, Dec 10, 2021 at 09:31:29AM +0800, Biao Huang wrote:
> > Add binding document for the ethernet on mt8195.
> > 
> > Signed-off-by: Biao Huang <biao.huang at mediatek.com>
> > ---
> >  .../bindings/net/mediatek-dwmac.yaml          | 86
> > +++++++++++++++----
> >  1 file changed, 70 insertions(+), 16 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/mediatek-
> > dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-
> > dwmac.yaml
> > index 9207266a6e69..fb04166404d8 100644
> > --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> > @@ -19,11 +19,67 @@ select:
> >        contains:
> >          enum:
> >            - mediatek,mt2712-gmac
> > +          - mediatek,mt8195-gmac
> >    required:
> >      - compatible
> >  
> >  allOf:
> >    - $ref: "snps,dwmac.yaml#"
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - mediatek,mt2712-gmac
> > +
> > +    then:
> > +      properties:
> > +        clocks:
> > +          minItems: 5
> > +          items:
> > +            - description: AXI clock
> > +            - description: APB clock
> > +            - description: MAC Main clock
> > +            - description: PTP clock
> > +            - description: RMII reference clock provided by MAC
> > +
> > +        clock-names:
> > +          minItems: 5
> > +          items:
> > +            - const: axi
> > +            - const: apb
> > +            - const: mac_main
> > +            - const: ptp_ref
> > +            - const: rmii_internal
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - mediatek,mt8195-gmac
> > +
> > +    then:
> > +      properties:
> > +        clocks:
> > +          minItems: 6
> > +          items:
> > +            - description: AXI clock
> > +            - description: APB clock
> > +            - description: MAC clock gate
> 
> Add new clocks on to the end of existing clocks. That will simplify
> the 
> binding as here you will just need 'minItems: 6'.
The "rmii_internal" clock is a special one we put it to the end on
purpose, and will turn it on/off in driver according to whether
phy_mode is rmii or not.

So the "mac_cg" clock, which is new for mt8195, and not used in mt2712,
can't put it to the end for simplicity.

Can we just keep it this way? or other suggestions?

[v3 reply]

http://lists.infradead.org/pipermail/linux-mediatek/2021-November/031951.html
> > +            - description: MAC Main clock
> > +            - description: PTP clock
> > +            - description: RMII reference clock provided by MAC
> > +
> > +        clock-names:
> > +          minItems: 6
> > +          items:
> > +            - const: axi
> > +            - const: apb
> > +            - const: mac_cg
> > +            - const: mac_main
> > +            - const: ptp_ref
> > +            - const: rmii_internal
> >  
> >  properties:
> >    compatible:
> > @@ -32,22 +88,10 @@ properties:
> >            - enum:
> >                - mediatek,mt2712-gmac
> >            - const: snps,dwmac-4.20a
> > -
> > -  clocks:
> > -    items:
> > -      - description: AXI clock
> > -      - description: APB clock
> > -      - description: MAC Main clock
> > -      - description: PTP clock
> > -      - description: RMII reference clock provided by MAC
> > -
> > -  clock-names:
> > -    items:
> > -      - const: axi
> > -      - const: apb
> > -      - const: mac_main
> > -      - const: ptp_ref
> > -      - const: rmii_internal
> > +      - items:
> > +          - enum:
> > +              - mediatek,mt8195-gmac
> > +          - const: snps,dwmac-5.10a
> >  
> >    mediatek,pericfg:
> >      $ref: /schemas/types.yaml#/definitions/phandle
> > @@ -62,6 +106,8 @@ properties:
> >        or will round down. Range 0~31*170.
> >        For MT2712 RMII/MII interface, Allowed value need to be a
> > multiple of 550,
> >        or will round down. Range 0~31*550.
> > +      For MT8195 RGMII/RMII/MII interface, Allowed value need to
> > be a multiple of 290,
> > +      or will round down. Range 0~31*290.
> >  
> >    mediatek,rx-delay-ps:
> >      description:
> > @@ -70,6 +116,8 @@ properties:
> >        or will round down. Range 0~31*170.
> >        For MT2712 RMII/MII interface, Allowed value need to be a
> > multiple of 550,
> >        or will round down. Range 0~31*550.
> > +      For MT8195 RGMII/RMII/MII interface, Allowed value need to
> > be a multiple
> > +      of 290, or will round down. Range 0~31*290.
> >  
> >    mediatek,rmii-rxc:
> >      type: boolean
> > @@ -103,6 +151,12 @@ properties:
> >        3. the inside clock, which be sent to MAC, will be inversed
> > in RMII case when
> >           the reference clock is from MAC.
> >  
> > +  mediatek,mac-wol:
> > +    type: boolean
> > +    description:
> > +      If present, indicates that MAC supports WOL(Wake-On-LAN),
> > and MAC WOL will be enabled.
> > +      Otherwise, PHY WOL is perferred.
> > +
> >  required:
> >    - compatible
> >    - reg
> > -- 
> > 2.25.1
> > 
> >