[PATCH V5 2/6] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver

[Charles Mirabile]

This patch implements support for the joystick.
It supports left/right/up/down/enter and is
attached via i2c and a gpio pin for irq.

Signed-off-by: Charles Mirabile <cmirabil at redhat.com>
Co-developed-by: Mwesigwa Guma <mguma at redhat.com>
Signed-off-by: Mwesigwa Guma <mguma at redhat.com>
Co-developed-by: Joel Savitz <jsavitz at redhat.com>
Signed-off-by: Joel Savitz <jsavitz at redhat.com>
---
 drivers/input/joystick/Kconfig             |   8 ++
 drivers/input/joystick/Makefile            |   1 +
 drivers/input/joystick/sensehat-joystick.c | 119 +++++++++++++++++++++
 3 files changed, 128 insertions(+)
 create mode 100644 drivers/input/joystick/sensehat-joystick.c

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 3b23078bc7b5..d5c5ffe13903 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -399,4 +399,12 @@ config JOYSTICK_N64
 	  Say Y here if you want enable support for the four
 	  built-in controller ports on the Nintendo 64 console.
 
+config JOYSTICK_SENSEHAT
+	tristate "Raspberry Pi Sense HAT joystick"
+	depends on GPIOLIB && INPUT && I2C
+	select MFD_SENSEHAT_CORE
+
+	help
+	  This is the joystick driver for the Raspberry Pi Sense HAT
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 5174b8aba2dd..39c8b5c6e5ae 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_JOYSTICK_N64)		+= n64joy.o
 obj-$(CONFIG_JOYSTICK_PSXPAD_SPI)	+= psxpad-spi.o
 obj-$(CONFIG_JOYSTICK_PXRC)		+= pxrc.o
 obj-$(CONFIG_JOYSTICK_QWIIC)		+= qwiic-joystick.o
+obj-$(CONFIG_JOYSTICK_SENSEHAT)         += sensehat-joystick.o
 obj-$(CONFIG_JOYSTICK_SIDEWINDER)	+= sidewinder.o
 obj-$(CONFIG_JOYSTICK_SPACEBALL)	+= spaceball.o
 obj-$(CONFIG_JOYSTICK_SPACEORB)		+= spaceorb.o
diff --git a/drivers/input/joystick/sensehat-joystick.c b/drivers/input/joystick/sensehat-joystick.c
new file mode 100644
index 000000000000..1f6bb09b4d1f
--- /dev/null
+++ b/drivers/input/joystick/sensehat-joystick.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Raspberry Pi Sense HAT joystick driver
+ * http://raspberrypi.org
+ *
+ * Copyright (C) 2015 Raspberry Pi
+ * Copyright (C) 2021 Charles Mirabile, Mwesigwa Guma, Joel Savitz
+ *
+ * Original Author: Serge Schneider
+ * Revised for upstream Linux by: Charles Mirabile, Mwesigwa Guma, Joel Savitz
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/sensehat.h>
+
+#define SENSEHAT_KEYS 0xF2
+
+static int sensehat_get_joystick_state(struct sensehat *sensehat);
+
+static unsigned char keymap[] = {
+	KEY_DOWN, KEY_RIGHT, KEY_UP, KEY_ENTER, KEY_LEFT,
+};
+
+static irqreturn_t sensehat_joystick_report(int n, void *cookie)
+{
+	int i;
+	static s32 prev_keys;
+	struct sensehat *sensehat = cookie;
+	struct sensehat_joystick *sensehat_joystick = &sensehat->joystick;
+	s32 keys = sensehat_get_joystick_state(sensehat);
+	s32 changes = keys ^ prev_keys;
+
+	prev_keys = keys;
+	for (i = 0; i < ARRAY_SIZE(keymap); ++i) {
+		if (changes & (1 << i)) {
+			input_report_key(sensehat_joystick->keys_dev, keymap[i],
+					 keys & (1 << i));
+		}
+	}
+	input_sync(sensehat_joystick->keys_dev);
+	return IRQ_HANDLED;
+}
+
+static int sensehat_joystick_probe(struct platform_device *pdev)
+{
+	int ret;
+	int i;
+	struct sensehat *sensehat = dev_get_drvdata(&pdev->dev);
+	struct sensehat_joystick *sensehat_joystick = &sensehat->joystick;
+
+	sensehat_joystick->keys_dev = devm_input_allocate_device(&pdev->dev);
+	if (!sensehat_joystick->keys_dev) {
+		dev_err(&pdev->dev, "Could not allocate input device.\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(keymap); i++) {
+		set_bit(keymap[i], sensehat_joystick->keys_dev->keybit);
+	}
+
+	sensehat_joystick->keys_dev->name = "Raspberry Pi Sense HAT Joystick";
+	sensehat_joystick->keys_dev->phys = "rpi-sense-joy/input0";
+	sensehat_joystick->keys_dev->id.bustype = BUS_I2C;
+	sensehat_joystick->keys_dev->evbit[0] =
+		BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	sensehat_joystick->keys_dev->keycode = keymap;
+	sensehat_joystick->keys_dev->keycodesize = sizeof(unsigned char);
+	sensehat_joystick->keys_dev->keycodemax = ARRAY_SIZE(keymap);
+
+	ret = input_register_device(sensehat_joystick->keys_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not register input device.\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, sensehat->i2c_client->irq,
+					NULL, sensehat_joystick_report,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"keys", sensehat);
+
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ request failed.\n");
+		return ret;
+	}
+	return 0;
+}
+
+int sensehat_get_joystick_state(struct sensehat *sensehat)
+{
+	unsigned int reg;
+	int ret = regmap_read(sensehat->regmap, SENSEHAT_KEYS, &reg);
+
+	return ret < 0 ? ret : reg;
+}
+
+static struct platform_device_id sensehat_joystick_device_id[] = {
+	{ .name = "sensehat-joystick" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, sensehat_joystick_device_id);
+
+static struct platform_driver sensehat_joystick_driver = {
+	.probe = sensehat_joystick_probe,
+	.driver = {
+		.name = "sensehat-joystick",
+	},
+};
+
+module_platform_driver(sensehat_joystick_driver);
+
+MODULE_DESCRIPTION("Raspberry Pi Sense HAT joystick driver");
+MODULE_AUTHOR("Serge Schneider <serge at raspberrypi.org>");
+MODULE_LICENSE("GPL");
-- 
2.31.1