[PATCH v4 2/7] uaccess-buffer: add core code
Marco Elver
elver at google.com
Fri Dec 10 04:39:59 PST 2021
On Thu, Dec 09, 2021 at 02:15PM -0800, Peter Collingbourne wrote:
> Add the core code to support uaccess logging. Subsequent patches will
> hook this up to the arch-specific kernel entry and exit code for
> certain architectures.
>
> Link: https://linux-review.googlesource.com/id/I6581765646501a5631b281d670903945ebadc57d
> Signed-off-by: Peter Collingbourne <pcc at google.com>
Few minor issues that may help readability; apart from that only 2
bigger question below which are related to changes in v4 below.
> ---
> v4:
> - add CONFIG_UACCESS_BUFFER
> - add kernel doc comments to uaccess-buffer.h
> - outline uaccess_buffer_set_descriptor_addr_addr
> - switch to using spin_lock_irqsave/spin_unlock_irqrestore during
> pre/post-exit-loop code because preemption is disabled at that point
> - set kend to NULL if krealloc failed
> - size_t -> unsigned long in copy_from_user_nolog signature
>
> v3:
> - performance optimizations for entry/exit code
> - don't use kcur == NULL to mean overflow
> - fix potential double free in clone()
> - don't allocate a new kernel-side uaccess buffer for each syscall
> - fix uaccess buffer leak on exit
> - fix some sparse warnings
>
> v2:
> - New interface that avoids multiple syscalls per real syscall and
> is arch-generic
> - Avoid logging uaccesses done by BPF programs
> - Add documentation
> - Split up into multiple patches
> - Various code moves, renames etc as requested by Marco
>
> arch/Kconfig | 13 +++
> fs/exec.c | 3 +
> include/linux/instrumented-uaccess.h | 6 +-
> include/linux/sched.h | 5 +
> include/linux/uaccess-buffer-info.h | 46 ++++++++
> include/linux/uaccess-buffer.h | 152 +++++++++++++++++++++++++++
> include/uapi/linux/prctl.h | 3 +
> include/uapi/linux/uaccess-buffer.h | 27 +++++
> kernel/Makefile | 1 +
> kernel/bpf/helpers.c | 7 +-
> kernel/fork.c | 4 +
> kernel/signal.c | 9 +-
> kernel/sys.c | 6 ++
> kernel/uaccess-buffer.c | 145 +++++++++++++++++++++++++
> 14 files changed, 422 insertions(+), 5 deletions(-)
> create mode 100644 include/linux/uaccess-buffer-info.h
> create mode 100644 include/linux/uaccess-buffer.h
> create mode 100644 include/uapi/linux/uaccess-buffer.h
> create mode 100644 kernel/uaccess-buffer.c
>
> diff --git a/arch/Kconfig b/arch/Kconfig
> index d3c4ab249e9c..17819f53ea80 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -1312,6 +1312,19 @@ config ARCH_HAS_PARANOID_L1D_FLUSH
> config DYNAMIC_SIGFRAME
> bool
>
> +config HAVE_ARCH_UACCESS_BUFFER
> + bool
> + help
> + Select if the architecture's syscall entry/exit code supports uaccess buffers.
> +
> +config UACCESS_BUFFER
> + bool "Uaccess logging" if EXPERT
I think this is fine, based on perf data you provided. I think whether
or not to enable by default is probably something that needs to be
backed up with more data though, ideally with performance numbers added
to the commit description.
It had come up before, so I think clarifying this will probably address
one of the 2 major questions (the other being if it can be used to leak
sensitive data).
This is the first instance of spelling uaccess as "Uaccess" in the
kernel. I think this should just be spelled out as "User access". Here
and in documentation.
> + default y
> + depends on HAVE_ARCH_UACCESS_BUFFER
> + help
> + Select to enable support for uaccess logging
> + (see Documentation/admin-guide/uaccess-logging.rst).
> +
> source "kernel/gcov/Kconfig"
>
> source "scripts/gcc-plugins/Kconfig"
> diff --git a/fs/exec.c b/fs/exec.c
> index 537d92c41105..c9975e790f30 100644
> --- a/fs/exec.c
> +++ b/fs/exec.c
> @@ -65,6 +65,7 @@
> #include <linux/vmalloc.h>
> #include <linux/io_uring.h>
> #include <linux/syscall_user_dispatch.h>
> +#include <linux/uaccess-buffer.h>
>
> #include <linux/uaccess.h>
> #include <asm/mmu_context.h>
> @@ -1313,6 +1314,8 @@ int begin_new_exec(struct linux_binprm * bprm)
> me->personality &= ~bprm->per_clear;
>
> clear_syscall_work_syscall_user_dispatch(me);
> + uaccess_buffer_set_descriptor_addr_addr(0);
> + uaccess_buffer_free(current);
>
> /*
> * We have to apply CLOEXEC before we change whether the process is
> diff --git a/include/linux/instrumented-uaccess.h b/include/linux/instrumented-uaccess.h
> index ece549088e50..b967f4436d15 100644
> --- a/include/linux/instrumented-uaccess.h
> +++ b/include/linux/instrumented-uaccess.h
> @@ -2,7 +2,8 @@
>
> /*
> * This header provides generic wrappers for memory access instrumentation for
> - * uaccess routines that the compiler cannot emit for: KASAN, KCSAN.
> + * uaccess routines that the compiler cannot emit for: KASAN, KCSAN,
> + * uaccess buffers.
> */
> #ifndef _LINUX_INSTRUMENTED_UACCESS_H
> #define _LINUX_INSTRUMENTED_UACCESS_H
> @@ -11,6 +12,7 @@
> #include <linux/kasan-checks.h>
> #include <linux/kcsan-checks.h>
> #include <linux/types.h>
> +#include <linux/uaccess-buffer.h>
>
> /**
> * instrument_copy_to_user - instrument reads of copy_to_user
> @@ -27,6 +29,7 @@ instrument_copy_to_user(void __user *to, const void *from, unsigned long n)
> {
> kasan_check_read(from, n);
> kcsan_check_read(from, n);
> + uaccess_buffer_log_write(to, n);
> }
>
> /**
> @@ -44,6 +47,7 @@ instrument_copy_from_user(const void *to, const void __user *from, unsigned long
> {
> kasan_check_write(to, n);
> kcsan_check_write(to, n);
> + uaccess_buffer_log_read(from, n);
> }
>
> #endif /* _LINUX_INSTRUMENTED_UACCESS_H */
> diff --git a/include/linux/sched.h b/include/linux/sched.h
> index 78c351e35fec..96014dd2702e 100644
> --- a/include/linux/sched.h
> +++ b/include/linux/sched.h
> @@ -34,6 +34,7 @@
> #include <linux/rseq.h>
> #include <linux/seqlock.h>
> #include <linux/kcsan.h>
> +#include <linux/uaccess-buffer-info.h>
> #include <asm/kmap_size.h>
>
> /* task_struct member predeclarations (sorted alphabetically): */
> @@ -1484,6 +1485,10 @@ struct task_struct {
> struct callback_head l1d_flush_kill;
> #endif
>
> +#ifdef CONFIG_UACCESS_BUFFER
> + struct uaccess_buffer_info uaccess_buffer;
> +#endif
> +
> /*
> * New fields for task_struct should be added above here, so that
> * they are included in the randomized portion of task_struct.
> diff --git a/include/linux/uaccess-buffer-info.h b/include/linux/uaccess-buffer-info.h
> new file mode 100644
> index 000000000000..46e2b1a4a20f
> --- /dev/null
> +++ b/include/linux/uaccess-buffer-info.h
> @@ -0,0 +1,46 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _LINUX_UACCESS_BUFFER_INFO_H
> +#define _LINUX_UACCESS_BUFFER_INFO_H
> +
> +#ifdef CONFIG_UACCESS_BUFFER
> +
> +struct uaccess_buffer_info {
> + /*
> + * The pointer to pointer to struct uaccess_descriptor. This is the
> + * value controlled by prctl(PR_SET_UACCESS_DESCRIPTOR_ADDR_ADDR).
> + */
> + struct uaccess_descriptor __user *__user *desc_ptr_ptr;
> +
> + /*
> + * The pointer to struct uaccess_descriptor read at syscall entry time.
> + */
> + struct uaccess_descriptor __user *desc_ptr;
> +
> + /*
> + * A pointer to the kernel's temporary copy of the uaccess log for the
> + * current syscall. We log to a kernel buffer in order to avoid leaking
> + * timing information to userspace.
> + */
> + struct uaccess_buffer_entry *kbegin;
> +
> + /*
> + * The position of the next uaccess buffer entry for the current
> + * syscall, or NULL if we are not logging the current syscall.
> + */
> + struct uaccess_buffer_entry *kcur;
> +
> + /*
> + * A pointer to the end of the kernel's uaccess log.
> + */
> + struct uaccess_buffer_entry *kend;
> +
> + /*
> + * The pointer to the userspace uaccess log, as read from the
> + * struct uaccess_descriptor.
> + */
> + struct uaccess_buffer_entry __user *ubegin;
> +};
> +
> +#endif
> +
> +#endif /* _LINUX_UACCESS_BUFFER_INFO_H */
> diff --git a/include/linux/uaccess-buffer.h b/include/linux/uaccess-buffer.h
> new file mode 100644
> index 000000000000..2e9b4010fb59
> --- /dev/null
> +++ b/include/linux/uaccess-buffer.h
> @@ -0,0 +1,152 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _LINUX_UACCESS_BUFFER_H
> +#define _LINUX_UACCESS_BUFFER_H
> +
> +#include <linux/sched.h>
> +#include <uapi/linux/uaccess-buffer.h>
> +
> +#include <asm-generic/errno-base.h>
> +
> +#ifdef CONFIG_UACCESS_BUFFER
> +
> +/*
> + * uaccess_buffer_maybe_blocked - returns whether a task potentially has signals
> + * blocked due to uaccess logging
> + * @tsk: the task.
> + */
Kernel-doc comments need to start with "/**". See template:
https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#function-documentation
> +static inline bool uaccess_buffer_maybe_blocked(struct task_struct *tsk)
> +{
> + return test_task_syscall_work(tsk, UACCESS_BUFFER_ENTRY);
> +}
> +
> +void __uaccess_buffer_syscall_entry(void);
> +/*
> + * uaccess_buffer_syscall_entry - hook to be run before syscall entry
> + */
> +static inline void uaccess_buffer_syscall_entry(void)
> +{
> + __uaccess_buffer_syscall_entry();
> +}
> +
> +void __uaccess_buffer_syscall_exit(void);
> +/*
> + * uaccess_buffer_syscall_exit - hook to be run after syscall exit
> + */
> +static inline void uaccess_buffer_syscall_exit(void)
> +{
> + __uaccess_buffer_syscall_exit();
> +}
> +
> +bool __uaccess_buffer_pre_exit_loop(void);
> +/*
> + * uaccess_buffer_pre_exit_loop - hook to be run immediately before the
> + * pre-kernel-exit loop that handles signals, tracing etc. Returns a bool to
> + * be passed to uaccess_buffer_post_exit_loop.
> + */
> +static inline bool uaccess_buffer_pre_exit_loop(void)
> +{
> + if (!test_syscall_work(UACCESS_BUFFER_ENTRY))
> + return false;
> + return __uaccess_buffer_pre_exit_loop();
> +}
> +
> +void __uaccess_buffer_post_exit_loop(void);
> +/*
> + * uaccess_buffer_post_exit_loop - hook to be run immediately after the
> + * pre-kernel-exit loop that handles signals, tracing etc.
> + * @pending: the bool returned from uaccess_buffer_pre_exit_loop.
> + */
> +static inline void uaccess_buffer_post_exit_loop(bool pending)
> +{
> + if (pending)
> + __uaccess_buffer_post_exit_loop();
> +}
> +
> +/*
> + * uaccess_buffer_set_descriptor_addr_addr - implements
> + * prctl(PR_SET_UACCESS_DESCRIPTOR_ADDR_ADDR).
> + */
> +int uaccess_buffer_set_descriptor_addr_addr(unsigned long addr);
> +
> +/*
> + * copy_from_user_nolog - a variant of copy_from_user that avoids uaccess
> + * logging. This is useful in special cases, such as when the kernel overreads a
> + * buffer.
> + * @to: the pointer to kernel memory.
> + * @from: the pointer to user memory.
> + * @len: the number of bytes to copy.
> + */
> +unsigned long copy_from_user_nolog(void *to, const void __user *from,
> + unsigned long len);
> +
> +/*
> + * uaccess_buffer_free - free the task's kernel-side uaccess buffer and arrange
> + * for uaccess logging to be cancelled for the current syscall
> + * @tsk: the task.
> + */
> +void uaccess_buffer_free(struct task_struct *tsk);
> +
> +void __uaccess_buffer_log_read(const void __user *from, unsigned long n);
> +/*
> + * uaccess_buffer_log_read - log a read access
> + * @from: the address of the access.
> + * @n: the number of bytes.
> + */
> +static inline void uaccess_buffer_log_read(const void __user *from, unsigned long n)
> +{
> + if (unlikely(test_syscall_work(UACCESS_BUFFER_EXIT)))
> + __uaccess_buffer_log_read(from, n);
> +}
> +
> +void __uaccess_buffer_log_write(void __user *to, unsigned long n);
> +/*
> + * uaccess_buffer_log_write - log a write access
> + * @to: the address of the access.
> + * @n: the number of bytes.
> + */
> +static inline void uaccess_buffer_log_write(void __user *to, unsigned long n)
> +{
> + if (unlikely(test_syscall_work(UACCESS_BUFFER_EXIT)))
> + __uaccess_buffer_log_write(to, n);
> +}
> +
> +#else
> +
> +static inline bool uaccess_buffer_maybe_blocked(struct task_struct *tsk)
> +{
> + return false;
> +}
> +static inline void uaccess_buffer_syscall_entry(void)
> +{
> +}
> +static inline void uaccess_buffer_syscall_exit(void)
> +{
> +}
> +static inline bool uaccess_buffer_pre_exit_loop(void)
> +{
> + return false;
> +}
> +static inline void uaccess_buffer_post_exit_loop(bool pending)
> +{
> +}
> +static inline int uaccess_buffer_set_descriptor_addr_addr(unsigned long addr)
> +{
> + return -EINVAL;
> +}
> +static inline void uaccess_buffer_free(struct task_struct *tsk)
> +{
> +}
> +
> +#define copy_from_user_nolog copy_from_user
> +
> +static inline void uaccess_buffer_log_read(const void __user *from,
> + unsigned long n)
> +{
> +}
> +static inline void uaccess_buffer_log_write(void __user *to, unsigned long n)
> +{
> +}
> +
> +#endif
> +
> +#endif /* _LINUX_UACCESS_BUFFER_H */
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index bb73e9a0b24f..74b37469c7b3 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -272,4 +272,7 @@ struct prctl_mm_map {
> # define PR_SCHED_CORE_SCOPE_THREAD_GROUP 1
> # define PR_SCHED_CORE_SCOPE_PROCESS_GROUP 2
>
> +/* Configure uaccess logging feature */
> +#define PR_SET_UACCESS_DESCRIPTOR_ADDR_ADDR 63
> +
> #endif /* _LINUX_PRCTL_H */
> diff --git a/include/uapi/linux/uaccess-buffer.h b/include/uapi/linux/uaccess-buffer.h
> new file mode 100644
> index 000000000000..bf10f7c78857
> --- /dev/null
> +++ b/include/uapi/linux/uaccess-buffer.h
> @@ -0,0 +1,27 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +#ifndef _UAPI_LINUX_UACCESS_BUFFER_H
> +#define _UAPI_LINUX_UACCESS_BUFFER_H
> +
> +#include <linux/types.h>
> +
> +/* Location of the uaccess log. */
> +struct uaccess_descriptor {
> + /* Address of the uaccess_buffer_entry array. */
> + __u64 addr;
> + /* Size of the uaccess_buffer_entry array in number of elements. */
> + __u64 size;
> +};
> +
> +/* Format of the entries in the uaccess log. */
> +struct uaccess_buffer_entry {
> + /* Address being accessed. */
> + __u64 addr;
> + /* Number of bytes that were accessed. */
> + __u64 size;
> + /* UACCESS_BUFFER_* flags. */
> + __u64 flags;
> +};
> +
> +#define UACCESS_BUFFER_FLAG_WRITE 1 /* access was a write */
> +
> +#endif /* _UAPI_LINUX_UACCESS_BUFFER_H */
> diff --git a/kernel/Makefile b/kernel/Makefile
> index 186c49582f45..e5f6c56696a2 100644
> --- a/kernel/Makefile
> +++ b/kernel/Makefile
> @@ -114,6 +114,7 @@ obj-$(CONFIG_KCSAN) += kcsan/
> obj-$(CONFIG_SHADOW_CALL_STACK) += scs.o
> obj-$(CONFIG_HAVE_STATIC_CALL_INLINE) += static_call.o
> obj-$(CONFIG_CFI_CLANG) += cfi.o
> +obj-$(CONFIG_UACCESS_BUFFER) += uaccess-buffer.o
>
> obj-$(CONFIG_PERF_EVENTS) += events/
>
> diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
> index 649f07623df6..ab6520a633ef 100644
> --- a/kernel/bpf/helpers.c
> +++ b/kernel/bpf/helpers.c
> @@ -15,6 +15,7 @@
> #include <linux/pid_namespace.h>
> #include <linux/proc_ns.h>
> #include <linux/security.h>
> +#include <linux/uaccess-buffer.h>
>
> #include "../../lib/kstrtox.h"
>
> @@ -637,7 +638,11 @@ const struct bpf_func_proto bpf_event_output_data_proto = {
> BPF_CALL_3(bpf_copy_from_user, void *, dst, u32, size,
> const void __user *, user_ptr)
> {
> - int ret = copy_from_user(dst, user_ptr, size);
> + /*
> + * Avoid logging uaccesses here as the BPF program may not be following
> + * the uaccess log rules.
> + */
> + int ret = copy_from_user_nolog(dst, user_ptr, size);
>
Like the fs change, shouldn't this also be in its own patch?
> if (unlikely(ret)) {
> memset(dst, 0, size);
> diff --git a/kernel/fork.c b/kernel/fork.c
> index 3244cc56b697..8be2ca528a65 100644
> --- a/kernel/fork.c
> +++ b/kernel/fork.c
> @@ -96,6 +96,7 @@
> #include <linux/scs.h>
> #include <linux/io_uring.h>
> #include <linux/bpf.h>
> +#include <linux/uaccess-buffer.h>
>
> #include <asm/pgalloc.h>
> #include <linux/uaccess.h>
> @@ -754,6 +755,7 @@ void __put_task_struct(struct task_struct *tsk)
> delayacct_tsk_free(tsk);
> put_signal_struct(tsk->signal);
> sched_core_free(tsk);
> + uaccess_buffer_free(tsk);
>
> if (!profile_handoff_task(tsk))
> free_task(tsk);
> @@ -890,6 +892,8 @@ static struct task_struct *dup_task_struct(struct task_struct *orig, int node)
> if (memcg_charge_kernel_stack(tsk))
> goto free_stack;
>
> + uaccess_buffer_free(orig);
> +
> stack_vm_area = task_stack_vm_area(tsk);
>
> err = arch_dup_task_struct(tsk, orig);
> diff --git a/kernel/signal.c b/kernel/signal.c
> index a629b11bf3e0..b85d7d4844f6 100644
> --- a/kernel/signal.c
> +++ b/kernel/signal.c
> @@ -45,6 +45,7 @@
> #include <linux/posix-timers.h>
> #include <linux/cgroup.h>
> #include <linux/audit.h>
> +#include <linux/uaccess-buffer.h>
>
> #define CREATE_TRACE_POINTS
> #include <trace/events/signal.h>
> @@ -1031,7 +1032,8 @@ static void complete_signal(int sig, struct task_struct *p, enum pid_type type)
> if (sig_fatal(p, sig) &&
> !(signal->flags & SIGNAL_GROUP_EXIT) &&
> !sigismember(&t->real_blocked, sig) &&
> - (sig == SIGKILL || !p->ptrace)) {
> + (sig == SIGKILL ||
> + !(p->ptrace || uaccess_buffer_maybe_blocked(p)))) {
> /*
> * This signal will be fatal to the whole group.
> */
> @@ -3027,6 +3029,7 @@ void set_current_blocked(sigset_t *newset)
> void __set_current_blocked(const sigset_t *newset)
> {
> struct task_struct *tsk = current;
> + unsigned long flags;
>
> /*
> * In case the signal mask hasn't changed, there is nothing we need
> @@ -3035,9 +3038,9 @@ void __set_current_blocked(const sigset_t *newset)
> if (sigequalsets(&tsk->blocked, newset))
> return;
>
> - spin_lock_irq(&tsk->sighand->siglock);
> + spin_lock_irqsave(&tsk->sighand->siglock, flags);
> __set_task_blocked(tsk, newset);
> - spin_unlock_irq(&tsk->sighand->siglock);
> + spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
> }
You say that when you call this in the pre/post-exit-loop that
preemption is disabled.
Is only preemption (via preempt_disable()) disabled or are interrupts
disabled?
If the latter, is it even valid to call set_current_blocked()? As-is,
one of its expected pre-conditions is that interrupts are enabled. Is
that a redundant expectation, which you are suggesting with this change?
> /*
> diff --git a/kernel/sys.c b/kernel/sys.c
> index 8fdac0d90504..c71a9a9c0f68 100644
> --- a/kernel/sys.c
> +++ b/kernel/sys.c
> @@ -42,6 +42,7 @@
> #include <linux/version.h>
> #include <linux/ctype.h>
> #include <linux/syscall_user_dispatch.h>
> +#include <linux/uaccess-buffer.h>
>
> #include <linux/compat.h>
> #include <linux/syscalls.h>
> @@ -2530,6 +2531,11 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
> error = sched_core_share_pid(arg2, arg3, arg4, arg5);
> break;
> #endif
> + case PR_SET_UACCESS_DESCRIPTOR_ADDR_ADDR:
> + if (arg3 || arg4 || arg5)
> + return -EINVAL;
> + error = uaccess_buffer_set_descriptor_addr_addr(arg2);
> + break;
> default:
> error = -EINVAL;
> break;
> diff --git a/kernel/uaccess-buffer.c b/kernel/uaccess-buffer.c
> new file mode 100644
> index 000000000000..d3129244b7d9
> --- /dev/null
> +++ b/kernel/uaccess-buffer.c
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Support for uaccess logging via uaccess buffers.
> + *
> + * Copyright (C) 2021, Google LLC.
> + */
> +
> +#include <linux/compat.h>
> +#include <linux/mm.h>
> +#include <linux/prctl.h>
> +#include <linux/ptrace.h>
> +#include <linux/sched.h>
> +#include <linux/signal.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +#include <linux/uaccess-buffer.h>
> +
> +int uaccess_buffer_set_descriptor_addr_addr(unsigned long addr)
> +{
> + current->uaccess_buffer.desc_ptr_ptr =
> + (struct uaccess_descriptor __user * __user *)addr;
> + if (addr)
> + set_syscall_work(UACCESS_BUFFER_ENTRY);
> + else
> + clear_syscall_work(UACCESS_BUFFER_ENTRY);
> + return 0;
> +}
> +
> +static void uaccess_buffer_log(unsigned long addr, unsigned long size,
> + unsigned long flags)
> +{
> + struct uaccess_buffer_info *buf = ¤t->uaccess_buffer;
> + struct uaccess_buffer_entry *entry = buf->kcur;
> +
> + if (entry == buf->kend || unlikely(uaccess_kernel()))
> + return;
> + entry->addr = addr;
> + entry->size = size;
> + entry->flags = flags;
> +
> + ++buf->kcur;
> +}
> +
> +void __uaccess_buffer_log_read(const void __user *from, unsigned long n)
> +{
> + uaccess_buffer_log((unsigned long)from, n, 0);
> +}
> +EXPORT_SYMBOL(__uaccess_buffer_log_read);
> +
> +void __uaccess_buffer_log_write(void __user *to, unsigned long n)
> +{
> + uaccess_buffer_log((unsigned long)to, n, UACCESS_BUFFER_FLAG_WRITE);
> +}
> +EXPORT_SYMBOL(__uaccess_buffer_log_write);
> +
> +bool __uaccess_buffer_pre_exit_loop(void)
> +{
> + struct uaccess_buffer_info *buf = ¤t->uaccess_buffer;
> + struct uaccess_descriptor __user *desc_ptr;
> + sigset_t tmp_mask;
> +
> + if (get_user(desc_ptr, buf->desc_ptr_ptr) || !desc_ptr)
> + return false;
> +
> + current->real_blocked = current->blocked;
> + sigfillset(&tmp_mask);
> + set_current_blocked(&tmp_mask);
> + return true;
> +}
> +
> +void __uaccess_buffer_post_exit_loop(void)
> +{
> + unsigned long flags;
> +
> + spin_lock_irqsave(¤t->sighand->siglock, flags);
> + current->blocked = current->real_blocked;
> + recalc_sigpending();
> + spin_unlock_irqrestore(¤t->sighand->siglock, flags);
> +}
> +
> +void uaccess_buffer_free(struct task_struct *tsk)
> +{
> + struct uaccess_buffer_info *buf = &tsk->uaccess_buffer;
> +
> + kfree(buf->kbegin);
> + clear_syscall_work(UACCESS_BUFFER_EXIT);
> + buf->kbegin = buf->kcur = buf->kend = NULL;
> +}
> +
> +void __uaccess_buffer_syscall_entry(void)
> +{
> + struct uaccess_buffer_info *buf = ¤t->uaccess_buffer;
> + struct uaccess_descriptor desc;
> +
> + if (get_user(buf->desc_ptr, buf->desc_ptr_ptr) || !buf->desc_ptr ||
> + put_user(0, buf->desc_ptr_ptr) ||
> + copy_from_user(&desc, buf->desc_ptr, sizeof(desc)))
> + return;
> +
> + if (desc.size > 1024)
> + desc.size = 1024;
> +
> + if (buf->kend - buf->kbegin != desc.size)
> + buf->kbegin =
> + krealloc_array(buf->kbegin, desc.size,
> + sizeof(struct uaccess_buffer_entry),
> + GFP_KERNEL);
The kernel is fine with 100 cols per line, if it helps readability. And
I think all cases where a "val =" is broken after the = fall into that
category. Here and everywhere else.
> + if (!buf->kbegin) {
> + buf->kend = NULL;
> + return;
> + }
> +
> + set_syscall_work(UACCESS_BUFFER_EXIT);
> + buf->kcur = buf->kbegin;
> + buf->kend = buf->kbegin + desc.size;
> + buf->ubegin =
> + (struct uaccess_buffer_entry __user *)(unsigned long)desc.addr;
> +}
> +
> +void __uaccess_buffer_syscall_exit(void)
> +{
> + struct uaccess_buffer_info *buf = ¤t->uaccess_buffer;
> + u64 num_entries = buf->kcur - buf->kbegin;
> + struct uaccess_descriptor desc;
> +
> + clear_syscall_work(UACCESS_BUFFER_EXIT);
> + desc.addr = (u64)(unsigned long)(buf->ubegin + num_entries);
> + desc.size = buf->kend - buf->kcur;
> + buf->kcur = NULL;
> + if (copy_to_user(buf->ubegin, buf->kbegin,
> + num_entries * sizeof(struct uaccess_buffer_entry)) == 0)
> + (void)copy_to_user(buf->desc_ptr, &desc, sizeof(desc));
> +}
> +
> +unsigned long copy_from_user_nolog(void *to, const void __user *from,
> + unsigned long len)
> +{
> + size_t retval;
> +
> + clear_syscall_work(UACCESS_BUFFER_EXIT);
> + retval = copy_from_user(to, from, len);
> + if (current->uaccess_buffer.kcur)
> + set_syscall_work(UACCESS_BUFFER_EXIT);
> + return retval;
> +}
> --
> 2.34.1.173.g76aa8bc2d0-goog
>
More information about the linux-arm-kernel
mailing list