[PATCH v6 7/7] drm/mediatek: Add mt8195 DisplayPort driver

[AngeloGioacchino Del Regno]

Il 10/11/21 14:06, Guillaume Ranquet ha scritto:
> From: Markus Schneider-Pargmann <msp at baylibre.com>
> 
> This patch adds a DisplayPort driver for the Mediatek mt8195 SoC and a
> according phy driver mediatek-dp-phy.
> 
> It supports both functional units on the mt8195, the embedded
> DisplayPort as well as the external DisplayPort units. It offers
> hot-plug-detection, audio up to 8 channels, and DisplayPort 1.4 with up
> to 4 lanes.
> 
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so that
> both can work with the same register range. The phy driver sets device
> data that is read by the parent to get the phy device that can be used
> to control the phy properties.
> 
> This driver is based on an initial version by
> Jason-JH.Lin <jason-jh.lin at mediatek.com>.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> Reported-by: kernel test robot <lkp at intel.com>

Hello Markus, Guillaume,

there is a critical issue with this patch. Please check below.

> ---
>   drivers/gpu/drm/drm_edid.c              |    2 +-
>   drivers/gpu/drm/mediatek/Kconfig        |    7 +
>   drivers/gpu/drm/mediatek/Makefile       |    2 +
>   drivers/gpu/drm/mediatek/mtk_dp.c       | 3094 +++++++++++++++++++++++
>   drivers/gpu/drm/mediatek/mtk_dp_reg.h   |  568 +++++
>   drivers/gpu/drm/mediatek/mtk_dpi.c      |  111 +-
>   drivers/gpu/drm/mediatek/mtk_dpi_regs.h |   26 +
>   drivers/gpu/drm/mediatek/mtk_drm_drv.c  |    1 +
>   drivers/gpu/drm/mediatek/mtk_drm_drv.h  |    1 +
>   9 files changed, 3799 insertions(+), 13 deletions(-)
>   create mode 100644 drivers/gpu/drm/mediatek/mtk_dp.c
>   create mode 100644 drivers/gpu/drm/mediatek/mtk_dp_reg.h
> 

<snip>

> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 384074f69111b..e6e88e3cd811d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c

<snip>

> @@ -979,6 +1051,16 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>   		return ret;
>   	}
>   
> +	dpi->dpi_ck_cg = devm_clk_get(dev, "ck_cg");

mtk_dpi is used on MT2701, MT7183, MT8183, MT8192, but these platforms haven't
got any "ck_cg" clock defined in their device-trees (regardless of whether these
can support adding this clock or not, any code change shall be retro-compatible
hence not breaking compatibility/functionality with older device-trees).

Reminding that:
- mediatek-drm uses the component framework
- mtk_drm_drv is the component master
- mtk_drm_drv bind() won't be called unless all of the components added with
   match aren't calling component_add()

... this change not only breaks DisplayPort support for *all* of the
aforementioned SoCs, but also makes the entire mediatek-drm to not finish
probing, producing a global breakage that also includes DSI and the entire
stack of components of that master (so, no display on all of them).

To avoid breaking any SoC that's not MT8195, please use devm_clk_get_optional()
here in the next version.

Thanks,
- Angelo