[PATCH net-next 4/5] net: phylink: use legacy_pre_march2020

Russell King (Oracle) rmk+kernel at armlinux.org.uk
Thu Dec 9 05:11:48 PST 2021


Use the legacy flag to indicate whether we should operate in legacy
mode. This allows us to stop using the presence of a PCS as an
indicator to the age of the phylink user, and make PCS presence
optional.

Legacy mode involves:
1) calling mac_config() whenever the link comes up
2) calling mac_config() whenever the inband advertisement changes,
   possibly followed by a call to mac_an_restart()
3) making use of mac_an_restart()
4) making use of mac_pcs_get_state()

All the above functionality was moved to a seperate "PCS" block of
operations in March 2020.

Update the documents to indicate that the differences that this flag
makes.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
Resent with the correct cover-letter message-ID.

 drivers/net/phy/phylink.c | 12 ++++++------
 include/linux/phylink.h   | 17 +++++++++++++++++
 2 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 8e3861f09b4f..e47f2baf4b07 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -742,7 +742,7 @@ static void phylink_mac_pcs_an_restart(struct phylink *pl)
 	    phylink_autoneg_inband(pl->cur_link_an_mode)) {
 		if (pl->pcs_ops)
 			pl->pcs_ops->pcs_an_restart(pl->pcs);
-		else
+		else if (pl->config->legacy_pre_march2020)
 			pl->mac_ops->mac_an_restart(pl->config);
 	}
 }
@@ -803,7 +803,7 @@ static int phylink_change_inband_advert(struct phylink *pl)
 	if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state))
 		return 0;
 
-	if (!pl->pcs_ops) {
+	if (!pl->pcs_ops && pl->config->legacy_pre_march2020) {
 		/* Legacy method */
 		phylink_mac_config(pl, &pl->link_config);
 		phylink_mac_pcs_an_restart(pl);
@@ -854,7 +854,8 @@ static void phylink_mac_pcs_get_state(struct phylink *pl,
 
 	if (pl->pcs_ops)
 		pl->pcs_ops->pcs_get_state(pl->pcs, state);
-	else if (pl->mac_ops->mac_pcs_get_state)
+	else if (pl->mac_ops->mac_pcs_get_state &&
+		 pl->config->legacy_pre_march2020)
 		pl->mac_ops->mac_pcs_get_state(pl->config, state);
 	else
 		state->link = 0;
@@ -1048,12 +1049,11 @@ static void phylink_resolve(struct work_struct *w)
 			}
 			phylink_major_config(pl, false, &link_state);
 			pl->link_config.interface = link_state.interface;
-		} else if (!pl->pcs_ops) {
+		} else if (!pl->pcs_ops && pl->config->legacy_pre_march2020) {
 			/* The interface remains unchanged, only the speed,
 			 * duplex or pause settings have changed. Call the
 			 * old mac_config() method to configure the MAC/PCS
-			 * only if we do not have a PCS installed (an
-			 * unconverted user.)
+			 * only if we do not have a legacy MAC driver.
 			 */
 			phylink_mac_config(pl, &link_state);
 		}
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index d005b8e36048..a2f266cc3442 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -190,6 +190,10 @@ void validate(struct phylink_config *config, unsigned long *supported,
  * negotiation completion state in @state->an_complete, and link up state
  * in @state->link. If possible, @state->lp_advertising should also be
  * populated.
+ *
+ * Note: This is a legacy method. This function will not be called unless
+ * legacy_pre_march2020 is set in &struct phylink_config and there is no
+ * PCS attached.
  */
 void mac_pcs_get_state(struct phylink_config *config,
 		       struct phylink_link_state *state);
@@ -230,6 +234,15 @@ int mac_prepare(struct phylink_config *config, unsigned int mode,
  * guaranteed to be correct, and so any mac_config() implementation must
  * never reference these fields.
  *
+ * Note: For legacy March 2020 drivers (drivers with legacy_pre_march2020 set
+ * in their &phylnk_config and which don't have a PCS), this function will be
+ * called on each link up event, and to also change the in-band advert. For
+ * non-legacy drivers, it will only be called to reconfigure the MAC for a
+ * "major" change in e.g. interface mode. It will not be called for changes
+ * in speed, duplex or pause modes or to change the in-band advertisement.
+ * In any case, it is strongly preferred that speed, duplex and pause settings
+ * are handled in the mac_link_up() method and not in this method.
+ *
  * (this requires a rewrite - please refer to mac_link_up() for situations
  *  where the PCS and MAC are not tightly integrated.)
  *
@@ -314,6 +327,10 @@ int mac_finish(struct phylink_config *config, unsigned int mode,
 /**
  * mac_an_restart() - restart 802.3z BaseX autonegotiation
  * @config: a pointer to a &struct phylink_config.
+ *
+ * Note: This is a legacy method. This function will not be called unless
+ * legacy_pre_march2020 is set in &struct phylink_config and there is no
+ * PCS attached.
  */
 void mac_an_restart(struct phylink_config *config);
 
-- 
2.30.2




More information about the linux-arm-kernel mailing list