[PATCH v3 5/8] dt-bindings: net: Convert AMAC to YAML

[Rob Herring]

On Mon, Dec 06, 2021 at 10:00:46AM -0800, Florian Fainelli wrote:
> Convert the Broadcom AMAC Device Tree binding to YAML to help with
> schema and dtbs checking.
> 
> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
> ---
>  .../devicetree/bindings/net/brcm,amac.txt     | 30 -------
>  .../devicetree/bindings/net/brcm,amac.yaml    | 88 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 89 insertions(+), 31 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/brcm,amac.txt
>  create mode 100644 Documentation/devicetree/bindings/net/brcm,amac.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
> deleted file mode 100644
> index 0120ebe93262..000000000000
> --- a/Documentation/devicetree/bindings/net/brcm,amac.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -Broadcom AMAC Ethernet Controller Device Tree Bindings
> --------------------------------------------------------------
> -
> -Required properties:
> - - compatible:	"brcm,amac"
> -		"brcm,nsp-amac"
> -		"brcm,ns2-amac"
> - - reg:		Address and length of the register set for the device. It
> -		contains the information of registers in the same order as
> -		described by reg-names
> - - reg-names:	Names of the registers.
> -		"amac_base":	Address and length of the GMAC registers
> -		"idm_base":	Address and length of the GMAC IDM registers
> -				(required for NSP and Northstar2)
> -		"nicpm_base":	Address and length of the NIC Port Manager
> -				registers (required for Northstar2)
> - - interrupts:	Interrupt number
> -
> -The MAC address will be determined using the optional properties
> -defined in ethernet.txt.
> -
> -Examples:
> -
> -amac0: ethernet at 18022000 {
> -	compatible = "brcm,nsp-amac";
> -	reg = <0x18022000 0x1000>,
> -	      <0x18110000 0x1000>;
> -	reg-names = "amac_base", "idm_base";
> -	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
> -};
> diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml
> new file mode 100644
> index 000000000000..d9de68aba7d3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/brcm,amac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom AMAC Ethernet Controller Device Tree Bindings
> +
> +maintainers:
> +  - Florian Fainelli <f.fainelli at gmail.com>
> +
> +allOf:
> +  - $ref: "ethernet-controller.yaml#"
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - brcm,amac
> +    then:
> +      properties:
> +        reg:
> +          minItems: 1
> +          maxItems: 2
> +        reg-names:
> +          minItems: 1
> +          maxItems: 2
> +          items:
> +            - const: amac_base
> +            - const: idm_base
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - brcm,nsp-amac
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2
> +          maxItems: 2
> +        reg-names:
> +          items:
> +            - const: amac_base
> +            - const: idm_base
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - brcm,ns2-amac
> +    then:
> +      properties:

> +        reg:
> +          minItems: 3
> +          maxItems: 3
> +        reg-names:
> +          items:
> +            - const: amac_base
> +            - const: idm_base
> +            - const: nicpm_base

Move this to the main section so that the names are only defined once. 
Then here you can just set the number of items.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - brcm,amac
> +      - brcm,nsp-amac
> +      - brcm,ns2-amac
> +
> +  interrupts:
> +    maxItems: 1
> +
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +   #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +   amac0: ethernet at 18022000 {
> +      compatible = "brcm,nsp-amac";
> +      reg = <0x18022000 0x1000>,
> +            <0x18110000 0x1000>;
> +      reg-names = "amac_base", "idm_base";
> +      interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
> +   };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5e1064c23f41..404e76d625f1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3861,7 +3861,7 @@ M:	Rafał Miłecki <rafal at milecki.pl>
>  M:	bcm-kernel-feedback-list at broadcom.com
>  L:	netdev at vger.kernel.org
>  S:	Maintained
> -F:	Documentation/devicetree/bindings/net/brcm,amac.txt
> +F:	Documentation/devicetree/bindings/net/brcm,amac.yaml
>  F:	drivers/net/ethernet/broadcom/bgmac*
>  F:	drivers/net/ethernet/broadcom/unimac.h
>  
> -- 
> 2.25.1
> 
>