[PATCH 13/18] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

Sascha Hauer s.hauer at pengutronix.de
Wed Dec 8 07:12:25 PST 2021


This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416af..b1b0963fa8525 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
 
 / {
@@ -106,6 +107,12 @@ &gmac1m1_rgmii_clk
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -390,3 +397,27 @@ &sdmmc0 {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint at 0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint at RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2




More information about the linux-arm-kernel mailing list