[RFC PATCH 3/6] dt-bindings: crypto: Add bindings for ZynqMP SHA3 driver

[Harsha Harsha]

Hi Rob,

Thanks for your review.


> -----Original Message-----
> From: Rob Herring <robh at kernel.org>
> Sent: Wednesday, December 8, 2021 3:00 AM
> To: Harsha Harsha <harshah at xilinx.com>
> Cc: herbert at gondor.apana.org.au; davem at davemloft.net; linux-crypto at vger.kernel.org; linux-kernel at vger.kernel.org; Michal
> Simek <michals at xilinx.com>; linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org; Sarat Chand Savitala
> <saratcha at xilinx.com>; Harsh Jain <harshj at xilinx.com>
> Subject: Re: [RFC PATCH 3/6] dt-bindings: crypto: Add bindings for ZynqMP SHA3 driver
> 
> On Tue, Nov 30, 2021 at 02:24:22PM +0530, Harsha wrote:
> > This patch adds documentation to describe Xilinx ZynqMP SHA3 driver
> > bindings.
> >
> > Signed-off-by: Harsha <harsha.harsha at xilinx.com>
> > ---
> >  .../bindings/crypto/xlnx,zynqmp-sha3.yaml          | 30 ++++++++++++++++++++++
> >  1 file changed, 30 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/crypto/xlnx,zynqmp-sha3.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-sha3.yaml
> b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-sha3.yaml
> > new file mode 100644
> > index 0000000..45a8022
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-sha3.yaml
> > @@ -0,0 +1,30 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-sha3.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx ZynqMP SHA3 Hardware Accelerator Device Tree Bindings
> > +
> > +maintainers:
> > +  - Harsha Harsha<harsha.harsha at xilinx.com>
> 
> space               ^

Accepted. Will remove space in next version of patch series.

> 
> > +
> > +description: |
> 
> Don't need '|' if no formatting to preserve.

Accepted. Will remove | in next version of patch series.

> 
> > +  The ZynqMP SHA3 hardened cryptographic accelerator is used to
> > +  calculate the SHA3 hash for the given user data.
> > +
> > +properties:
> > +  compatible:
> > +    const: xlnx,zynqmp-sha3-384
> > +
> > +required:
> > +  - compatible
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    xlnx_sha3_384: sha3-384 {
> 
> crypto {
> 
> > +      compatible = "xlnx,zynqmp-sha3-384";
> 
> You need some way to access this h/w.

Accepted. Will add required details similar to https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/tree/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml 

> 
> > +    };
> > +...
> > --
> > 1.8.2.1
> >
> >

Regards,
Harsha