[PATCH v4 6/7] clk: samsung: Add initial Exynos7885 clock driver

Krzysztof Kozlowski krzysztof.kozlowski at canonical.com
Tue Dec 7 01:33:02 PST 2021


On 06/12/2021 16:31, David Virag wrote:
> This is an initial implementation adding basic clocks, such as UART,
> USI, I2C, WDT, ect. and their parent clocks. It is heavily based on the
> Exynos850 clock driver at 'drivers/clk/samsung/clk-exynos850.c' which
> was made by Sam Protsenko, thus the copyright and author lines were
> kept.
> 
> Bus clocks are enabled by default as well to avoid hangs while trying to
> access CMU registers.
> 
> Only the parts of CMU_TOP needed for CMU_CORE and CMU_PERI, a bit of
> CMU_CORE, and most of CMU_PERI is implemented as of now.
> 
> Signed-off-by: David Virag <virag.david003 at gmail.com>
> ---
> Changes in v2:
>   - Use shared code between Exynos850 and 7885 clock drivers
>   - As the code that was from the Exynos850 clock driver was moved to
>     clk-exynos-arm64.c and what remains is mostly SoC specific data,
>     move the Linaro copyright and Sam Protsenko author lines there.
> 
> Changes in v3:
>   - Nothing
> 
> Changes in v4:
>   - Fixed missing headers
> 
>  drivers/clk/samsung/Makefile         |   1 +
>  drivers/clk/samsung/clk-exynos7885.c | 597 +++++++++++++++++++++++++++
>  2 files changed, 598 insertions(+)
>  create mode 100644 drivers/clk/samsung/clk-exynos7885.c
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>


Best regards,
Krzysztof



More information about the linux-arm-kernel mailing list