[PATCH v4 1/7] net-next: stmmac: dwmac-mediatek: add platform level clocks management

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Mon Dec 6 07:14:44 PST 2021


Il 03/12/21 07:34, Biao Huang ha scritto:
> This patch implements clks_config callback for dwmac-mediatek platform,
> which could support platform level clocks management.
> 
> Signed-off-by: Biao Huang <biao.huang at mediatek.com>
> ---
>   .../ethernet/stmicro/stmmac/dwmac-mediatek.c  | 24 ++++++++++++++-----
>   1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> index 58c0feaa8131..157ff655c85e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> @@ -359,9 +359,6 @@ static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
>   		return ret;
>   	}
>   
> -	pm_runtime_enable(&pdev->dev);
> -	pm_runtime_get_sync(&pdev->dev);
> -
>   	return 0;
>   }
>   
> @@ -370,11 +367,25 @@ static void mediatek_dwmac_exit(struct platform_device *pdev, void *priv)
>   	struct mediatek_dwmac_plat_data *plat = priv;
>   
>   	clk_bulk_disable_unprepare(plat->num_clks_to_config, plat->clks);
> -
> -	pm_runtime_put_sync(&pdev->dev);
> -	pm_runtime_disable(&pdev->dev);
>   }
>   
> +static int mediatek_dwmac_clks_config(void *priv, bool enabled)
> +{
> +	struct mediatek_dwmac_plat_data *plat = priv;
> +	int ret = 0;
> +
> +	if (enabled) {
> +		ret = clk_bulk_prepare_enable(plat->num_clks_to_config, plat->clks);
> +		if (ret) {
> +			dev_err(plat->dev, "failed to enable clks, err = %d\n", ret);
> +			return ret;
> +		}
> +	} else {
> +		clk_bulk_disable_unprepare(plat->num_clks_to_config, plat->clks);
> +	}
> +
> +	return ret;
> +}
>   static int mediatek_dwmac_probe(struct platform_device *pdev)
>   {
>   	struct mediatek_dwmac_plat_data *priv_plat;
> @@ -420,6 +431,7 @@ static int mediatek_dwmac_probe(struct platform_device *pdev)
>   	plat_dat->bsp_priv = priv_plat;
>   	plat_dat->init = mediatek_dwmac_init;
>   	plat_dat->exit = mediatek_dwmac_exit;
> +	plat_dat->clks_config = mediatek_dwmac_clks_config;
>   	mediatek_dwmac_init(pdev, priv_plat);
>   
>   	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
> 

Hello Biao,

you're removing all calls to pm_runtime_* functions, so there is no more reason
to include linux/pm_runtime.h in this file: please also remove the inclusion.

Thanks!



More information about the linux-arm-kernel mailing list