[PATCH v3 1/4] Input: Add driver for Cypress Generation 5 touchscreen

[Alistair Francis]

On Sun, Dec 5, 2021 at 8:32 AM Andreas Kemnade <andreas at kemnade.info> wrote:
>
> Hi,
>
>
> On Thu,  2 Dec 2021 22:20:18 +1000
> Alistair Francis <alistair at alistair23.me> wrote:
>
> > From: Mylène Josserand <mylene.josserand at bootlin.com>
> >
> > This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
> > controllers. This driver supports only the I2C bus but it uses regmap
> > so SPI support could be added later.
> > The touchscreen can retrieve some defined zone that are handled as
> > buttons (according to the hardware). That is why it handles
> > button and multitouch events.
> >
> > Reviewed-by: Maxime Ripard <maxime.ripard at bootlin.com>
> > Signed-off-by: Mylène Josserand <mylene.josserand at bootlin.com>
> > Message-Id: <20180703094309.18514-2-mylene.josserand at bootlin.com>
> > Signed-off-by: Alistair Francis <alistair at alistair23.me>
>
> I finally got it working. The order of initialisation is important.
> Params are copied on input_mt_init_slots() from ABS_MT* to ABS_*, so you
> have to set params first.
>
> Here is the patch i need on top of this one to make it actually work
> with X (evdev and libinput is tested):
>
> diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
> index b5d96eb71e46..3894ec85a732 100644
> --- a/drivers/input/touchscreen/cyttsp5.c
> +++ b/drivers/input/touchscreen/cyttsp5.c
> @@ -415,19 +415,12 @@ static int cyttsp5_setup_input_device(struct device *dev)
>         int max_x_tmp, max_y_tmp;
>         int error;
>
> -       __set_bit(EV_REL, ts->input->evbit);

Does it work with this still included? I need this for my userspace program.

Alistair

> -
>         max_x_tmp = si->sensing_conf_data.res_x;
>         max_y_tmp = si->sensing_conf_data.res_y;
>         max_x = max_x_tmp - 1;
>         max_y = max_y_tmp - 1;
>         max_p = si->sensing_conf_data.max_z;
>
> -       error = input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max,
> -               INPUT_MT_DROP_UNUSED | INPUT_MT_POINTER);
> -       if (error < 0)
> -               return error;
> -
>         input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
>         input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
>         input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
> @@ -435,6 +428,11 @@ static int cyttsp5_setup_input_device(struct device *dev)
>         input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
>         input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);
>
> +       error = input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max,
> +               INPUT_MT_DROP_UNUSED | INPUT_MT_DIRECT);
> +       if (error < 0)
> +               return error;
> +
>         error = input_register_device(ts->input);
>         if (error < 0)
>                 dev_err(dev, "Error, failed register input device r=%d\n", error);
>