[PATCH v3 7/7] arm64: dts: exynos: Add initial device tree support for Exynos7885 SoC

[Krzysztof Kozlowski]

On 06/12/2021 00:08, David Virag wrote:
> Add initial Exynos7885 device tree nodes with dts for the Samsung Galaxy
> A8 (2018), a.k.a. "jackpotlte", with model number "SM-A530F".
> Currently this includes some clock support, UART support, and I2C nodes.
> 
> Signed-off-by: David Virag <virag.david003 at gmail.com>
> ---
> Changes in v2:
>   - Remove address-cells, and size-cells from dts, since they are
>     already in the dtsi.
>   - Lower case hex in memory node
>   - Fix node names with underscore instead of hyphen
>   - Fix line breaks
>   - Fix "-key" missing from gpio keys node names
>   - Use the form without "key" in gpio key labels on all keys
>   - Suffix pin configuration node names with "-pins"
>   - Remove "fimc_is_mclk" nodes from pinctrl dtsi for now
>   - Use macros for "samsung,pin-con-pdn", and "samsung,pin-con-pdn"
>   - Add comment about Arm PMU
>   - Rename "clock-oscclk" to "osc-clock"
>   - Include exynos-syscon-restart.dtsi instead of rewriting its contents
> 
> Changes in v3:
>   - Fix typo (seperate -> separate)
> 
>  arch/arm64/boot/dts/exynos/Makefile           |   7 +-
>  .../boot/dts/exynos/exynos7885-jackpotlte.dts |  95 ++
>  .../boot/dts/exynos/exynos7885-pinctrl.dtsi   | 865 ++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos7885.dtsi    | 438 +++++++++
>  4 files changed, 1402 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7885.dtsi
> 

(...)

> diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
> new file mode 100644
> index 000000000000..e85a6b988beb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
> @@ -0,0 +1,438 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung Exynos7885 SoC device tree source
> + *
> + * Copyright (c) 2021 Samsung Electronics Co., Ltd.
> + * Copyright (c) 2021 Dávid Virág
> + *
> + */
> +
> +#include <dt-bindings/clock/exynos7885.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "samsung,exynos7885";
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		pinctrl0 = &pinctrl_alive;
> +		pinctrl1 = &pinctrl_dispaud;
> +		pinctrl2 = &pinctrl_fsys;
> +		pinctrl3 = &pinctrl_top;
> +	};
> +
> +	/*
> +	 * We should have two separate nodes for a53 and a73, but we have
> +	 * no documentation about which interrupts belong to which one.
> +	 */

Interrupt affinity suggests it. Interrupts 82 and 83 are for Cortex A73,
so you should have something like exynos5433.dtsi, but of course with
different amount of cores in each cluster and proper compatibles.

You can test working ARM PMU with perf, e.g.
$ perf list | grep Hardware
$ perf stat -e
task-clock,cycles,instructions,branches,branch-misses,cache-misses,branch-load-misses,branch-loads

The current solution with one PMU and SW-model compatible might work
fine, but it does not look correct.

> +	arm-pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpu6>,
> +				     <&cpu7>,
> +				     <&cpu0>,
> +				     <&cpu1>,
> +				     <&cpu2>,
> +				     <&cpu3>,
> +				     <&cpu4>,
> +				     <&cpu5>;
> +	};
> +

Rest looks good.

Best regards,
Krzysztof