[PATCH v15 3/3] ARM: dts: imx7d: remarkable2: add wacom digitizer device

[Shawn Guo]

On Thu, Dec 02, 2021 at 09:56:22PM +1000, Alistair Francis wrote:
> Signed-off-by: Alistair Francis <alistair at alistair23.me>

Please write up some commit log.

Shawn

> ---
>  arch/arm/boot/dts/imx7d-remarkable2.dts | 59 +++++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> index 89cbf13097a4..a2a91bfdd98e 100644
> --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> @@ -34,6 +34,19 @@ reg_brcm: regulator-brcm {
>  		startup-delay-us = <150>;
>  	};
>  
> +	reg_digitizer: regulator-digitizer {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDD_3V3_DIGITIZER";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		pinctrl-names = "default", "sleep";
> +		pinctrl-0 = <&pinctrl_digitizer_reg>;
> +		pinctrl-1 = <&pinctrl_digitizer_reg>;
> +		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		startup-delay-us = <100000>; /* 100 ms */
> +	};
> +
>  	wifi_pwrseq: wifi_pwrseq {
>  		compatible = "mmc-pwrseq-simple";
>  		pinctrl-names = "default";
> @@ -51,6 +64,26 @@ &clks {
>  	assigned-clock-rates = <0>, <32768>;
>  };
>  
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	wacom_digitizer: digitizer at 9 {
> +		compatible = "hid-over-i2c";
> +		reg = <0x09>;
> +		hid-descr-addr = <0x01>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_wacom>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> +		touchscreen-inverted-x;
> +		touchscreen-inverted-y;
> +		vdd-supply = <&reg_digitizer>;
> +	};
> +};
> +
>  &snvs_pwrkey {
>  	status = "okay";
>  };
> @@ -117,6 +150,25 @@ &wdog1 {
>  	fsl,ext-reset-output;
>  };
>  
> +&iomuxc_lpsr {
> +	pinctrl_digitizer_reg: digitizerreggrp {
> +		fsl,pins = <
> +			/* DIGITIZER_PWR_EN */
> +			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
> +		>;
> +	};
> +
> +	pinctrl_wacom: wacomgrp {
> +		fsl,pins = <
> +			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
> +			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
> +			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
> +			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
> +			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
> +		>;
> +	};
> +};
> +
>  &iomuxc {
>  	pinctrl_brcm_reg: brcmreggrp {
>  		fsl,pins = <
> @@ -125,6 +177,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
>  		>;
>  	};
>  
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
> +			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
> +		>;
> +	};
> +
>  	pinctrl_uart1: uart1grp {
>  		fsl,pins = <
>  			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
> -- 
> 2.31.1
>