[PATCH v3 0/2] arm/arm64: dts: Enable more network hardware

[Chris Packham]

This series enables the Switch on the CN9130-CRB. The changes are based on the
Marvell SDK.

Note that if anyone tries out the SFP+ port on a complete CRB shipped from
Marvell the chassis prevents the ejector from working so the SFP will get
stuck. Taking the board out of the chassis allows the SFP to be
insterted/removed.

Chris Packham (2):
  arm/arm64: dts: Enable CP0 GPIOs for CN9130-CRB
  arm/arm64: dts: Add MV88E6393X to CN9130-CRB device tree

 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 140 ++++++++++++++++++++
 1 file changed, 140 insertions(+)

-- 
2.34.1