[PATCH v2 4/7] clk: samsung: Make exynos850_register_cmu shared
David Virag
virag.david003 at gmail.com
Sun Dec 5 14:11:03 PST 2021
Rename exynos850_register_cmu to exynos_arm64_register_cmu and move it
to a new file called "clk-exynos-arm64.c".
This should have no functional changes, but it will allow this code to
be shared between other arm64 Exynos SoCs, like the Exynos7885 and
possibly ExynosAuto V9.
Signed-off-by: David Virag <virag.david003 at gmail.com>
---
Changes in v2:
- New patch
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-exynos-arm64.c | 94 ++++++++++++++++++++++++++
drivers/clk/samsung/clk-exynos-arm64.h | 20 ++++++
drivers/clk/samsung/clk-exynos850.c | 94 ++------------------------
4 files changed, 119 insertions(+), 90 deletions(-)
create mode 100644 drivers/clk/samsung/clk-exynos-arm64.c
create mode 100644 drivers/clk/samsung/clk-exynos-arm64.h
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index c46cf11e4d0b..901e6333c5f0 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_EXYNOS_5420_COMMON_CLK) += clk-exynos5-subcmu.o
obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos5433.o
obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
obj-$(CONFIG_EXYNOS_CLKOUT) += clk-exynos-clkout.o
+obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos-arm64.o
obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7.o
obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos850.o
obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
diff --git a/drivers/clk/samsung/clk-exynos-arm64.c b/drivers/clk/samsung/clk-exynos-arm64.c
new file mode 100644
index 000000000000..b921b9a1134a
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos-arm64.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Linaro Ltd.
+ * Copyright (C) 2021 Dávid Virág <virag.david003 at gmail.com>
+ * Author: Sam Protsenko <semen.protsenko at linaro.org>
+ * Author: Dávid Virág <virag.david003 at gmail.com>
+ *
+ * This file contains shared functions used by some arm64 Exynos SoCs,
+ * such as Exynos7885 or Exynos850 to register and init CMUs.
+ */
+#include <linux/clk.h>
+#include <linux/of_address.h>
+
+#include "clk-exynos-arm64.h"
+
+/* Gate register bits */
+#define GATE_MANUAL BIT(20)
+#define GATE_ENABLE_HWACG BIT(28)
+
+/* Gate register offsets range */
+#define GATE_OFF_START 0x2000
+#define GATE_OFF_END 0x2fff
+
+/**
+ * exynos_arm64_init_clocks - Set clocks initial configuration
+ * @np: CMU device tree node with "reg" property (CMU addr)
+ * @reg_offs: Register offsets array for clocks to init
+ * @reg_offs_len: Number of register offsets in reg_offs array
+ *
+ * Set manual control mode for all gate clocks.
+ */
+static void __init exynos_arm64_init_clocks(struct device_node *np,
+ const unsigned long *reg_offs, size_t reg_offs_len)
+{
+ void __iomem *reg_base;
+ size_t i;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+
+ for (i = 0; i < reg_offs_len; ++i) {
+ void __iomem *reg = reg_base + reg_offs[i];
+ u32 val;
+
+ /* Modify only gate clock registers */
+ if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
+ continue;
+
+ val = readl(reg);
+ val |= GATE_MANUAL;
+ val &= ~GATE_ENABLE_HWACG;
+ writel(val, reg);
+ }
+
+ iounmap(reg_base);
+}
+
+/**
+ * exynos_arm64_register_cmu - Register specified Exynos CMU domain
+ * @dev: Device object; may be NULL if this function is not being
+ * called from platform driver probe function
+ * @np: CMU device tree node
+ * @cmu: CMU data
+ *
+ * Register specified CMU domain, which includes next steps:
+ *
+ * 1. Enable parent clock of @cmu CMU
+ * 2. Set initial registers configuration for @cmu CMU clocks
+ * 3. Register @cmu CMU clocks using Samsung clock framework API
+ */
+void __init exynos_arm64_register_cmu(struct device *dev,
+ struct device_node *np, const struct samsung_cmu_info *cmu)
+{
+ /* Keep CMU parent clock running (needed for CMU registers access) */
+ if (cmu->clk_name) {
+ struct clk *parent_clk;
+
+ if (dev)
+ parent_clk = clk_get(dev, cmu->clk_name);
+ else
+ parent_clk = of_clk_get_by_name(np, cmu->clk_name);
+
+ if (IS_ERR(parent_clk)) {
+ pr_err("%s: could not find bus clock %s; err = %ld\n",
+ __func__, cmu->clk_name, PTR_ERR(parent_clk));
+ } else {
+ clk_prepare_enable(parent_clk);
+ }
+ }
+
+ exynos_arm64_init_clocks(np, cmu->clk_regs, cmu->nr_clk_regs);
+ samsung_cmu_register_one(np, cmu);
+}
diff --git a/drivers/clk/samsung/clk-exynos-arm64.h b/drivers/clk/samsung/clk-exynos-arm64.h
new file mode 100644
index 000000000000..184ca79ea649
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos-arm64.h
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Linaro Ltd.
+ * Copyright (C) 2021 Dávid Virág <virag.david003 at gmail.com>
+ * Author: Sam Protsenko <semen.protsenko at linaro.org>
+ * Author: Dávid Virág <virag.david003 at gmail.com>
+ *
+ * This file contains shared functions used by some arm64 Exynos SoCs,
+ * such as Exynos7885 or Exynos850 to register and init CMUs.
+ */
+
+#ifndef __SAMSUNG_CLK_ARM64_H
+#define __SAMSUNG_CLK_ARM64_H
+
+#include "clk.h"
+
+void exynos_arm64_register_cmu(struct device *dev,
+ struct device_node *np, const struct samsung_cmu_info *cmu);
+
+#endif /* __CLK_EXYNOS_ARM64_H */
diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
index 568ac97c8120..3cc85b64cbff 100644
--- a/drivers/clk/samsung/clk-exynos850.c
+++ b/drivers/clk/samsung/clk-exynos850.c
@@ -6,96 +6,10 @@
* Common Clock Framework support for Exynos850 SoC.
*/
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
-#include <linux/platform_device.h>
-
#include <dt-bindings/clock/exynos850.h>
-#include "clk.h"
-
-/* Gate register bits */
-#define GATE_MANUAL BIT(20)
-#define GATE_ENABLE_HWACG BIT(28)
-
-/* Gate register offsets range */
-#define GATE_OFF_START 0x2000
-#define GATE_OFF_END 0x2fff
-
-/**
- * exynos850_init_clocks - Set clocks initial configuration
- * @np: CMU device tree node with "reg" property (CMU addr)
- * @reg_offs: Register offsets array for clocks to init
- * @reg_offs_len: Number of register offsets in reg_offs array
- *
- * Set manual control mode for all gate clocks.
- */
-static void __init exynos850_init_clocks(struct device_node *np,
- const unsigned long *reg_offs, size_t reg_offs_len)
-{
- void __iomem *reg_base;
- size_t i;
-
- reg_base = of_iomap(np, 0);
- if (!reg_base)
- panic("%s: failed to map registers\n", __func__);
-
- for (i = 0; i < reg_offs_len; ++i) {
- void __iomem *reg = reg_base + reg_offs[i];
- u32 val;
-
- /* Modify only gate clock registers */
- if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
- continue;
-
- val = readl(reg);
- val |= GATE_MANUAL;
- val &= ~GATE_ENABLE_HWACG;
- writel(val, reg);
- }
-
- iounmap(reg_base);
-}
-
-/**
- * exynos850_register_cmu - Register specified Exynos850 CMU domain
- * @dev: Device object; may be NULL if this function is not being
- * called from platform driver probe function
- * @np: CMU device tree node
- * @cmu: CMU data
- *
- * Register specified CMU domain, which includes next steps:
- *
- * 1. Enable parent clock of @cmu CMU
- * 2. Set initial registers configuration for @cmu CMU clocks
- * 3. Register @cmu CMU clocks using Samsung clock framework API
- */
-static void __init exynos850_register_cmu(struct device *dev,
- struct device_node *np, const struct samsung_cmu_info *cmu)
-{
- /* Keep CMU parent clock running (needed for CMU registers access) */
- if (cmu->clk_name) {
- struct clk *parent_clk;
-
- if (dev)
- parent_clk = clk_get(dev, cmu->clk_name);
- else
- parent_clk = of_clk_get_by_name(np, cmu->clk_name);
-
- if (IS_ERR(parent_clk)) {
- pr_err("%s: could not find bus clock %s; err = %ld\n",
- __func__, cmu->clk_name, PTR_ERR(parent_clk));
- } else {
- clk_prepare_enable(parent_clk);
- }
- }
-
- exynos850_init_clocks(np, cmu->clk_regs, cmu->nr_clk_regs);
- samsung_cmu_register_one(np, cmu);
-}
+#include "clk-exynos-arm64.h"
/* ---- CMU_TOP ------------------------------------------------------------- */
@@ -404,7 +318,7 @@ static const struct samsung_cmu_info top_cmu_info __initconst = {
static void __init exynos850_cmu_top_init(struct device_node *np)
{
- exynos850_register_cmu(NULL, np, &top_cmu_info);
+ exynos_arm64_register_cmu(NULL, np, &top_cmu_info);
}
/* Register CMU_TOP early, as it's a dependency for other early domains */
@@ -892,7 +806,7 @@ static const struct samsung_cmu_info peri_cmu_info __initconst = {
static void __init exynos850_cmu_peri_init(struct device_node *np)
{
- exynos850_register_cmu(NULL, np, &peri_cmu_info);
+ exynos_arm64_register_cmu(NULL, np, &peri_cmu_info);
}
/* Register CMU_PERI early, as it's needed for MCT timer */
@@ -1069,7 +983,7 @@ static int __init exynos850_cmu_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
info = of_device_get_match_data(dev);
- exynos850_register_cmu(dev, dev->of_node, info);
+ exynos_arm64_register_cmu(dev, dev->of_node, info);
return 0;
}
--
2.34.1
More information about the linux-arm-kernel
mailing list