[PATCH 6/6] arm64: dts: exynos: Add initial device tree support for Exynos7885 SoC
Krzysztof Kozlowski
krzysztof.kozlowski at canonical.com
Sun Dec 5 09:31:18 PST 2021
On 05/12/2021 16:33, David Virag wrote:
> Add initial Exynos7885 device tree nodes with dts for the Samsung Galaxy
> A8 (2018), a.k.a. "jackpotlte", with model number "SM-A530F".
> Currently this includes some clock support, UART support, and I2C nodes.
>
> Signed-off-by: David Virag <virag.david003 at gmail.com>
> ---
> arch/arm64/boot/dts/exynos/Makefile | 7 +-
> .../boot/dts/exynos/exynos7885-jackpotlte.dts | 95 ++
> .../boot/dts/exynos/exynos7885-pinctrl.dtsi | 929 ++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos7885.dtsi | 444 +++++++++
> 4 files changed, 1472 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7885.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index b41e86df0a84..c68c4ad577ac 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_ARCH_EXYNOS) += \
> - exynos5433-tm2.dtb \
> - exynos5433-tm2e.dtb \
> - exynos7-espresso.dtb \
> + exynos5433-tm2.dtb \
> + exynos5433-tm2e.dtb \
> + exynos7-espresso.dtb \
> + exynos7885-jackpotlte.dtb \
> exynosautov9-sadk.dtb
> diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
> new file mode 100644
> index 000000000000..eb1c354d4fc8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
> @@ -0,0 +1,95 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung Galaxy A8 2018 (jackpotlte/SM-A530F) device tree source
> + *
> + * Copyright (c) 2021 Samsung Electronics Co., Ltd.
> + * Copyright (c) 2021 Dávid Virág
> + *
> + */
> +
> +/dts-v1/;
> +#include "exynos7885.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "Samsung Galaxy A8 (2018)";
> + compatible = "samsung,jackpotlte", "samsung,exynos7885";
> + chassis-type = "handset";
> +
> + #address-cells = <2>;
> + #size-cells = <1>;
You define these also in DTSI, so skip them.
> +
> + aliases {
> + serial0 = &serial_0;
> + serial1 = &serial_1;
> + serial2 = &serial_2;
> + };
> +
> + chosen {
> + stdout-path = &serial_2;
> + };
> +
> + memory at 80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x3DA00000>,
> + <0x0 0xC0000000 0x40000000>,
> + <0x8 0x80000000 0x40000000>;
Lower-case hex please, consistent with other places.
> + };
> +
> + gpio_keys {
Node names go with hyphen '-'.
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&key_volup &key_voldown &key_power>;
One line break.
> + volup {
End node name with suffix "-key".
> + label = "Volume Up";
> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-parent = <&gpa1>;
> + linux,code = <KEY_VOLUMEUP>;
> + gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
> + };
One line break.
> + voldown {
End node name with suffix "-key".
> + label = "Volume Down";
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-parent = <&gpa1>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + gpios = <&gpa1 6 GPIO_ACTIVE_LOW>;
> + };
One line break.
> + powerkey {
End node name with suffix "-key", so "power-key".
> + label = "Power Key";
Why this label is a key, but other keys are not keys?
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-parent = <&gpa1>;
> + linux,code = <KEY_POWER>;
> + gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
> + wakeup-source;
> + };
> + };
> +};
> +
> +&serial_2 {
> + status = "okay";
> +};
> +
> +&pinctrl_alive {
> + key_volup: key-volup {
Here and in DTS - all node names with suffix "-pins".
> + samsung,pins = "gpa1-5";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + key_voldown: key-voldown {
> + samsung,pins = "gpa1-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + key_power: key-power {
> + samsung,pins = "gpa1-7";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
> new file mode 100644
> index 000000000000..69e0004b7c32
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
> @@ -0,0 +1,929 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung Exynos7885 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2017 Samsung Electronics Co., Ltd.
> + * Copyright (c) 2021 Dávid Virág
> + *
> + * Samsung's Exynos7885 SoC pin-mux and pin-config options are listed as
> + * device tree nodes in this file.
> + */
> +
> +#include <dt-bindings/pinctrl/samsung.h>
> +
> +&pinctrl_alive {
> + etc0: etc0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + etc1: etc1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa0: gpa0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpa1: gpa1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpa2: gpa2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpq0: gpq0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sim1_det_gpio: sim1_det_gpio {
Node names go with hyphen.
> + samsung,pins = "gpa2-5";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + sim0_det_gpio: sim0_det_gpio {
> + samsung,pins = "gpa2-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + speedy_bus: speedy-bus {
> + samsung,pins = "gpq0-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-con-pdn = <3>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + /* UART_DEBUG */
> + uart2_bus: uart2-bus {
> + samsung,pins = "gpq0-4", "gpq0-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +};
> +
> +&pinctrl_dispaud {
> + gpb0: gpb0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb1: gpb1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb2: gpb2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + aud_codec_mclk: aud-codec-mclk {
> + samsung,pins = "gpb0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_codec_mclk_idle: aud-codec-mclk-idle {
> + samsung,pins = "gpb0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_codec_bus: aud-codec-bus {
> + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_codec_bus_idle: aud-codec-bus-idle {
> + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_loopback_bus: aud-loopback-bus{
> + samsung,pins = "gpb1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_loopback_bus_idle: aud-loopback-bus-idle{
> + samsung,pins = "gpb1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_fm_bus: aud-fm-bus {
> + samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_fm_bus_idle: aud-fm-bus-idle {
> + samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_spk_bus: aud-spk-bus {
> + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_spk_bus_idle: aud-spk-bus-idle {
> + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> +};
> +
> +&pinctrl_fsys {
> + gpf0: gpf0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf2: gpf2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf3: gpf3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf4: gpf4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sd0_clk: sd0-clk {
> + samsung,pins = "gpf0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_clk_fast_slew_rate_1x: sd0-clk_fast_slew_rate_1x {
> + samsung,pins = "gpf0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + sd0_clk_fast_slew_rate_2x: sd0-clk_fast_slew_rate_2x {
> + samsung,pins = "gpf0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <1>;
> + };
> +
> + sd0_clk_fast_slew_rate_3x: sd0-clk_fast_slew_rate_3x {
> + samsung,pins = "gpf0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd0_clk_fast_slew_rate_4x: sd0-clk_fast_slew_rate_4x {
> + samsung,pins = "gpf0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_cmd: sd0-cmd {
> + samsung,pins = "gpf0-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_rdqs: sd0-rdqs {
> + samsung,pins = "gpf0-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus1: sd0-bus-width1 {
> + samsung,pins = "gpf2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus4: sd0-bus-width4 {
> + samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus8: sd0-bus-width8 {
> + samsung,pins = "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_clk: sd1-clk {
> + samsung,pins = "gpf3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd1_clk_fast_slew_rate_1x: sd1-clk_fast_slew_rate_1x {
> + samsung,pins = "gpf3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + sd1_clk_fast_slew_rate_2x: sd1-clk_fast_slew_rate_2x {
> + samsung,pins = "gpf3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <1>;
> + };
> +
> + sd1_clk_fast_slew_rate_3x: sd1-clk_fast_slew_rate_3x {
> + samsung,pins = "gpf3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd1_clk_fast_slew_rate_4x: sd1-clk_fast_slew_rate_4x {
> + samsung,pins = "gpf3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_cmd: sd1-cmd {
> + samsung,pins = "gpf3-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd1_bus1: sd1-bus-width1 {
> + samsung,pins = "gpf3-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd1_bus4: sd1-bus-width4 {
> + samsung,pins = "gpf3-3", "gpf3-5";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd2_clk: sd2-clk {
> + samsung,pins = "gpf4-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd2_clk_fast_slew_rate_1x: sd2-clk_fast_slew_rate_1x {
> + samsung,pins = "gpf4-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + sd2_clk_fast_slew_rate_2x: sd2-clk_fast_slew_rate_2x {
> + samsung,pins = "gpf4-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <1>;
> + };
> +
> + sd2_clk_fast_slew_rate_3x: sd2-clk_fast_slew_rate_3x {
> + samsung,pins = "gpf4-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd2_clk_fast_slew_rate_4x: sd2-clk_fast_slew_rate_4x {
> + samsung,pins = "gpf4-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cmd: sd2-cmd {
> + samsung,pins = "gpf4-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd2_bus1: sd2-bus-width1 {
> + samsung,pins = "gpf4-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd2_bus4: sd2-bus-width4 {
> + samsung,pins = "gpf4-3", "gpf4-4", "gpf4-5";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <2>;
> + };
> +};
> +
> +&pinctrl_top {
> + gpc0: gpc0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc1: gpc1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc2: gpc2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg0: gpg0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg1: gpg1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg2: gpg2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg3: gpg3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg4: gpg4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp0: gpp0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp1: gpp1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp2: gpp2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp3: gpp3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp4: gpp4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp5: gpp5 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp6: gpp6 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp7: gpp7 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp8: gpp8 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + fimc_is_mclk0_in: fimc_is_mclk0_in {
> + samsung,pins = "gpc0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + fimc_is_mclk0_out: fimc_is_mclk0_out {
> + samsung,pins = "gpc0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + fimc_is_mclk0_fn: fimc_is_mclk0_fn {
I cannot get the point of these pin configurations - three groups with
only function difference. How this would be used by the driver? Maybe
just keep the one really used. Same for others below.
> + samsung,pins = "gpc0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + fimc_is_mclk1_in: fimc_is_mclk1_in {
> + samsung,pins = "gpc0-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + fimc_is_mclk1_out: fimc_is_mclk1_out {
> + samsung,pins = "gpc0-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <1>;
> + };
> +
> + fimc_is_mclk1_fn: fimc_is_mclk1_fn {
> + samsung,pins = "gpc0-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <1>;
> + };
> +
> + fimc_is_mclk2_in: fimc_is_mclk2_in {
> + samsung,pins = "gpc0-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <2>;
> + };
> +
> + fimc_is_mclk2_out: fimc_is_mclk2_out {
> + samsung,pins = "gpc0-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <1>;
> + };
> +
> + fimc_is_mclk2_fn: fimc_is_mclk2_fn {
> + samsung,pins = "gpc0-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <1>;
> + };
> +
> + /* DECON TE */
> + decon_f_te_on: decon_f_te_on {
> + samsung,pins = "gpc0-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> + };
> +
> + decon_f_te_off: decon_f_te_off {
> + samsung,pins = "gpc0-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + };
> +
> + hs_i2c0_bus: hs-i2c0-bus {
> + samsung,pins = "gpc1-1", "gpc1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
We have macros for these. Sam was using them for Exynos850, so I expect
the values have the same meaning also in Exynos7885. Use them please.
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c1_bus: hs-i2c1-bus {
> + samsung,pins = "gpc1-3", "gpc1-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + hs_i2c2_bus: hs-i2c2-bus {
> + samsung,pins = "gpc1-5", "gpc1-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + hs_i2c3_bus: hs-i2c3-bus {
> + samsung,pins = "gpc1-7", "gpc1-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + /* USI0 UART */
> + uart3_bus_single: uart3-bus-single {
> + samsung,pins = "gpc2-3", "gpc2-2", "gpc2-1", "gpc2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI0 UART_HSI2C1 */
> + uart3_bus_dual: uart3-bus-dual {
> + samsung,pins = "gpc2-1", "gpc2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI0 HSI2C0 */
> + hs_i2c4_bus: hs-i2c4-bus {
> + samsung,pins = "gpc2-1", "gpc2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + /* USI0 HSI2C1 */
> + hs_i2c5_bus: hs-i2c5-bus {
> + samsung,pins = "gpc2-3", "gpc2-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + /* USI0 SPI */
> + spi2_bus: spi2-bus {
> + samsung,pins = "gpc2-1", "gpc2-0", "gpc2-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi2_cs: spi2-cs {
> + samsung,pins = "gpc2-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + /* USI1 UART */
> + uart4_bus_single: uart4-bus-single {
> + samsung,pins = "gpc2-7", "gpc2-6", "gpc2-5", "gpc2-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI1 UART_HSI2C1*/
> + uart4_bus_dual: uart4-bus-dual {
> + samsung,pins = "gpc2-5", "gpc2-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI1 HSI2C0 */
> + hs_i2c6_bus: hs-i2c6-bus {
> + samsung,pins = "gpc2-5", "gpc2-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + /* USI1 HSI2C1 */
> + hs_i2c7_bus: hs-i2c7-bus {
> + samsung,pins = "gpc2-7", "gpc2-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + /* USI1 SPI */
> + spi3_bus: spi3-bus {
> + samsung,pins = "gpc2-5", "gpc2-4", "gpc2-7";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi3_cs: spi3-cs {
> + samsung,pins = "gpc2-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fm_lna_en: fm-lna-en {
> + samsung,pins = "gpg0-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + samsung,pin-con-pdn = <3>;
> + samsung,pin-pud-pdn = <3>;
> + samsung,pin-val = <1>;
> + };
> +
> + uart1_bus: uart1-bus {
> + samsung,pins = "gpg1-3", "gpg1-2", "gpg1-1", "gpg1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + i2c7_bus: i2c7-bus {
> + samsung,pins = "gpg1-5", "gpg1-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + aud_dmic_on: aud_dmic_on {
> + samsung,pins = "gpg2-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-con-pdn = <3>;
> + samsung,pin-val = <1>;
> + };
> +
> + aud_dmic_off: aud_dmic_off {
> + samsung,pins = "gpg2-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-con-pdn = <3>;
> + samsung,pin-val = <0>;
> + };
> +
> + /* UART_HEALTH */
> + uart0_bus: uart0-bus {
> + samsung,pins = "gpp0-3", "gpp0-2", "gpp0-1", "gpp0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + i2c0_bus: i2c0-bus {
> + samsung,pins = "gpp1-1", "gpp1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-con-pdn = <3>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c1_bus: i2c1-bus {
> + samsung,pins = "gpp1-3", "gpp1-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-con-pdn = <3>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c2_bus: i2c2-bus {
> + samsung,pins = "gpp2-1", "gpp2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c3_bus: i2c3-bus {
> + samsung,pins = "gpp3-1", "gpp3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c4_bus: i2c4-bus {
> + samsung,pins = "gpp4-1", "gpp4-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c5_bus: i2c5-bus {
> + samsung,pins = "gpp4-3", "gpp4-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c6_bus: i2c6-bus {
> + samsung,pins = "gpp4-5", "gpp4-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + /* SPI_ESE */
> + spi0_bus: spi0-bus {
> + samsung,pins = "gpp5-3", "gpp5-2", "gpp5-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi0_cs: spi0-cs {
> + samsung,pins = "gpp5-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + /* SPI_FP */
> + spi1_bus: spi1-bus {
> + samsung,pins = "gpp6-3", "gpp6-2", "gpp6-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi1_cs: spi1-cs {
> + samsung,pins = "gpp6-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + /* USI2 UART */
> + uart5_bus_single: uart5-bus-single {
> + samsung,pins = "gpp8-1", "gpp8-0", "gpp7-1", "gpp7-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI2 UART_HSI2C1 */
> + uart5_bus_dual: uart5-bus-dual {
> + samsung,pins = "gpp7-1", "gpp7-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI2 HSI2C0 */
> + hs_i2c8_bus: hs-i2c8-bus {
> + samsung,pins = "gpp7-1", "gpp7-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + /* USI2 HSI2C1 */
> + hs_i2c9_bus: hs-i2c9-bus {
> + samsung,pins = "gpp8-1", "gpp8-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + samsung,pin-con-pdn = <1>;
> + samsung,pin-pud-pdn = <3>;
> + };
> +
> + /* USI2 SPI */
> + spi4_bus: spi4-bus {
> + samsung,pins = "gpp7-1", "gpp7-0", "gpp8-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi4_cs: spi4-cs {
> + samsung,pins = "gpp8-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
> new file mode 100644
> index 000000000000..f94e02941a55
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
> @@ -0,0 +1,447 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung Exynos7885 SoC device tree source
> + *
> + * Copyright (c) 2021 Samsung Electronics Co., Ltd.
> + * Copyright (c) 2021 Dávid Virág
> + *
> + */
> +
> +#include <dt-bindings/clock/exynos7885.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "samsung,exynos7885";
> + #address-cells = <2>;
> + #size-cells = <1>;
> +
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + pinctrl0 = &pinctrl_alive;
> + pinctrl1 = &pinctrl_dispaud;
> + pinctrl2 = &pinctrl_fsys;
> + pinctrl3 = &pinctrl_top;
> + };
> +
> + arm-pmu {
> + compatible = "arm,armv8-pmuv3";
Wrong compatible. Please use specific, although I don't know which one
you have - 53 or 73... since you have two clusters, I would expect two
PMUs, hmm....
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu6>,
> + <&cpu7>,
> + <&cpu0>,
> + <&cpu1>,
> + <&cpu2>,
> + <&cpu3>,
> + <&cpu4>,
> + <&cpu5>;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + core4 {
> + cpu = <&cpu4>;
> + };
> + core5 {
> + cpu = <&cpu5>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu6>;
> + };
> + core1 {
> + cpu = <&cpu7>;
> + };
> + };
> + };
> +
> + cpu0: cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x100>;
> + enable-method = "psci";
> + };
> +
> + cpu1: cpu at 101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x101>;
> + enable-method = "psci";
> + };
> +
> + cpu2: cpu at 102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x102>;
> + enable-method = "psci";
> + };
> +
> + cpu3: cpu at 103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x103>;
> + enable-method = "psci";
> + };
> +
> + cpu4: cpu at 200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x200>;
> + enable-method = "psci";
> + };
> +
> + cpu5: cpu at 201 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x201>;
> + enable-method = "psci";
> + };
> +
> + cpu6: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a73";
> + reg = <0x0>;
> + enable-method = "psci";
> + };
> +
> + cpu7: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a73";
> + reg = <0x1>;
> + enable-method = "psci";
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci";
> + method = "smc";
> + cpu_suspend = <0xc4000001>;
> + cpu_off = <0x84000002>;
> + cpu_on = <0xc4000003>;
> + };
> +
> +
No need for double empty line.
> + timer {
> + compatible = "arm,armv8-timer";
> + /* Hypervisor Virtual Timer interrupt is not wired to GIC */
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + fixed-rate-clocks {
> + oscclk: clock-oscclk {
Node name "osc-clock" (clock-oscclk double clock)
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "oscclk";
> + };
> + };
> +
> + soc: soc at 0 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x0 0x20000000>;
> +
> + chipid at 10000000 {
> + compatible = "samsung,exynos850-chipid";
> + reg = <0x10000000 0x24>;
> + };
> +
> + gic: interrupt-controller at 12301000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x12301000 0x1000>,
> + <0x12302000 0x2000>,
> + <0x12304000 0x2000>,
> + <0x12306000 0x2000>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
> + IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + cmu_peri: clock-controller at 0x10010000 {
> + compatible = "samsung,exynos7885-cmu-peri";
> + reg = <0x10010000 0x8000>;
> + #clock-cells = <1>;
> +
> + clocks = <&oscclk>,
> + <&cmu_top CLK_DOUT_PERI_BUS>,
> + <&cmu_top CLK_DOUT_PERI_SPI0>,
> + <&cmu_top CLK_DOUT_PERI_SPI1>,
> + <&cmu_top CLK_DOUT_PERI_UART0>,
> + <&cmu_top CLK_DOUT_PERI_UART1>,
> + <&cmu_top CLK_DOUT_PERI_UART2>,
> + <&cmu_top CLK_DOUT_PERI_USI0>,
> + <&cmu_top CLK_DOUT_PERI_USI1>,
> + <&cmu_top CLK_DOUT_PERI_USI2>;
> + clock-names = "oscclk",
> + "dout_peri_bus",
> + "dout_peri_spi0",
> + "dout_peri_spi1",
> + "dout_peri_uart0",
> + "dout_peri_uart1",
> + "dout_peri_uart2",
> + "dout_peri_usi0",
> + "dout_peri_usi1",
> + "dout_peri_usi2";
> + };
> +
> + cmu_core: clock-controller at 0x12000000 {
> + compatible = "samsung,exynos7885-cmu-core";
> + reg = <0x12000000 0x8000>;
> + #clock-cells = <1>;
> +
> + clocks = <&oscclk>,
> + <&cmu_top CLK_DOUT_CORE_BUS>,
> + <&cmu_top CLK_DOUT_CORE_CCI>,
> + <&cmu_top CLK_DOUT_CORE_G3D>;
> + clock-names = "oscclk", "dout_core_bus", "dout_core_cci", "dout_core_g3d";
> + };
> +
> + cmu_top: clock-controller at 0x12060000 {
> + compatible = "samsung,exynos7885-cmu-top";
> + reg = <0x12060000 0x8000>;
> + #clock-cells = <1>;
> +
> + clocks = <&oscclk>;
> + clock-names = "oscclk";
> + };
> +
> + pinctrl_alive: pinctrl at 11cb0000 {
> + compatible = "samsung,exynos7885-pinctrl";
> + reg = <0x11cb0000 0x1000>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
Empty line.
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos7-wakeup-eint";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + pinctrl_dispaud: pinctrl at 148f0000 {
> + compatible = "samsung,exynos7885-pinctrl";
> + reg = <0x148f0000 0x1000>;
> + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + pinctrl_fsys: pinctrl at 13430000 {
> + compatible = "samsung,exynos7885-pinctrl";
> + reg = <0x13430000 0x1000>;
> + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + pinctrl_top: pinctrl at 139b0000 {
> + compatible = "samsung,exynos7885-pinctrl";
> + reg = <0x139b0000 0x1000>;
> + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + pmu_system_controller: system-controller at 11c80000 {
> + compatible = "samsung,exynos7-pmu", "syscon";
> + reg = <0x11c80000 0x10000>;
> +
> + reboot: syscon-reboot {
> + compatible = "syscon-reboot";
> + regmap = <&pmu_system_controller>;
> + offset = <0x400>; /* SWRESET */
> + mask = <0x1>;
> + };
> +
> + poweroff: syscon-poweroff {
> + compatible = "syscon-poweroff";
> + regmap = <&pmu_system_controller>;
> + offset = <0x330C>; /* PS_HOLD_CONTROL */
> + mask = <0x5200>; /* reset value */
> + };
Include arm/boot/dts/exynos-syscon-restart.dtsi instead, just like ARMv7
Exynos chips do.
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list