[PATCH v2 RESEND 1/8] dt-bindings: i2c: exynos5: Convert to dtschema

[Sam Protsenko]

Convert Samsung Exynos High Speed I2C bindings doc to DT schema format.

Changes during bindings conversion:
1. Added missing required clock properties (driver fails when it's
   unable to get the clock)
2. Removed properties and descriptions that can be found in
   schemas/i2c/i2c-controller.yaml [1]
3. Fixed the example so it can be validated by dtschema

[1] https://github.com/robherring/dt-schema/blob/master/schemas/i2c/i2c-controller.yaml

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
---
Changes in v2:
  - Added R-b tag by Krzysztof Kozlowski

 .../devicetree/bindings/i2c/i2c-exynos5.txt   | 53 ------------
 .../devicetree/bindings/i2c/i2c-exynos5.yaml  | 80 +++++++++++++++++++
 2 files changed, 80 insertions(+), 53 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml

diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
deleted file mode 100644
index 2dbc0b62daa6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Samsung's High Speed I2C controller
-
-The Samsung's High Speed I2C controller is used to interface with I2C devices
-at various speeds ranging from 100khz to 3.4Mhz.
-
-Required properties:
-  - compatible: value should be.
-	-> "samsung,exynos5-hsi2c", (DEPRECATED)
-				for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5260 SoCs.
-	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
-				on Exynos7 SoCs.
-
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - #address-cells: always 1 (for i2c addresses)
-  - #size-cells: always 0
-
-  - Pinctrl:
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - clock-frequency: Desired operating frequency in Hz of the bus.
-    -> If not specified, the bus operates in fast-speed mode at
-       at 100khz.
-    -> If specified, the bus operates in high-speed mode only if the
-       clock-frequency is >= 1Mhz.
-
-Example:
-
-hsi2c at 12ca0000 {
-	compatible = "samsung,exynos5250-hsi2c";
-	reg = <0x12ca0000 0x100>;
-	interrupts = <56>;
-	clock-frequency = <100000>;
-
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	s2mps11_pmic at 66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
new file mode 100644
index 000000000000..16853f6edc53
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-exynos5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's High Speed I2C controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
+
+description: |
+  The Samsung's High Speed I2C controller is used to interface with I2C devices
+  at various speeds ranging from 100kHz to 3.4MHz.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
+          - samsung,exynos5260-hsi2c    # Exynos5260
+          - samsung,exynos7-hsi2c       # Exynos7
+      - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+    description:
+      Desired operating frequency in Hz of the bus.
+
+      If not specified, the bus operates in fast-speed mode at 100kHz.
+
+      If specified, the bus operates in high-speed mode only if the
+      clock-frequency is >= 1MHz.
+
+  clocks:
+    maxItems: 1
+    description: I2C operating clock
+
+  clock-names:
+    const: hsi2c
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hsi2c_8: i2c at 12e00000 {
+        compatible = "samsung,exynos5250-hsi2c";
+        reg = <0x12e00000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        clocks = <&clock CLK_USI4>;
+        clock-names = "hsi2c";
+
+        pmic at 66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
-- 
2.30.2