[PATCH v2 06/10] arm64: dts: lx2160a: add pcie EP mode nodes
Li Yang
leoyang.li at nxp.com
Fri Dec 3 15:54:42 PST 2021
From: Xiaowei Bao <xiaowei.bao at nxp.com>
The LX2160A PCIe EP mode nodes based on controller used on lx2160a rev2.
Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
Signed-off-by: Li Yang <leoyang.li at nxp.com>
Reviewed-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index de680521e1d1..593c5a498ae3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1115,6 +1115,16 @@ pcie1: pcie at 3400000 {
status = "disabled";
};
+ pcie_ep1: pcie_ep at 3400000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03400000 0x0 0x00100000
+ 0x80 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
pcie2: pcie at 3500000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
@@ -1143,6 +1153,16 @@ pcie2: pcie at 3500000 {
status = "disabled";
};
+ pcie_ep2: pcie_ep at 3500000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03500000 0x0 0x00100000
+ 0x88 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
pcie3: pcie at 3600000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
@@ -1171,6 +1191,16 @@ pcie3: pcie at 3600000 {
status = "disabled";
};
+ pcie_ep3: pcie_ep at 3600000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03600000 0x0 0x00100000
+ 0x90 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <256>;
+ num-ib-windows = <24>;
+ status = "disabled";
+ };
+
pcie4: pcie at 3700000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
@@ -1199,6 +1229,16 @@ pcie4: pcie at 3700000 {
status = "disabled";
};
+ pcie_ep4: pcie_ep at 3700000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03700000 0x0 0x00100000
+ 0x98 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
pcie5: pcie at 3800000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */
@@ -1227,6 +1267,16 @@ pcie5: pcie at 3800000 {
status = "disabled";
};
+ pcie_ep5: pcie_ep at 3800000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03800000 0x0 0x00100000
+ 0xa0 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <256>;
+ num-ib-windows = <24>;
+ status = "disabled";
+ };
+
pcie6: pcie at 3900000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */
@@ -1255,6 +1305,16 @@ pcie6: pcie at 3900000 {
status = "disabled";
};
+ pcie_ep6: pcie_ep at 3900000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03900000 0x0 0x00100000
+ 0xa8 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
smmu: iommu at 5000000 {
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
--
2.25.1
More information about the linux-arm-kernel
mailing list