[RFC PATCH] watchdog: da9062: Correct the timeout values

[Christoph Niedermaier]

I measured the timeout values of my DA9061 chip. According to the
information in the data sheet the formula should be:

timeout = 2.048 * 2^(regval - 1)

But my measured values differ from that.
Accoring to my measured values the formula must be:

timeout = 3.2 * 2^(regval - 1)

Is there something wrong with my chip, or has anyone else noticed this as well?

Signed-off-by: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Support Opensource <support.opensource at diasemi.com>
Cc: Adam Thomson <Adam.Thomson.Opensource at diasemi.com>
Cc: Wim Van Sebroeck <wim at linux-watchdog.org>
Cc: Guenter Roeck <linux at roeck-us.net>
Cc: Andrej Picej <andrej.picej at norik.com>
Cc: linux-watchdog at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
To: linux-arm-kernel at lists.infradead.org
---
 drivers/watchdog/da9062_wdt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
index f02cbd530538..d2576aba9ca5 100644
--- a/drivers/watchdog/da9062_wdt.c
+++ b/drivers/watchdog/da9062_wdt.c
@@ -20,7 +20,8 @@
 #include <linux/regmap.h>
 #include <linux/of.h>
 
-static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
+static const unsigned int wdt_timeout[] = { 0, 3, 6, 12, 25, 51, 102, 204 };
+
 #define DA9062_TWDSCALE_DISABLE		0
 #define DA9062_TWDSCALE_MIN		1
 #define DA9062_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
-- 
2.11.0