[PATCH v3 05/14] ARM: remove old-style irq entry
Ard Biesheuvel
ardb at kernel.org
Fri Dec 3 02:08:54 PST 2021
From: Arnd Bergmann <arnd at arndb.de>
The last user of arch_irq_handler_default is gone now, so the
entry-macro-multi.S file and all references to mach/entry-macro.S can
be removed, as well as the asm_do_IRQ() entrypoint into the interrupt
handling routines implemented in C.
Note: The ARMv7-M entry still uses its own top-level IRQ entry, calling
nvic_handle_irq() from assembly. This could be changed to go through
generic_handle_arch_irq() as well, but it's unclear to me if there are
any benefits.
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
[ardb: keep irq_handler macro as it carries all the IRQ stack handling]
Signed-off-by: Ard Biesheuvel <ardb at kernel.org>
---
arch/arm/Kconfig | 14 ++------------
arch/arm/include/asm/entry-macro-multi.S | 16 ----------------
arch/arm/include/asm/irq.h | 1 -
arch/arm/include/asm/mach/arch.h | 2 --
arch/arm/kernel/entry-armv.S | 8 --------
arch/arm/kernel/irq.c | 17 -----------------
6 files changed, 2 insertions(+), 56 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d9ba6961b295..b0e403076227 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -58,6 +58,7 @@ config ARM
select GENERIC_CPU_AUTOPROBE
select GENERIC_EARLY_IOREMAP
select GENERIC_IDLE_POLL_SETUP
+ select GENERIC_IRQ_MULTI_HANDLER if MMU
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
@@ -320,7 +321,6 @@ config ARCH_MULTIPLATFORM
select AUTO_ZRELADDR
select TIMER_OF
select COMMON_CLK
- select GENERIC_IRQ_MULTI_HANDLER
select HAVE_PCI
select PCI_DOMAINS_GENERIC if PCI
select SPARSE_IRQ
@@ -344,7 +344,6 @@ config ARCH_EP93XX
select ARM_AMBA
imply ARM_PATCH_PHYS_VIRT
select ARM_VIC
- select GENERIC_IRQ_MULTI_HANDLER
select AUTO_ZRELADDR
select CLKSRC_MMIO
select CPU_ARM920T
@@ -359,7 +358,6 @@ config ARCH_FOOTBRIDGE
select FOOTBRIDGE
select NEED_MACH_IO_H if !MMU
select NEED_MACH_MEMORY_H
- select GENERIC_IRQ_MULTI_HANDLER
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -368,7 +366,6 @@ config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
- select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IOP
select GPIOLIB
select FORCE_PCI
@@ -384,7 +381,6 @@ config ARCH_IXP4XX
select ARCH_SUPPORTS_BIG_ENDIAN
select CPU_XSCALE
select DMABOUNCE if PCI
- select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IXP4XX
select GPIOLIB
select HAVE_PCI
@@ -400,7 +396,6 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select CPU_PJ4
- select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_PCI
select MVEBU_MBUS
@@ -423,7 +418,6 @@ config ARCH_PXA
select CLKSRC_MMIO
select TIMER_OF
select CPU_XSCALE if !CPU_XSC3
- select GENERIC_IRQ_MULTI_HANDLER
select GPIO_PXA
select GPIOLIB
select IRQ_DOMAIN
@@ -442,7 +436,6 @@ config ARCH_RPC
select ARM_HAS_SG_CHAIN
select CPU_SA110
select FIQ
- select GENERIC_IRQ_MULTI_HANDLER
select HAVE_PATA_PLATFORM
select ISA_DMA_API
select LEGACY_TIMER_TICK
@@ -463,7 +456,6 @@ config ARCH_SA1100
select COMMON_CLK
select CPU_FREQ
select CPU_SA1100
- select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select IRQ_DOMAIN
select ISA
@@ -478,7 +470,6 @@ config ARCH_S3C24XX
select CLKSRC_SAMSUNG_PWM
select GPIO_SAMSUNG
select GPIOLIB
- select GENERIC_IRQ_MULTI_HANDLER
select HAVE_S3C2410_I2C if I2C
select NEED_MACH_IO_H
select S3C2410_WATCHDOG
@@ -497,7 +488,6 @@ config ARCH_OMAP1
select ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_LEGACY_CLK
select IRQ_DOMAIN
@@ -1168,7 +1158,7 @@ config CURRENT_POINTER_IN_TPIDRURO
config IRQSTACKS
def_bool y
- depends on GENERIC_IRQ_MULTI_HANDLER && THREAD_INFO_IN_TASK
+ depends on THREAD_INFO_IN_TASK
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_SOFTIRQ_ON_OWN_STACK
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
deleted file mode 100644
index 24486dad9e19..000000000000
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/assembler.h>
-
-/*
- * Interrupt handling. Preserves r7, r8, r9
- */
- .macro arch_irq_handler_default
- get_irqnr_preamble r6, lr
-1: get_irqnr_and_base r0, r2, r6, lr
- movne r1, sp
- @
- @ routine called with r0 = irq number, r1 = struct pt_regs *
- @
- badrne lr, 1b
- bne asm_do_IRQ
- .endm
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 1cbcc462b07e..a7c2337b0c7d 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -26,7 +26,6 @@
struct irqaction;
struct pt_regs;
-extern void asm_do_IRQ(unsigned int, struct pt_regs *);
void handle_IRQ(unsigned int, struct pt_regs *);
void init_IRQ(void);
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index eec0c0bda766..9349e7a82c9c 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -56,9 +56,7 @@ struct machine_desc {
void (*init_time)(void);
void (*init_machine)(void);
void (*init_late)(void);
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
void (*handle_irq)(struct pt_regs *);
-#endif
void (*restart)(enum reboot_mode, const char *);
};
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 5fb7465d14d9..9744d087ee9f 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -19,9 +19,6 @@
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
#include <asm/vfpmacros.h>
-#ifndef CONFIG_GENERIC_IRQ_MULTI_HANDLER
-#include <mach/entry-macro.S>
-#endif
#include <asm/thread_notify.h>
#include <asm/unwind.h>
#include <asm/unistd.h>
@@ -30,14 +27,12 @@
#include <asm/uaccess-asm.h>
#include "entry-header.S"
-#include <asm/entry-macro-multi.S>
#include <asm/probes.h>
/*
* Interrupt handling.
*/
.macro irq_handler, from_user:req
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
mov r0, sp
#ifdef CONFIG_IRQSTACKS
mov_l r2, irq_stack_ptr @ Take base address
@@ -92,9 +87,6 @@ UNWIND( .setfp fpreg, sp )
mov sp, r9 @ Restore original SP
#endif // CONFIG_UNWINDER_ARM
#endif // CONFIG_IRQSTACKS
-#else
- arch_irq_handler_default
-#endif
.endm
.macro pabt_helper
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 5deb40f39999..5c6f8d11a3ce 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -120,23 +120,6 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs)
ack_bad_irq(irq);
}
-/*
- * asm_do_IRQ is the interface to be used from assembly code.
- */
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
- struct pt_regs *old_regs;
-
- irq_enter();
- old_regs = set_irq_regs(regs);
-
- handle_IRQ(irq, regs);
-
- set_irq_regs(old_regs);
- irq_exit();
-}
-
void __init init_IRQ(void)
{
int ret;
--
2.30.2
More information about the linux-arm-kernel
mailing list