[RFC 0/5] arm64: imx8mm: Enable Hantro VPUs
Nicolas Dufresne
nicolas at ndufresne.ca
Thu Dec 2 20:34:14 PST 2021
Le mardi 30 novembre 2021 à 11:28 -0800, Tim Harvey a écrit :
> On Tue, Nov 30, 2021 at 6:00 AM Ezequiel Garcia
> <ezequiel at vanguardiasur.com.ar> wrote:
> >
> > Hi Tim,
> >
> > On Mon, 29 Nov 2021 at 16:36, Tim Harvey <tharvey at gateworks.com> wrote:
> > >
> > > On Mon, Nov 29, 2021 at 10:59 AM Adam Ford <aford173 at gmail.com> wrote:
> > ..
> > > >
> > >
> > > Adam,
> > >
> > > What deps did you install in order to get v4l2codecs building? I
> > > installed libgudev-1.0-dev based on Nicolas' suggestion and rebuilt
> > > (not sure if I needed to re-configure somehow) but there is still
> > > nothing in build/subprojects/gst-plugins-bad/sys/v4l2codecs/. A 'meson
> > > configure' tells me that v4l2codecs is set to 'auto' but I'm not sure
> > > how to find out what dependencies are needed or what may be missing.
> > >
> >
> > At least in my case (Centps-derivative), this is what I've done:
> >
> > ...
> > gst-plugins-bad| Run-time dependency gudev-1.0 found: NO (tried
> > pkgconfig and cmake)
> >
> > Installed gudev ... and then:
> >
> > ...
> > gst-plugins-bad| Dependency gudev-1.0 found: YES 232 (cached)
> > ...
> > gst-plugins-bad 1.19.3.1
> >
> > Plugins : accurip, adpcmdec, adpcmenc, aiff, asfmux,
> > audiobuffersplit, audiofxbad, audiomixmatrix, audiolatency,
> > audiovisualizers, autoconvert, bayer,
> > camerabin, codecalpha, coloreffects,
> > debugutilsbad, dvbsubenc, dvbsuboverlay, dvdspu, faceoverlay,
> > festival, fieldanalysis, freeverb, frei0r,
> > gaudieffects, gdp, geometrictransform,
> > id3tag, inter, interlace, ivfparse, ivtc, jp2kdecimator, jpegformat,
> > rfbsrc, midi, mpegpsdemux,
> > mpegpsmux, mpegtsdemux, mpegtsmux, mxf,
> > netsim, rtponvif, pcapparse, pnm, proxy, legacyrawparse,
> > removesilence, rist, rtmp2, rtpmanagerbad,
> > sdpelem, segmentclip, siren, smooth,
> > speed, subenc, switchbin, timecode, transcode, videofiltersbad,
> > videoframe_audiolevel, videoparsersbad,
> > videosignal, vmnc, y4mdec, decklink, dvb,
> > fbdevsink, ipcpipeline, nvcodec, shm, v4l2codecs, hls, sctp
> >
> > GStreamer current master build fails. It's a known issue which will be
> > fixed today:
> >
> > [...]
> > [8/9] Compiling C object
> > subprojects/gst-plugins-bad/sys/v4l2codecs/libgstv4l2codecs.so.p/gstv4l2codecvp9dec.c.o
> > FAILED: subprojects/gst-plugins-bad/sys/v4l2codecs/libgstv4l2codecs.so.p/gstv4l2codecvp9dec.c.o
> > cc -Isubprojects/gst-plugins-bad/sys/v4l2codecs/libgstv4l2codecs.so.p
> > -Isubprojects/gst-plugins-bad/sys/v4l2codecs
> > -I../subprojects/gst-plugins-bad/sys/v4l2codecs
> > -Isubprojects/gst-plugins-bad -I../subprojects/gst-plugins-bad
> > -Isubprojects/gstreamer/libs -I../subprojects/gstreamer/libs
> > -Isubprojects/gstreamer -I../subprojects/gstreamer
> > -Isubprojects/gst-plugins-bad/gst-libs
> > -I../subprojects/gst-plugins-bad/gst-libs
> > -Isubprojects/gst-plugins-base/gst-libs
> > -I../subprojects/gst-plugins-base/gst-libs -Isubprojects/orc
> > -I../subprojects/orc -Isubprojects/gstreamer/gst
> > -Isubprojects/gst-plugins-base/gst-libs/gst/video
> > -Isubprojects/gst-plugins-base/gst-libs/gst/pbutils
> > -Isubprojects/gst-plugins-base/gst-libs/gst/audio
> > -Isubprojects/gst-plugins-base/gst-libs/gst/tag
> > -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include
> > -I/usr/include/gudev-1.0 -fdiagnostics-color=always
> > -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -O2 -g -fvisibility=hidden
> > -fno-strict-aliasing -DG_DISABLE_DEPRECATED -Wmissing-prototypes
> > -Wdeclaration-after-statement -Wold-style-definition
> > -Wmissing-declarations -Wredundant-decls -Wwrite-strings -Wformat
> > -Wformat-security -Winit-self -Wmissing-include-dirs -Waddress
> > -Wno-multichar -Wvla -Wpointer-arith -fPIC -pthread -DHAVE_CONFIG_H
> > -MD -MQ subprojects/gst-plugins-bad/sys/v4l2codecs/libgstv4l2codecs.so.p/gstv4l2codecvp9dec.c.o
> > -MF subprojects/gst-plugins-bad/sys/v4l2codecs/libgstv4l2codecs.so.p/gstv4l2codecvp9dec.c.o.d
> > -o subprojects/gst-plugins-bad/sys/v4l2codecs/libgstv4l2codecs.so.p/gstv4l2codecvp9dec.c.o
> > -c ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codecvp9dec.c
> > ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codecvp9dec.c:92:3:
> > error: unknown type name ‘grefcount’
> > grefcount ref_count;
> > ^~~~~~~~~
> > ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codecvp9dec.c: In
> > function ‘gst_v4l2_codec_vp9_dec_picture_data_new’:
> > ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codecvp9dec.c:106:3:
> > warning: implicit declaration of function ‘g_ref_count_init’; did you
> > mean ‘g_cond_init’? [-Wimplicit-function-declaration]
> > g_ref_count_init (&pic_data->ref_count);
> > ^~~~~~~~~~~~~~~~
> > g_cond_init
> > ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codecvp9dec.c: In
> > function ‘gst_v4l2_codec_vp9_dec_picture_data_ref’:
> > ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codecvp9dec.c:118:3:
> > warning: implicit declaration of function ‘g_ref_count_inc’; did you
> > mean ‘g_strv_contains’? [-Wimplicit-function-declaration]
> > g_ref_count_inc (&data->ref_count);
> > ^~~~~~~~~~~~~~~
> > g_strv_contains
> > ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codecvp9dec.c: In
> > function ‘gst_v4l2_codec_vp9_dec_picture_data_unref’:
> > ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codecvp9dec.c:125:7:
> > warning: implicit declaration of function ‘g_ref_count_dec’
> > [-Wimplicit-function-declaration]
> > if (g_ref_count_dec (&data->ref_count)) {
> > ^~~~~~~~~~~~~~~
> > ninja: build stopped: subcommand failed.
> >
> > Hope this helps get you started!
> > Ezequiel
>
> Ezequiel and Nicolas,
>
> Thanks - I did manage to get gstreamer 1.19.3 built successfully with
> v4l2codecs finally by getting the correct dependencies. I've attempted
> to software encode from another system and decode/display on the IMX8M
> Mini but thus far have not been successful.
>
> I see that v4l2codecs plugin v4l2slh264dec/v4l2slmpeg2dec/v4l2slvp8dec
> and these all can output video/x-raw NV12/YUY2 which kmssink should
> accept so I'm attempting the following :
>
> # vp8 encode from x86
> gst-launch-1.0 -v videotestsrc ! video/x-raw,width=800,height=480 !
> vp8enc ! rtpvp8pay ! udpsink host=172.24.33.15 port=9001
> # vp8 decode on imx8mm at 172.24.33.15 which has a 800x480 display
> [gst-main] root at focal-venice:~/gstreamer/build# gst-launch-1.0 -v
> udpsrc port=9001 caps = "application/x-rtp, media=(string)video,
> clock-rate=(int)90000, encoding-name=(string)VP8, payload=(int)96,
> ssrc=(uint)2745262155, timestamp-offset=(uint)2515032683,
> seqnum-offset=(uint)19579, a-framerate=(string)30" ! rtpvp8depay !
> v4l2slvp8dec ! kmssink
> Setting pipeline to PAUSED ...
> Pipeline is live and does not need PREROLL ...
> /GstPipeline:pipeline0/GstKMSSink:kmssink0: display-width = 800
> /GstPipeline:pipeline0/GstKMSSink:kmssink0: display-height = 480
> Pipeline is PREROLLED ...
> Setting pipeline to PLAYING ...
> /GstPipeline:pipeline0/GstUDPSrc:udpsrc0.GstPad:src: caps =
> application/x-rtp, media=(string)video, clock-rate=(int)90000,
> encoding-name=(string)VP8, payload=(int)96, ssrc=(uint)2745262155,
> timestamp-offset=(uint)2515032683, seqnum-offset=(uint)19579,
> a-framerate=(string)30
> New clock: GstSystemClock
> /GstPipeline:pipeline0/GstRtpVP8Depay:rtpvp8depay0.GstPad:sink: caps =
> application/x-rtp, media=(string)video, clock-rate=(int)90000,
> encoding-name=(string)VP8, payload=(int)96, ssrc=(uint)2745262155,
> timestamp-offset=(uint)2515032683, seqnum-offset=(uint)19579,
> a-framerate=(string)30
> /GstPipeline:pipeline0/GstRtpVP8Depay:rtpvp8depay0.GstPad:src: caps =
> video/x-vp8, framerate=(fraction)0/1, height=(int)480, width=(int)800,
> profile=(string)0
> ERROR: from element /GstPipeline:pipeline0/GstUDPSrc:udpsrc0: Internal
> data stream error.
> Additional debug info:
> ../subprojects/gstreamer/libs/gst/base/gstbasesrc.c(3127):
> gst_base_src_loop (): /GstPipeline:pipeline0/GstUDPSrc:udpsrc0:
> streaming stopped, reason not-negotiated (-4)
> Execution ended after 0:00:02.076839644
> Setting pipeline to NULL ...
> Freeing pipeline ...
>
> I'm getting the same thing when trying to use h264.
>
> I've never quite been able to grasp how to debug GStreamer's
> negotiation issues. If I end with fakesink it appears to decode so it
> must be the v4l2slvp8dec to kmssink. I tried forcing the pixel format
> using 'v4l2slvp8dec ! "video/x-raw,format=(string)NV12" ! kmssink' but
> I still get the negotiation error.
>
> What interrupts should I be seeing in /proc/interrupts? I don't see
> anything vpu/hantro related there.
>
> I also want to make sure I have a basic understanding of the vpu
> drivers and usersapce on the IMX8M Mini. The IMX6Q/DL that I'm more
> familiar with has a vpu that is supported by the GStreamer video4linux
> plugin which shows the following (on GStreamer 1.16.2):
> v4l2jpegenc: V4L2 JPEG Encoder
> v4l2jpegdec: V4L2 JPEG Decoder
> v4l2h264enc: V4L2 H.264 Encoder
> v4l2mpeg4enc: V4L2 MPEG4 Encoder
> v4l2mpeg4dec: V4L2 MPEG4 Decoder
> v4l2mpeg2dec: V4L2 MPEG2 Decoder
> v4l2h264dec: V4L2 H264 Decoder
> The IMX6Q/DL also has an IPU that has an M2M driver that provides the
> following for scaling/colorspace conversion:
> v4l2convert: V4L2 Video Converter
>
> I believe what I'm reading is that the IMX8M Mini Hantro codecs are
> 'stateful' where more software is required to drive them and is
'stateless'. the rest is right.
> supported by the newer v4l2codecs plugin. I haven't been able to
> understand what kernel version/requirements the v4l2codecs plugin
> users/requires.
After H264 debacle with 5.9, 5.10 and 5.11 API break and GStreamer not getting
enough release to support all of these we started merging support for CODECs
only when the stable uAPI land. I made an exception for VP9 as it is already
applied in the media tree and didn't want to miss 1.20 release.
So to answer you question, it depends on when the CODEC uAPI landed.
>
> I'm also trying to understand how we can get scaling/colorspace
> conversion on the IMX8M Mini. The IMX8M lacks an IPU... is there some
> way to utilize scaling/colorspace conversion from the 2D GPU bound to
> the etnaviv driver?
The concept of the mini, is that you would be using th encoder for anything that
isn't going to the display. So they only integrated the Hantro PP on the
encoder. Unfortunately, you'll have to be patient for mainline stateless encoder
support, we barely scratch the surface of this subject, but its being worked on.
Unlike the IMX8MQ, you don't have the option to output YUYV (packed yuv 4:2:2)
which would satisfy the 2D GPU support hoold to the DMABuf import path.
When the display driver gets ready and upstream (it's been only 2-3 years now),
you'll get linear NV12 support along with G2 compression support (this one is
not supported by the GPU, so it will be tricky to expose in userland). I don't
think the display support 4L4 tiles, but you GPU most likely can do with the
right shared and texelFetch() or vulkan equivalent if that exist on that target.
>
> Best regards,
>
> Tim
regards,
Nicolas
More information about the linux-arm-kernel
mailing list